homekitchenart 
Nowadays, there are so many products of 3m vhb tape 5952 1/8 in the market and you are wondering to choose a best one. You have searched for 3m vhb tape 5952 1/8 in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings 3m vhb tape 5952 1/8 which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
15,360 Reviews Scanned
3M VHB Heavy Duty Mounting Tape 5952, 0.125" width x 5yd length (1 Roll)
- Eliminates drilling, grinding, refinishing, screwing, welding, and clean-up
- Firm foam construction provides excellent tape strength
- Double sided, pressure sensitive adhesive bonds on contact with no drying time
- Long term durability, with no unsightly rivet heads or weld marks
- Continuous bond distributes stress over entire length of the joined surfaces
3M(TM) VHB(TM) Heavy Duty Mounting Tape 5952 is a black, 0.045 inch (1.1 millimeter) modified acrylic adhesive with a very conformable, foam core. This tape has been converted from 3M VHB Tape 5952.
3M Scotch 5952 VHB Tape: 1 in. x 15 ft. (Black)
- Adhesion: 320 ounces per inch (to stainless steel test panel)
- Tensile Strength: 90 pounds per inch (longitudinal)
- Thickness: 50 mils (carrier, adhesive, liner) 45 mils (carrier, adhesive) 5 mils (liner)
- Dynamic Overlap Shear: 80 pounds per square inch
- Carrier/Backing: closed cell acrylic foam
3M 5952 Heavy Duty Mounting VHB Tape is black, double-coated VHB adhesive tape with an acrylic foam core. A modified acrylic adhesive is on both sides of very conformable foam which provides adhesion to the broadest range of substrates/surfaces, including most powder coated paints. Comes on a red film release liner.
3M VHB Tape provides the convenience and simplicity of a tape fastener and are ideal for use in many interior and exterior bonding applications. In many situations, they can replace rivets, spot welds, liquid adhesives and other permanent fasteners. Recommended to use 4 square inches of 5952 VHB tape for every 1 pound of load; although rough surfaces may require additional tape. These VHB tapes are made with acrylic foam which is viscoelastic in nature. This gives the foam energy absorbing and stress relaxing properties which provides these tapes with their unique characteristics. The acrylic chemistry provides outstanding durability performance and the tapes have excellent durability and excellent solvent and moisture resistance. See http://solutions.3m.com/wps/portal/3M/en_US/Adhesives/Tapes/Brands/3M-VHB-Tape/ for videos showcasing the properties of VHB tape. Made in the U.S.
NOTES: As with any adhesive tape product it is always the user’s responsibility to determine that the product is suitable for their intended use; e.g. if you want to remove a product cleanly from a specific type of substrate please test on an inconspicuous area first.
Technical Information• Core: 3 inch diameter
• Backing/Carrier: closed cell acrylic foam
• Adhesive: modified acrylic
• Release Liner: red PE film
• Thickness: 50 mils (carrier, adhesive, liner) 45 mils (carrier, adhesive) 5 mils (liner)
• Adhesion: 320 ounces per inch (to stainless steel test panel)
• Tensile Strength: 90 pounds per inch (longitudinal)
• Application Temperature: 50F to 100F
•
3M VHB Tape 4646, 0.125 in width x 5 yd length, 1 roll
3M VHB Heavy Duty Mounting Tape 5952, 0.5" width x 5yd length (1 Roll) (4 Pack (1 Roll))
- Eliminates drilling, grinding, refinishing, screwing, welding, and clean-up
- Firm foam construction provides excellent tape strength
- Double sided, pressure sensitive adhesive bonds on contact with no drying time
- Long term durability, with no unsightly rivet heads or weld marks
- Continuous bond distributes stress over entire length of the joined surfaces
3M(TM) VHB(TM) Heavy Duty Mounting Tape 5952 is a black, 0.045 inch (1.1 millimeter) modified acrylic adhesive with a very conformable, foam core. This tape has been converted from 3M VHB Tape 5952.
