homekitchenart 
Nowadays, there are so many products of 18 inch heating air duct deflectors in the market and you are wondering to choose a best one. You have searched for 18 inch heating air duct deflectors in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings 18 inch heating air duct deflectors which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
Accord ABBBWH18 Baseboard Register with Sunburst Design, 18-Inch(Duct Opening Measurement), White
- Steel construction
- For floor application, 2-3/4-in projection
- 180˚ air deflection with a volume control damper
- Removable faceplate for easy installation and cleaning
- Actual length of item is 18-inches
- inside duct opening measurement of item is 15-inches to accommodate the 1 ½-inch wide flanges on each end
Accord Ventilation model ABBBWH18 is a white, 18-Inch(Duct Opening Measurement), baseboard register with a sunburst design. To determine the correct size to order, measure the size of the duct opening (not the old vent itself). Each Accord Ventilation product is crafted using high quality materials that provide strength and durability. Accord Ventilation produces floor registers, grates, and vents in a variety of designs and sizes. Accord Ventilation products are sure to enhance any home decor. Our Lifetime Limited Warranty covers every floor register, vent, grate, and grille manufactured by Accord Ventilation.
Accord APBBDF Adjustable 15-Inch to 24-Inch x 4-1/2-Inch Magnetic Baseboard Air Deflector
Product Description
Accord Ventilation model APBBDF is a 15-Inch to 24-Inch x 4-1/2-Inch, Magnetic, Adjustable Air Deflector for Steel Baseboard Air Deflectors. Each Accord Ventilation product is crafted using high quality materials that provide strength and durability. Accord Ventilation produces floor registers, grates, and vents in a variety of designs and sizes. Accord Ventilation products are sure to enhance any home decor. Our Lifetime Limited Warranty covers every floor register, vent, grate, and grille manufactured by Accord Ventilation.
From the Manufacturer
Accord ventilation products are manufactured using high quality materials that provide strength and durability. This adjustable magnetic baseboard air deflector is the perfect solution when you have drapes or furniture blocking airflow out of a vent or to deflect air to another part of the room.
Similar items with 4 stars and above
Strong Magnetic Vent Covers for Ceiling and Wall Vents – 2 Pack 8”x15” Includes 8 Additional Magnets for Guaranteed Holding Strength Can Be Cut Down to Smaller Sizes
- GUARANTEED MANGETIC STRENGTH – includes 8 powerful neodymium magnets strong enough to block air flow to any metal vent or register (doesn’t work on aluminum vents)
- SAVE ON ENERGY BILLS – blocks air flow to all metal vents – HVAC, AC, home, RV, fireplace, floor, furnace, wall, air conditioning, cold air return, dryer, vent hood, heat vent, exhaust, foundation, commercial
- WORKS ON MOST VENT SIZES – can easily be cut down with a pair of scissors to any of the following sizes: 5×12, 5.5×12, 8×8, 8×12, 6×12, 4×12, 11×7, 4×10, 6×12, 7×11
- PAINT IT ANY COLOR: vent covers are white, but can be painted any color you like
16"w X 12"h Steel Return Air Grilles – Sidewall and Ceiling – HVAC Duct Cover – White [Outer Dimensions: 17.75"w X 13.75"h]
- 16″w X 12″h Is The Size For The Duct Opening Measurement Only, Actual Front End Outer Dimensions Are 17.75″ Width X “w X 13.75” Height – SEE BELOW IN DESCRIPTION HOW TO MEASURE A GRILLE
- High Quality Solid Stamped steel with Counter-Sunk Screw Holes (Screws Included) and No Sharp Edges
- Carefully Shrink Wrapped With Cardboard Backing To Prevent Damage In Shipment
- Easy Unrestricted Air Flow For Your HVAC System – 50° angled to provide maximum airflow
- Powder-Coat Finish – Smooth, Shiny, Scratch-Resistant, Beautiful. Looks Like It Was Just Waxed
16″w X 12″h Steel Return Air Grilles – Sidewall and Cieling – HVAC DUCT COVER – White
16″w X 12″h Is The Size For The Duct Opening Measurement Only, Actual Front End Outer Dimensions Are 17.75″ Width X “w X 13.75” Height – SEE BELOW IN DESCRIPTION HOW TO MEASURE A GRILLE
You may think of grilles and registers as a generic component of the ventilation system in your house. But they are also the most visible representation of you air system.
