homekitchenart 
Nowadays, there are so many products of 3m double sided sheet in the market and you are wondering to choose a best one. You have searched for 3m double sided sheet in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings 3m double sided sheet which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
19,802 Reviews Scanned
Gizmo Dorks 3M 468MP Adhesive Transfer Tape Sheets 12" x 12" (5-Pack)
- Standard for applying PEI sheets or other print surfaces on to 3D printing build plates. Also industry standard for graphic attachment and general industrial joining applications.
- High performance acrylic adhesive performs well after exposure to humidity and hot/cold cycles. Heat resistance of up to 400 F. Great for 3D printing applications, since 3D printer heated bed temps remain within that range.
- Excellent shear strength to resist slippage and edge lifting. This is important when having a level and sturdy bond is required.
- Cut to size for easy application with no mess. Peel off the polycoated kraft paper liner when ready to use, and apply to clean surface.
- Double sided adhesive tape is great for adhering, bonding, mouting, holding, and attaching PEI to print beds.
The 3M 468MP sheet has a high performance 3M acrylic adhesive that bonds extremely well to plastic and metal. It performs well under hot/cold cycles and temperatures up to 400 F. The outstanding shear strength of the adhesive provides resistance against slippage and edge lighting. Commonly used to bond nameplates, signs, graphic overlays, etc. The 3M 468MP transfer tape is ideal for bonding PEI sheets onto 3D print beds. Well within most 3D printer’s print bed temperature range, the 3M 468MP Adhesive Tape is the perfect solution for attaching a level and flat PEI sheet. Each sheet has a protective liner on each side of the adhesive. Simply remove the polycoated kraft paper to expose the double sided adhesive.
Gizmo Dorks 3M 468MP Adhesive Transfer Tape Sheets 10" x 10" (5-Pack)
- Standard for applying PEI sheets or other print surfaces on to 3D printing build plates. Also industry standard for graphic attachment and general industrial joining applications.
- High performance acrylic adhesive performs well after exposure to humidity and hot/cold cycles. Heat resistance of up to 400 F. Great for 3D printing applications, since 3D printer heated bed temps remain within that range.
- Excellent shear strength to resist slippage and edge lifting. This is important when having a level and sturdy bond is required.
- Cut to size for easy application with no mess. Peel off the polycoated kraft paper liner when ready to use, and apply to clean surface.
- Double sided adhesive tape is great for adhering, bonding, mouting, holding, and attaching PEI to print beds.
The 3M 468MP sheet has a high performance 3M acrylic adhesive that bonds extremely well to plastic and metal. It performs well under hot/cold cycles and temperatures up to 400 F. The outstanding shear strength of the adhesive provides resistance against slippage and edge lighting. Commonly used to bond nameplates, signs, graphic overlays, etc. The 3M 468MP transfer tape is ideal for bonding PEI sheets onto 3D print beds. Well within most 3D printer’s print bed temperature range, the 3M 468MP Adhesive Tape is the perfect solution for attaching a level and flat PEI sheet. Each sheet has a protective liner on each side of the adhesive. Simply remove the polycoated kraft paper to expose the double sided adhesive.
Gizmo Dorks 3M 468MP Adhesive Transfer Tape Sheets 8" x 8" (5-Pack)
- Standard for applying PEI sheets or other print surfaces on to 3D printing build plates. Also industry standard for graphic attachment and general industrial joining applications.
- High performance acrylic adhesive performs well after exposure to humidity and hot/cold cycles. Heat resistance of up to 400 F. Great for 3D printing applications, since 3D printer heated bed temps remain within that range.
- Excellent shear strength to resist slippage and edge lifting. This is important when having a level and sturdy bond is required.
- Cut to size for easy application with no mess. Peel off the polycoated kraft paper liner when ready to use, and apply to clean surface.
- Double sided adhesive tape is great for adhering, bonding, mouting, holding, and attaching PEI to print beds.
The 3M 468MP sheet has a high performance 3M acrylic adhesive that bonds extremely well to plastic and metal. It performs well under hot/cold cycles and temperatures up to 400 F. The outstanding shear strength of the adhesive provides resistance against slippage and edge lighting. Commonly used to bond nameplates, signs, graphic overlays, etc. The 3M 468MP transfer tape is ideal for bonding PEI sheets onto 3D print beds. Well within most 3D printer’s print bed temperature range, the 3M 468MP Adhesive Tape is the perfect solution for attaching a level and flat PEI sheet. Each sheet has a protective liner on each side of the adhesive. Simply remove the polycoated kraft paper to expose the double sided adhesive.
