Best 3M Products Lapping Film

Genuine 3M 261X Aluminum Oxide 9″ x 13″ lapping film. Each bundle includes 4 sheets of 9″ x 13″ lapping film. You will receive one sheet each of the following grit sizes ( 0.3μm, 1μm, 3μm, and 9μm).

3M (TM) manufacturers lapping film using a wide range of abrasive materials utilizing numerous abrasives, backing materials and bonding agents. These precision microfinishing lapping sheets were developed for the electronics industry but can be used to flat lap or polish just about anything. This lapping film contains carefully graded aluminum oxide particles that are electrostatically coated onto a high-strength, tear-resistant polyester film backing. This fast cutting, water resistant abrasive provides a precise, consistent, close tolerance cut rate throughout the life of the product. Sheets are available in a wide range of precise micron grades to meet any sharpening or polishing need. They can be used to put a wicked sharp edge on wood chisels, plane irons, carving tools or knives. Can also be used to put a fine polish on jewelry or gemstones. These sheets are Non-PSA (Pressure Sensitive Adhesive) backed. They have a 3 mil high-strength polyester film backing is waterproof and less likely to tear than traditional wet or dry sandpaper. They are available in the following grades/grits: 0.05 micron (off-white) or 500,000 grit, 0.3 micron (white) or 60,000 grit, 1 micron (light green) or 14,000 grit, 3 micron (pink) or 8,000 grit, 5 micron (brown) or 4500 grit, 9 micron (light blue) or 1800 grit, 12 micron (yellow) or 1200 grit, 30 micron (green) or 600 grit, 40 micron (blue) or 300 and 60 micron (ivory) or 250 grit. These sheets are not marked so using the above grit/color key will be the only accurate way to identify.

This lapping film is made in the USA by 3M (TM). These microfinishing lapping sheets were developed for industrial applications and can be used to flat lap or polish just about anything. This lapping film contains carefully graded aluminum oxide particles that are electrostatically coated onto a high strength polyester film backing. This fast cutting, water resistant abrasive provides precise, consistent, close tolerance finishes, and are available in a wide range of precise micron grades to meet any sharpening or polishing need. They can be affixed to a hard flat surface (usually 1/4 inch glass) and used to get a scary sharp edge on wood chisels or plane irons. They can be wrapped around contoured sticks and used to sharpen carving tools. They can put a wicked sharp edge on all kinds of knives. They can also be used to put a fine polish on jewelry or gem stones. These are PSA and have pressure sensitive backing. They have a 3 mil high-strength polyester film backing which is less likely to tear than traditional wet or dry sandpaper. The sheets are not marked so using their color is the only accurate way to identify them. These Aluminum Oxide (AO) sheets come in the following grades: 1) 0.3 micron (white) or 60.000 grit 2) 1 micron (light green) or 14,000 grit 3) 3 micron (pink) or 8,000 grit 4) 9 micron (light blue) or 1800 grit 5) 12 micron (yellow) or 1200 grit 6) 30 micron (green) or 600 grit and 7) 40 micron (blue) or 300 grit. The sheets are not marked so using their color is the only accurate way to identify. In the finer grits, it can be difficult to differentiate the abrasive side from the backing. The abrasive side will always have a matte finish, where the film backing side will be glossy.

These 3M (TM) diamond microfinishing lapping sheets were developed for the electronic industry but are the perfect solution to flat lapping, polishing or sharpening just about anything. These diamond sheets contain carefully graded monocrystalline diamond particles electrostatically coated onto a high strength polyester film backing. This super-fast cutting, long-lasting, water resistant abrasive provides precise, consistent, close tolerance finishes, but really excel when used on harder materials such as hardened steel, carbide or gemstones. This diamond film is the most aggressive polishing or sharpening media available and will cut up to twice as fast as aluminum oxide (AO) or silicon carbide (SC) films. The diamond particles have superior fracture resistance and will outlast other lapping and sharpening media by up to two times. They are available in a wide range of precise micron grades from .1 micron (200,000 grit) to 125 micron (120 grit) to meet any sharpening or polishing need. They can be affixed to a hard, flat surface (usually thick float glass) and used to get a scary sharp edge on wood chisels or plane irons. They can be wrapped around contoured sticks and used to sharpen carving tools. They can put a wicked sharp edge on all kinds of knives. They can be used to sharpen carbide cutting tools. They can also be used to put a fine polish on jewelry or gemstones. These sheets are PSA (Pressure Sensitive Adhesive) backed. Grades from .1 to 30 micron have a 3 mil backing and grades 45 to 125 have a much thicker 5 mil backing. The high-strength polyester film backing is less likely to tear than traditional wet or dry sandpaper. When affixing to a substrate make sure to fully clean the surface as any debris will create a bump and expose the film to being sliced. They can be used dry but using wet with water or light oil as a lubricant to carry away the swarf is preferred as this minimizes loading and prolongs the life of the abrasive.