These grilles and registers give you an extra measure of quality that are visible to your family members and house guests.
Some of the best features aren’t readily apparent, but you will appreciate the benefits over the period of time.
This grille has a high standard of design, production and finish on all products.
Every part is hand inspected for quality before it is packaged, no exceptions.
No Sharp Surface Edges. Just run your finger along the edge of the top plate and you will find a smooth finished surface.
Powder-Coat Finish – Smooth, Shiny, Scratch-Resistant, Beautiful. Looks Like It Was Just Waxed
Quality Packaging – Carefully Shrink Wrapped With Cardboard Backing To Prevent Damage In Shipment
Easy Unrestricted Air Flow.
How To Measure A Grille
Overall Size:
Measure the size of the air duct/drywall opening. Do not measure the overall size of the register itself, only measure the “hole” in the wall/duct. Every grille has a front end frame, that will overlap at wall joint.
Total outer size of this grille is; listed size +1.75″.
Width vs Height
The first number in a grille size, represents the width, the second number represents the height. Example: If your hole is 20″ wide by 14″ tall, order a 20×14. If your hole is 14″ wide by 20″ tall, order a 14×20.
18" x 26" Return Air Grille – Sidewall and Ceiling – HVAC Vent Duct Cover Diffuser – [White] [Outer Dimensions: 19.75w X 27.75"h]
- 18″w X 26″h Is The Size For The Duct Opening Measurement Only, Actual Front End Outer Dimensions Are 19.75″ Width X 27.75″ Height – SEE IN DESCRIPTION HOW TO MEASURE A GRILLE PROPERLY
- High Quality Solid Stamped steel with Counter-Sunk Screw Holes (Screws Included) and No Sharp Edges
- Carefully Shrink Wrapped With Cardboard Backing To Prevent Damage In Shipment
- Easy Unrestricted Air Flow For Your HVAC System – 50° angled to provide maximum airflow
- Powder-Coat Finish – Smooth, Shiny, Scratch-Resistant, Beautiful. Looks Like It Was Just Waxed
18″ x 26″ Return Air Grille – Sidewall and Cieling – HVAC Vent Duct Cover Diffuser – [White]
18″w X 26″h Is The Size For The Duct Opening Measurement Only, Actual Front End Outer Dimensions Are 19.75″ Width X 27.75″ Height – SEE IN DESCRIPTION HOW TO MEASURE A GRILLE PROPERLY
Why HVAC Premium?
You may think of grilles and registers as a generic component of the ventilation system in your house. But they are also the most visible representation of you air system.
With HVAC Premium you get an extra measure of quality that will be visible to your family members and house guests.
Every part is hand inspected for quality before it is packaged, no exceptions.
No Sharp Surface Edges. Just run your finger along the edge of the top plate and you will find a smooth finished surface.
Heavy Gauge Steel. Heavier gauge than needed, built for durability and long life in mind, but still light and handy.
Powder-Coat Finish – Smooth, Shiny, Scratch-Resistant, Beautiful. Looks Like It Was Just Waxed
How To Measure A Grille
Overall Size:
Measure the size of the air duct/drywall opening. Do not measure the overall size of the register itself, only measure the “hole” in the wall/duct. Every grille has a front end frame, that will overlap at wall joint.
Total outer size of this grille is; listed size +1.75″.
Width vs Height
The first number in a grille size, represents the width, the second number represents the height. Example: If your hole is 20″ wide by 14″ tall, order a 20×14. If your hole is 14″ wide by 20″ tall, order a 14×20.
100% Satisfaction Guaranteed
Don’t worry, you’re covered by our 100% Money Back Guarantee, no questions asked. Click Add to Cart now & enjoy a new updated refreshing look of your room.