3M Genuine 1/2" (12mm) x 15 Ft VHB Double Sided Foam Adhesive Tape 5952 Grey Automotive Mounting Very High Bond Strong Industrial Grade (1/2" (w) x 15 ft)
- 1/2″ (12mm) width x 15 Ft (5 yards) (Genuine 3M VHB 5952 Double Sides Foam (Dark Grey) Adhesive Tape
- 3M VHBTapes all-acrylic construction provides strength and durability in highly demanding applications
- Dark gray, closed-cell acrylic foam carrier. Conformable. Good Adhesion to many painted surfaces,including powder coat
- Adhesive type: Modified Acrylic Tape thickness w/o liner: 45 mils (1.1mm) Relative adhesion: HSE: High, LSE Med Solvent Resistance: High
- 50% strength of bond in 20 minutes, 90% strength of bond in 24 hours and 100% strength of bond after 72 hours
For maximum bond strength, the surface should be thoroughly cleaned and dried. Typical cleaning solvents are heptane or isopropyl alcohol. Carefully read and follow manufacturer’s precautions and directions for use when using cleaning solvents. This adhesive tape is NOT like normal adhesive tape that you can feel the adhesiveness when you use it. This tape need time and pressure to get into its adhesiveness. You have to press hard to one surface, than take out the red protective plastic and press the other surface part onto the Dark Grey part of the tape and leave that for 3 days to have the full bond strength. This is 3M product and we just sell whatever they have made. Customers are advise to search for more usage details from 3M web site.
Pack of 10 Sheets Size 12" x 12", 3M 8153LE (300LSE) Super-Strong Double-Sided Adhesive Sheet/Adhesive Transfer Tape. [8153-12×12-eco-10pk]
- Double-sided adhesive tapes or sheets using 3M’s 300LSE adhesive are the strongest and most versatile ones commercially available. For that reason 3M 300LSE-based adhesives are extensively used in the auto and electronics industry. In recent years, 3M’s 300LSE has become the preferred adhesive for attaching digitizers (i.e., the glass covers) to mobile phones and tablets.
- This listing here is for one sheet of 3M 8153LE double-sided adhesive of size 12″ x 12″. 3M offers 8153LE only in the industrial size of 24″ x 36″. We cut those sheets to smaller sizes and make them available to technically skilled users in smaller quantities and sizes. NON-TECHNICAL USERS BEWARE: THIS MATERIAL IS DIFFICULT TO WORK WITH (see detailed Warning in the Product Description, below).
- DIMENSIONS: Nominal: 12″ x 12″ (305 mm x 305 mm). Tolerance: ±1/8″ (3 mm). Included with each order is one page chock-full of detailed instructions and usage tips, all especially useful for first-time users of this product. While you may find sheets of 8153LE from other vendors, our detailed instructions offer valuable tips and tricks that will prevent you from ruining sheets.
- We also offer large sheets of 3M 8153LE in their original, uncut size of 24″x36″ as manufactured by 3M Company. Search Amazon for “3M8153-24×36” to see these listings.
- WARNING: This economy-priced sheet was cut out of a larger sheet by knife without subsequently trimming the edges with a laser cutter. The untrimmed edges of this sheet may stick together, as explained in the detailed Product Description below.
Product description provided in parent
One roll 12 inches Wide x 60 Yards Long of 3M 9472LE 300LSE Super-Strong Adhesive Transfer Tape. [9472-roll-12]
3m VHB 4" X8" Double Sided Foam Adhesive Sheet Tape 5952 Automotive Mounting Industrial Grade Very High Bond 5952 (5 Sheet 4" x 8")
- 4″ x 8″ (Genuine 3M VHB 5952 Double Sides Foam (Dark Grey) Adhesive Tape
- 3M VHBTapes all-acrylic construction provides strength and durability in highly demanding applications
- Dark gray, closed-cell acrylic foam carrier. Conformable. Good Adhesion to many painted surfaces,including powder coat
- Adhesive type: Modified Acrylic Tape thickness w/o liner: 45 mils (1.1mm) Relative adhesion: HSE: High, LSE Med Solvent Resistance: High
- 50% strength of bond in 20 minutes, 90% strength of bond in 24 hours and 100% strength of bond after 72 hours
For maximum bond strength, the surface should be thoroughly cleaned and dried. Typical cleaning solvents are heptane or isopropyl alcohol.Carefully read and follow manufacturer’s precautions and directions for use when using cleaning solvents.