3M Lapping Film, 9″ x 13″, Multiple Grit Bundle Package, One Each Aluminum Oxide 0.3μm, 1μm, 3μm, and 9μm and One Each Silicon Carbide 5um and 15um.

3Mmanufacturers lapping film using a wide range of abrasive materials utilizing numerous abrasives, backing materials and bonding agents. These precision microfinishing lapping sheets were developed for the electronics industry but can be used to flat lap or polish just about anything. This lapping film contains carefully graded aluminum oxide particles that are electrostatically coated onto a high-strength, tear-resistant polyester film backing. This fast cutting, water resistant abrasive provides a precise, consistent, close tolerance cut rate throughout the life of the product. Sheets are available in a wide range of precise micron grades to meet any sharpening or polishing need. They can be used to put a wicked sharp edge on wood chisels, plane irons, carving tools or knives. Can also be used to put a fine polish on jewelry or gemstones. These sheets are Non-PSA (Pressure Sensitive Adhesive) backed. They have a 3 mil high-strength polyester film backing is waterproof and less likely to tear than traditional wet or dry sandpaper. They are available in the following grades/grits: 0.05 micron (off-white) or 500,000 grit, 0.3 micron (white) or 60,000 grit, 1 micron (light green) or 14,000 grit, 3 micron (pink) or 8,000 grit, 5 micron (brown) or 4500 grit, 9 micron (light blue) or 1800 grit, 12 micron (yellow) or 1200 grit, 30 micron (green) or 600 grit, 40 micron (blue) or 300 and 60 micron (ivory) or 250 grit. These sheets are not marked so using the above grit/color key will be the only accurate way to identify. In the finer Non-PSA grits, it can be difficult to differentiate the abrasive side from the backing. The abrasive side will always have a matte finish, where the film backing side will be glossy.

3M (TM) Microfinishing PSA Film Sheets are designed to produce the finest finish possible, in the least amount of time and can be easily cut to fit any application. They feature micron-graded silicon carbide (SC) abrasive material bonded to a durable polyester film backing to produce a fast cut-rate and uniform finish. 3M (TM) manufacturers a wide range of abrasive materials utilizing numerous abrasives, backing materials and bonding agents. These precision Pressure Sensitive Adhesive (PSA) backed microfinishing lapping sheets were developed for the electronics industry but can be used to flat lap or polish just about anything. This lapping film contains precision, micron-graded silicon carbide (SC) abrasive. Silicon carbide (SC) offers a fast cut rate and a superior, uniform finish on many substrates and is ideal for use on plastics, wood, paint, e-coat, metal and composites. The thin 3 mil film backing flexes to help achieve a consistent finish over contours The backing also offers greater tear-resistance than comparable paper products, making it ideal for high-production environments. The Pressure Sensitive Adhesive (PSA) provides flat, easy attachment, holds the sheet securely in place during use, and removes cleanly. This fast cutting, water resistant abrasive provides a precise, consistent, close tolerance finish, and is available in a wide range of precise micron grades to meet any sharpening or polishing need. These sheets can be affixed to a hard, flat surface (usually float glass) and used to sharpen wood chisels or plane irons. They can be wrapped around shaped sticks and used to sharpen carving tools. They can put a wicked sharp edge on all kinds of knives. They can also be used to put a fine polish on jewelry or gemstones. This pack contains the following micron/grits: 5 micron (grey) or 4000 grit, 9 micron (grey) or 2000 grit, 15 micron (grey) or 1200 grit 30 micron (grey) or 600 grit or 60 micron (grey) or 300 grit.

Our Promise to Readers

We keep receiving tons of questions of readers who are going to buy 3m products lapping film, eg:

• What are Top 10 3m products lapping film for 2020, for 2019, for 2018 or even 2017 (old models)?
• What is Top 10 3m products lapping film to buy?
• What are Top Rated 3m products lapping film to buy on the market?
• or even What is Top 10 affordable (best budget, best cheap or even best expensive!!!) 3m products lapping film?…
• All of these above questions make you crazy whenever coming up with them. We know your feelings because we used to be in this weird situation when searching for 3m products lapping film.
• Before deciding to buy any 3m products lapping film, make sure you research and read carefully the buying guide somewhere else from trusted sources. We will not repeat it here to save your time.
• You will know how you should choose 3m products lapping film and What you should consider when buying the 3m products lapping film and Where to Buy or Purchase the 3m products lapping film. Just consider our rankings above as a suggestion. The final choice is yours.
• That’s why we use Big Data and AI to solve the issue. We use our own invented, special algorithms to generate lists of Top 10 brands and give them our own Scores to rank them from 1st to 10th.
• You could see the top 10 3m products lapping film of 2020 above. The lists of best products are updated regularly, so you can be sure that the information provided is up-to-date.
• You may read more about us to know what we have achieved so far. Don’t hesitate to contact us if something’s wrong or mislead information about 3m products lapping film.

Conclusion

By our suggestions above, we hope that you can found 3m products lapping film for you.Please don’t forget to share your experience by comment in this post. Thank you!