Similar items with 4 stars and above
18"w X 6"h Steel Return Air Grilles – Sidewall and Ceiling – HVAC Duct Cover – White [Outer Dimensions: 19.75"w X 7.75"h]
- 18″w X 6″h Is The Size For The Duct Opening Measurement Only, Actual Front End Outer Dimensions Are 19.75″ Width X 7.75″ Height – SEE BELOW IN DESCRIPTION HOW TO MEASURE A GRILLE
- HIGH QUALITY Solid Stamped Steel Construction With Recessed Screw Holes (SCREWS INCLUDED) To Easily Install On Ceiling Or Sidewall
- QUALITY PACKAGING – Carefully Shrink Wrapped With Solid Cardboard Backing To Prevent Damage In Shipment – Hand Inspected for Quality
- HEAVY STEEL CONSTRUCTION – No Scuff Powder Coat Finish – Smooth, Shiny, Scratch-Resistant, Beautiful. Looks Like It Was Just Waxed
- UNRESTRICTED AIRFLOW For Your HVAC System – 50° Angled To Provide Maximum Airflow – ½ Inch Spaced Fins
HVAC Premium has been providing superior in quality service for many many years. Our products are second to none, and we’ve helped numerous contractors,
DIY projects, and home improvement remodeling specialists complete their masterpiece. If you are looking for a top of the line unit to enhance your project
look no further than HVAC Premium. We have the largest selection of Grilles Registers and Diffusers.
HVAC Premium has sold over 5,000,000 Grilles – We are proud of our many happy customers!
18″w X 6″h Is The Size For The Duct Opening Measurement Only, Actual Front End Outer Dimensions Are 19.75″ Width X 7.75″ Height – SEE BELOW IN DESCRIPTION HOW TO MEASURE A GRILLE
You may think of grilles and registers as a generic component of the ventilation system in your house. But they are also the most visible representation of you air system.
These grilles and registers give you an extra measure of quality that are visible to your family members and house guests.
This grille has a high standard of design, production and finish on all products.
How To Measure A Grille
Overall Size: MEASURE the size of the DUCT OPENING. Do not measure the old vent cover. If your duct opening is 14″ wide by 20″ tall, order a 14×20.
Width vs Height
The first number in a grille size, represents the width, the second number represents the height. Example: If your hole is 20″ wide by 14″ tall, order a
20×14. If your hole is 14″ wide by 20″ tall, order a 14×20.
100% Satisfaction Guaranteed
Don’t worry, you’re covered by our 100% moneyback guarantee no questions asked. Click Add to Cart Now! and enjoy a new updated refreshing look to your home.
30"w X 18"h Steel Return Air Grilles – Sidewall and Ceiling – HVAC Duct Cover – White [Outer Dimensions: 31.75"w X 19.75"h]
- 30″w X 18″h Is The Size For The Duct Opening Measurement Only, Actual Front End Outer Dimensions Are 31.75″ Width X 19.75″ Height – SEE BELOW IN DESCRIPTION HOW TO MEASURE A GRILLE
- HIGH QUALITY Solid Stamped Steel Construction With Recessed Screw Holes (SCREWS INCLUDED) To Easily Install On Ceiling Or Sidewall
- QUALITY PACKAGING – Carefully Shrink Wrapped With Solid Cardboard Backing To Prevent Damage In Shipment – Hand Inspected for Quality
- HEAVY STEEL CONSTRUCTION – No Scuff Powder Coat Finish – Smooth, Shiny, Scratch-Resistant, Beautiful. Looks Like It Was Just Waxed
- UNRESTRICTED AIRFLOW For Your HVAC System – 50° Angled To Provide Maximum Airflow – ½ Inch Spaced Fins
HVAC Premium has been providing superior in quality service for many many years. Our products are second to none, and we’ve helped numerous contractors,
DIY projects, and home improvement remodeling specialists complete their masterpiece. If you are looking for a top of the line unit to enhance your project
look no further than HVAC Premium. We have the largest selection of Grilles Registers and Diffusers.
HVAC Premium has sold over 5,000,000 Grilles – We are proud of our many happy customers!
30″w X 18″h Is The Size For The Duct Opening Measurement Only, Actual Front End Outer Dimensions Are 31.75″ Width X 19.75″ Height – SEE BELOW IN DESCRIPTION HOW TO MEASURE A GRILLE
You may think of grilles and registers as a generic component of the ventilation system in your house. But they are also the most visible representation of you air system.
These grilles and registers give you an extra measure of quality that are visible to your family members and house guests.
This grille has a high standard of design, production and finish on all products.
How To Measure A Grille
Overall Size: MEASURE the size of the DUCT OPENING. Do not measure the old vent cover. If your duct opening is 14″ wide by 20″ tall, order a 14×20.