3m 300lse 4" X8" Heavty Duty Double Sided Sticky Adhesive Sheet Tape High Bond Transfer Tape Ideal for Attaching Digitizers to Phones and Tablets (5 sheets 4"x8")
- 4″ x8″ (100mm x 200mm) Genuine 3M 300LSE Double Sides Adhesive Sheet Thickness 2 mil
- 3M™ 300LSE is hi-strength acrylic adhesive that provides very high bond strength to most surfaces.
- Excellent bond to low surface energy plastics such as, polypropylene and powder coatings.
- Excellent adhesion to lightly oiled surfaces typical of machine parts. Thickness 2 mil
- Extremely smooth adhesive for excellent graphics appearance, cell phone repair
For maximum bond strength, the surface should be thoroughly cleaned and dried. Typical cleaning solvents are heptane or isopropyl alcohol. Carefully read and follow manufacturer’s precautions and directions for use when using cleaning solvents. 3M™ Adhesive Transfer Tapes with 3M™ Low Surface Energy Acrylic Adhesive 300LSE provides high bond strength to most surfaces, including many low surface energy plastics such as polypropylene and powder coated paints. The acrylic adhesive also provides excellent adhesion to surfaces contaminated lightly with oil typically used with machine parts
3M 4611/DGRAY0755 Scotch 4611 VHB Tape: 3/4" x 15 ft, Dark Gray
- 3M 4611 VHB Tape is a double-sided tape typically used on metal substrates, and has the added feature of high-temperature resistance, making it suitable for bonding prior to high-temperature paint processing.
- 3M 4611 is coated with a general-purpose adhesive on both sides of the firm foam. Please note, as stated in 3M’s data sheet for this product, it ships on a plain red film release liner (not a printed 3M liner like other 3M VHB tapes).
- Virtually invisible, 3M VHB Tape provides the convenience and simplicity of a tape fastener and is ideal for use in many interior and exterior structural bonding applications. In many situations, VHB tape can replace rivets, spot welds, liquid adhesives, and other permanent fasteners.
- These VHB tapes are made with an acrylic foam which is viscoelastic in nature. This gives the foam energy absorbing and stress relaxing properties which provides these tapes with their unique characteristics. The acrylic chemistry provides outstanding durability performance and the tapes have excellent durability, solvent and moisture resistance.
- Carrier/Backing: closed-cell acrylic foam (firm). Adhesive: general-purpose acrylic. Release Liner: PE film (solid red / not-printed). Thickness: 50 mils (carrier, adhesive, liner) 45 mils (carrier, adhesive) 45 mils (carrier) 5 mils (liner). Adhesion: 288 ounces per inch (to stainless steel test panel). Tensile Strength: 90 pounds per inch (longitudinal). Service/Operating Temperature: up to 300F. Application Temperature: 50F to 100F. Core: 3-inch diameter.
3M 4611 VHB Tape is a double-sided tape typically used on metal substrates, and has the added feature of high-temperature resistance, making it suitable for bonding prior to high-temperature paint processing. 3M 4611 is coated with a general-purpose adhesive on both sides of the firm foam. Please note, as stated in 3M’s data sheet for this product, it ships on a plain red film release liner (not a printed 3M liner like other 3M VHB tapes).
Virtually invisible, 3M VHB Tape provides the convenience and simplicity of a tape fastener and is ideal for use in many interior and exterior structural bonding applications. In many situations, VHB tape can replace rivets, spot welds, liquid adhesives and other permanent fasteners.
These VHB tapes are made with an acrylic foam which is viscoelastic in nature. This gives the foam energy absorbing and stress relaxing properties which provides these tapes with their unique characteristics. The acrylic chemistry provides outstanding durability performance and the tapes have excellent durability, solvent and moisture resistance. Made in the U.S.
NOTES: As with any adhesive tape product it is always the user’s responsibility to determine that the product is suitable for their intended use; e.g. if you want to remove a product cleanly from a specific type of substrate please test on an inconspicuous area first.