3M Scotch 5952 VHB Tape: 1/2 in. x 15 ft. (Black)
- Adhesion: 320 ounces per inch (to stainless steel test panel)
- Tensile Strength: 90 pounds per inch (longitudinal)
- Thickness: 50 mils (carrier, adhesive, liner) 45 mils (carrier, adhesive) 5 mils (liner)
- Dynamic Overlap Shear: 80 pounds per square inch
- Carrier/Backing: closed cell acrylic foam
3M 5952 Heavy Duty Mounting VHB Tape is black, double-coated VHB adhesive tape with an acrylic foam core. A modified acrylic adhesive is on both sides of very conformable foam which provides adhesion to the broadest range of substrates/surfaces, including most powder coated paints. Comes on a red film release liner.
3M VHB Tape provides the convenience and simplicity of a tape fastener and are ideal for use in many interior and exterior bonding applications. In many situations, they can replace rivets, spot welds, liquid adhesives and other permanent fasteners. Recommended to use 4 square inches of 5952 VHB tape for every 1 pound of load; although rough surfaces may require additional tape. These VHB tapes are made with acrylic foam which is viscoelastic in nature. This gives the foam energy absorbing and stress relaxing properties which provides these tapes with their unique characteristics. The acrylic chemistry provides outstanding durability performance and the tapes have excellent durability and excellent solvent and moisture resistance. See http://solutions.3m.com/wps/portal/3M/en_US/Adhesives/Tapes/Brands/3M-VHB-Tape/ for videos showcasing the properties of VHB tape. Made in the U.S.
NOTES: As with any adhesive tape product it is always the user’s responsibility to determine that the product is suitable for their intended use; e.g. if you want to remove a product cleanly from a specific type of substrate please test on an inconspicuous area first.
Technical Information– Core: 3 inch diameter
– Backing/Carrier: closed cell acrylic foam
– Adhesive: modified acrylic
– Release Liner: red PE film
– Thickness: 50 mils (carrier, adhesive, liner) 45 mils (carrier, adhesive) 5 mils (liner)
– Adhesion: 320 ounces per inch (to stainless steel test panel)
– Tensile Strength: 90 pounds per inch (longitudinal)
– Application Temperature: 50F to 100F
– Service/Operating Temperature: up to 250F
3M VHB Heavy Duty Mounting Tape 4910 Clear, 3/4 in x 15 yd 40.0 mil (Pack of 1)
- Eliminates drilling, grinding, refinishing, screwing, welding, and clean-up
- Clear, acrylic construction is ideal for joining transparent material
- Pressure sensitive adhesive bonds on contact with no drying time
- Virtually invisible fastening helps keep surfaces smooth, with no unsightly rivet heads or weld marks
- Continuous bond distributes stress over entire length of the joined surfaces
3M(TM) VHB(TM) Heavy Duty Mounting Tape 4910 is a clear double-sided, pressure-sensitive, acrylic tape with PE film liner. 40 mil thick.
3m 1.5" (38mm, 1-1/2")) X 9 Ft VHB Double Sided Foam Adhesive Tape 5952 Grey Automotive Mounting Very High Bond Strong Industrial Grade
- 1.5 “(38mm) width x 9 Ft( 3 yards) (Genuine 3M VHB 5952 Double Sides Foam (Dark Grey) Adhesive Tape
- 3M VHBTapes all-acrylic construction provides strength and durability in highly demanding applications
- Dark gray, closed-cell acrylic foam carrier. Conformable. Good Adhesion to many painted surfaces,including powder coat
- Adhesive type: Modified Acrylic Tape thickness w/o liner: 45 mils (1.1mm) Relative adhesion: HSE: High, LSE Med Solvent Resistance: High
- 50% strength of bond in 20 minutes, 90% strength of bond in 24 hours and 100% strength of bond after 72 hours
For maximum bond strength, the surface should be thoroughly cleaned and dried. Typical cleaning solvents are heptane or isopropyl alcohol. Carefully read and follow manufacturer’s precautions and directions for use when using cleaning solvents.