Width vs Height
The first number in a grille size, represents the width, the second number represents the height. Example: If your hole is 20″ wide by 14″ tall, order a
20×14. If your hole is 14″ wide by 20″ tall, order a 14×20.
100% Satisfaction Guaranteed
Don’t worry, you’re covered by our 100% moneyback guarantee no questions asked. Click Add to Cart Now! and enjoy a new updated refreshing look to your home.
18" X 18" Adjustable AIR Supply Diffuser – HVAC Vent Cover Sidewall or Ceiling – Grille Register – High Airflow – White [Outer Dimensions: 19.75"w X 19.75"h]
- 18″w X 18″h Is The Size For The Duct Opening Measurement Only Actual Front End Frame Outer Dimensions Are 19.75″w X 19.75″h – SEE BELOW IN DESCRIPTION HOW TO MEASURE A GRILLE
- High Quality Steel Construction, No Scuff Powder Coat Durable Finish, Smooth, Shiny, Scratch-Resistant, No Sharp Edges, 2 Recessed Screw Holes On Each Side with Screws Included, Screws Same Color As Vent Cover, EASY INSTALLATION
- LOUVERED Adjustable Register Grille for Sidewall or Ceiling Application, Easy Opening and Closing Back Dampers For Better Airflow Control, Quiet and Smooth Control Lever, Noise Free Components
- QUALITY PACKAGING – Carefully Shrink Wrapped With Cardboard Backing To Prevent Damage In Shipment – Hand Inspected for Quality
- EACH INDIVIDUAL FIN IS ADJUSTABLE FOR MAX AIRFLOW CONTROL – Adjust The Fins To Open or Close From the Front – Easy Unrestricted Air Flow Deflection For Your HVAC System
18″ X 18″ ADJUSTABLE AIR SUPPLY DIFFUSER – HVAC Vent Cover Sidewall or Ceiling – Grille Register – High Airflow – White [Outer Dimensions: 19.75″w X 19.75″h]
18″w X 18″h Is The Size For The Duct Opening Measurement Only Actual Front End Frame Outer Dimensions Are 19.75″w X 19.75″h – SEE BELOW IN DESCRIPTION HOW TO MEASURE A GRILLE
You may think of grilles and registers as a generic component of the ventilation system in your house.
But they are also the most visible representation of you air system.
These grilles and registers give you an extra measure of quality that you can point out to your family members and house guests.
Some of our best features aren’t readily apparent, but you’ll appreciate the benefits over a long period of time.
This grille has a high standard of design, production and finish on all products.
Every part is hand inspected for quality before it is packaged, no exceptions.
Quality Packaging – Carefully Shrink Wrapped With Cardboard Backing To Prevent Damage In Shipment
Easy Unrestricted Air Flow.
How To Measure A Grille
Overall Size:
Measure the size of the air duct/drywall opening. Do not measure the overall size of the register itself, only measure the “”hole”” in the wall/duct. Every grille has a front end frame, that will overlap at wall joint.
Total outer size of this grille is; listed size +1.875″” at the width, and + 2″” at the height.
Width vs Height
The first number in a grille size, represents the width, the second number represents the height. Example: If your hole is 20″” wide by 14″” tall, order a 20×14. If your hole is 14″” wide by 20″” tall, order a 14×20.
100% Satisfaction Guaranteed
Don’t worry, you’re covered by our 100% moneyback guarantee no questions asked. Click Add to Cart Now! and enjoy a new updated refreshing look to your home.
18" x 22" Cube Core Eggcrate Return Air Grille – Aluminum Rust Proof – HVAC Vent Duct Cover – White [Outer Dimensions: 20.75"w X 24.75"h]
- 18″w X 22″h Is The Size For The Duct Opening Measurement Only, Actual Front End Outer Dimensions Are 20.5″ Width X 24.5″ Height – CAN ALSO BE USED AS 22 X 18
- SAVE MONEY ON YOUR BILL – PRESERVE YOUR HVAC UNIT – Highest Rate Of Air Flow Efficiency – Almost 95%
- Carefully Shrink Wrapped With Cardboard Backing To Prevent Damage In Shipment
- NEVER RUST – Aluminum Frame & Aluminum Cube Core
- Powder-Coat Finish – Smooth, Shiny, Scratch-Resistant, Beautiful. Looks Like It Was Just Waxed
18″ x 22″ Cube Core Eggcrate Return Air Filter Grille for 1″ Filter – Aluminum – White
Can also be used as a 22″ x 18″
Actual Front End Overlapping Outer Dimensions Are 20.5″ Width X 24.5″ Height – SEE IN DESCRIPTION HOW TO MEASURE A GRILLE
Why Cubic Core Eggcrate?