Technical Information– Core: 3 inch diameter
– Backing/Carrier: closed-cell acrylic foam (firm)
– Adhesive: general-purpose acrylic
– Release Liner: PE film (solid red / not-printed)
– Thickness: 50 mils (carrier, adhesive, liner) 45 mils (carrier, adhesive) 45 mils (carrier)
– Adhesion: 288 ounces per inch (to stainless steel test panel)
– Tensile Strength: 90 pounds per inch (longitudinal)
– Application Temperature: 50F to 100F
– Service/Operating Temperature: up to 300F
3M Scotch 5952 VHB Tape: 1 in. x 15 ft. (Black)
- Adhesion: 320 ounces per inch (to stainless steel test panel)
- Tensile Strength: 90 pounds per inch (longitudinal)
- Thickness: 50 mils (carrier, adhesive, liner) 45 mils (carrier, adhesive) 5 mils (liner)
- Dynamic Overlap Shear: 80 pounds per square inch
- Carrier/Backing: closed cell acrylic foam
3M 5952 Heavy Duty Mounting VHB Tape is black, double-coated VHB adhesive tape with an acrylic foam core. A modified acrylic adhesive is on both sides of very conformable foam which provides adhesion to the broadest range of substrates/surfaces, including most powder coated paints. Comes on a red film release liner.
3M VHB Tape provides the convenience and simplicity of a tape fastener and are ideal for use in many interior and exterior bonding applications. In many situations, they can replace rivets, spot welds, liquid adhesives and other permanent fasteners. Recommended to use 4 square inches of 5952 VHB tape for every 1 pound of load; although rough surfaces may require additional tape. These VHB tapes are made with acrylic foam which is viscoelastic in nature. This gives the foam energy absorbing and stress relaxing properties which provides these tapes with their unique characteristics. The acrylic chemistry provides outstanding durability performance and the tapes have excellent durability and excellent solvent and moisture resistance. See http://solutions.3m.com/wps/portal/3M/en_US/Adhesives/Tapes/Brands/3M-VHB-Tape/ for videos showcasing the properties of VHB tape. Made in the U.S.
NOTES: As with any adhesive tape product it is always the user’s responsibility to determine that the product is suitable for their intended use; e.g. if you want to remove a product cleanly from a specific type of substrate please test on an inconspicuous area first.
Technical Information• Core: 3 inch diameter
• Backing/Carrier: closed cell acrylic foam
• Adhesive: modified acrylic
• Release Liner: red PE film
• Thickness: 50 mils (carrier, adhesive, liner) 45 mils (carrier, adhesive) 5 mils (liner)
• Adhesion: 320 ounces per inch (to stainless steel test panel)
• Tensile Strength: 90 pounds per inch (longitudinal)
• Application Temperature: 50F to 100F
•
Our Promise to Readers
We keep receiving tons of questions of readers who are going to buy 3m double sided sheet, eg:
- What are Top 10 3m double sided sheet for 2020, for 2019, for 2018 or even 2017 (old models)?
- What is Top 10 3m double sided sheet to buy?
- What are Top Rated 3m double sided sheet to buy on the market?
- or even What is Top 10 affordable (best budget, best cheap or even best expensive!!!) 3m double sided sheet?…
- All of these above questions make you crazy whenever coming up with them. We know your feelings because we used to be in this weird situation when searching for 3m double sided sheet.
- Before deciding to buy any 3m double sided sheet, make sure you research and read carefully the buying guide somewhere else from trusted sources. We will not repeat it here to save your time.
- You will know how you should choose 3m double sided sheet and What you should consider when buying the 3m double sided sheet and Where to Buy or Purchase the 3m double sided sheet. Just consider our rankings above as a suggestion. The final choice is yours.
- That’s why we use Big Data and AI to solve the issue. We use our own invented, special algorithms to generate lists of Top 10 brands and give them our own Scores to rank them from 1st to 10th.
- You could see the top 10 3m double sided sheet of 2020 above. The lists of best products are updated regularly, so you can be sure that the information provided is up-to-date.
- You may read more about us to know what we have achieved so far. Don’t hesitate to contact us if something’s wrong or mislead information about 3m double sided sheet.
Conclusion
By our suggestions above, we hope that you can found 3m double sided sheet for you.Please don’t forget to share your experience by comment in this post. Thank you!