Cubic Core Eggcrate design has the highest rate of air flow efficiency – almost 95% – thereby saving you money on your electric bill, and preserving the lifetime quality of your HVAC machine.
And as a bonus on the side, you get a much quieter HVAC system, as the air does not have to force itself through.
And if that’s not enough, you can bet on the impressions it will make on your house visitors, as this has an upscale luxury look to it.
Why Aluminum?
Aluminum will Never Rust, and will last you a lifetime.
Why HVAC Premium?
You may think of grilles and registers as a generic component of the ventilation system in your house. But they are also the most visible representation of you air system.
With HVAC Premium you get an extra measure of quality that will be visible to your family members and house guests.
How To Measure A Grille
Overall Size:
Measure the size of the air duct/drywall opening. Do not measure the overall size of the register itself, only measure the “hole” in the wall/duct. Every grille has a front end frame, that will overlap at wall joint.
Total outer size of this grille is; listed size +2.5″.
Width vs. Height
On this model of Cubic Core Eggcrate design, it will look the same either direction, so feel free to order it any way it goes.
For Example: You can use a 14″ x 20″ as a 20″ x 14″, and it will all look the same.
100% Satisfaction Guaranteed
Don’t worry, you’re covered by our 100% Money Back Guarantee, no questions asked. Click Add to Cart now & enjoy a new updated refreshing look of your room.
18" X 18" Steel Return Air Grilles – Sidewall and Ceiling – HVAC Duct Cover – Black [Outer Dimensions: 19.75"w X 19.75"h]
- 18″w X 18″h Is The Size For The Duct Opening Measurement Only, Actual Front End Outer Dimensions Are 19.75″ Width X 19.75″ Height – SEE BELOW IN DESCRIPTION HOW TO MEASURE A GRILLE
- High Quality Solid Stamped steel with Counter-Sunk Screw Holes (Screws Included) and No Sharp Edges
- Carefully Shrink Wrapped With Cardboard Backing To Prevent Damage In Shipment
- Easy Unrestricted Air Flow For Your HVAC System – 50° angled to provide maximum airflow
- Q: Why BLACK? A: Black Grilles Always Look Sharp And Never Show DIrt & Dust Marks
18″ X 18″ Steel Return Air Grilles – Sidewall and Cieling – HVAC DUCT COVER – Black
18″w X 18″h Is The Size For The Duct Opening Measurement Only, Actual Front End Outer Dimensions Are 19.75″ Width X 19.75″ Height – SEE BELOW IN DESCRIPTION How To Measure A Grille
Why BLACK? Simple, Because Black Grilles Always Look Sharp And Never Show DIrt & Dust Marks
You may think of grilles and registers as a generic component of the ventilation system in your house. But they are also the most visible representation of you air system.
These grilles and registers give you an extra measure of quality that are visible to your family members and house guests.
Some of the best features aren’t readily apparent, but you will appreciate the benefits over the period of time.
This grille has a high standard of design, production and finish on all products.
Every part is hand inspected for quality before it is packaged, no exceptions.
No Sharp Surface Edges. Just run your finger along the edge of the top plate and you will find a smooth finished surface.
Heavy Gauge Steel. Heavier gauge than needed, built for durability and long life in mind, but still light and handy.
Powder-Coat Finish – Smooth, Shiny, Scratch-Resistant, Beautiful. Looks Like It Was Just Waxed
How To Measure A Grille
Overall Size:
Measure the size of the air duct/drywall opening. Do not measure the overall size of the register itself, only measure the “hole” in the wall/duct. Every grille has a front end frame, that will overlap at wall joint.
Total outer size of this grille is; listed size +1.75″.
Width vs Height
The first number in a grille size, represents the width, the second number represents the height. Example: If your hole is 20″ wide by 14″ tall, order a 20×14. If your hole is 14″ wide by 20″ tall, order a 14×20.
Conclusion
By our suggestions above, we hope that you can found 18 inch heating air duct deflectors for you.Please don’t forget to share your experience by comment in this post. Thank you!