Genuine 3M 1/2" (12mm) x 108 Ft (36 Yards) VHB Double Sided Foam Adhesive Tape 5952 Grey Automotive Mounting Very High Bond Strong Industrial Grade (1/2" (w) x 108 ft)
3M VHB Tape 4611, 0.25 in width x 36 yd length, 1 roll
- Applications: the acrylic adhesive allows instant bonding. This double-sided tape is used in applications like bonding of finishing trims and moldings in the automobile, heavy-duty vehicle, and equipment industries
- Temperature Resistant: the permanent bonding adhesive has a high temperature resistance. Being resistant to UV light, moisture, solvents, and harsh chemicals, the adhesive tape can bond and seal even in extreme environments
- Fast and easy-to-use: this two-sided tape guarantees a smooth surface appearance and creates a high strength bond between substrates without the need of rivets, spot welds, screws, and liquid adhesives
- Compatibility: this firm foam tape perfectly bonds to glass and high surface energy bare metal surfaces, such as aluminum, galvanized steel, and stainless steel. The acrylic tape offers design flexibility due to its viscoelastic properties
- Product Specifications: this high-bonding adhesive tape is 0.045 in. thick and measures 0.25 in. (width) x 108 ft. (length). Designed in dark gray, the bonding tape is layered with general-purpose adhesive on both the sides
A high-bonding adhesive, 3M VHB 4611 Tape is specially designed for maintaining a flexible and permanent bonding between different substrates. The two-sided tape is coated with multipurpose adhesive on both sides and made resistant to hot, cold, and cycling temperatures. With an exceptional strength, the double-sided tape provides a strong adhesion, eliminating the need of drilling, riveting, or other liquid adhesives. The bonding tape typically adheres to glass and high surface energy bare metal surfaces, such as aluminum, galvanized steel, and stainless steel. The foam-based acrylic adhesive ensures hassle-free assembly, becoming suitable for use in bonding of the finishing trims and moldings in automobile, heavy-duty vehicle, and equipment industries.
3M VHB Tape 4991, 0.125 in Width x 5 yd Length, 1 roll
- Acrylic Tape: this adhesive tape is the perfect replacement of rivets, spot welds, screws, and liquid adhesives thanks to its high strength
- Foam Tape: the double-sided tape has a conformable foam core that provides viscoelasticity and strong surface adhesion
- Durable: resistant to UV light, moisture, solvent, and chemicals, the sealing tape can adhere to a variety of materials — aluminum, stainless steel, galvanized steel, composites, acrylic, polycarbonate, ABS, painted or sealed wood, etc.
- Usage: VHB tape can be reliably used for a variety of purposes, including attaching steel stiffeners to metal panels with textured surface, and for cabinet or sign assembly
- Specifications: the tape roll measures 0.125 in. in width, 15 ft. in length, and is 0.090 in. thick
Maintain a permanent bond between materials with varying surface energies and textures using 3M VHB Tape 4991. The acrylic foam tape has been durably manufactured and is the ideal replacement for rivets, spot welds, screws, and liquid adhesives. Double-sided adhesive tape can be suitably used for bonding a broad variety of substrates like aluminum, stainless steel, galvanized steel, composites, acrylic, polycarbonate, ABS, painted or sealed wood, etc. Use the acrylic adhesive to attach steel stiffeners to metal panels for doors and for cabinet or sign assembly.
Our Promise to Readers
We keep receiving tons of questions of readers who are going to buy 3m vhb tape 5952 1/8, eg:
- What are Top 10 3m vhb tape 5952 1/8 for 2020, for 2019, for 2018 or even 2017 (old models)?
- What is Top 10 3m vhb tape 5952 1/8 to buy?
- What are Top Rated 3m vhb tape 5952 1/8 to buy on the market?
- or even What is Top 10 affordable (best budget, best cheap or even best expensive!!!) 3m vhb tape 5952 1/8?…
- All of these above questions make you crazy whenever coming up with them. We know your feelings because we used to be in this weird situation when searching for 3m vhb tape 5952 1/8.
- Before deciding to buy any 3m vhb tape 5952 1/8, make sure you research and read carefully the buying guide somewhere else from trusted sources. We will not repeat it here to save your time.
- You will know how you should choose 3m vhb tape 5952 1/8 and What you should consider when buying the 3m vhb tape 5952 1/8 and Where to Buy or Purchase the 3m vhb tape 5952 1/8. Just consider our rankings above as a suggestion. The final choice is yours.
- That’s why we use Big Data and AI to solve the issue. We use our own invented, special algorithms to generate lists of Top 10 brands and give them our own Scores to rank them from 1st to 10th.
- You could see the top 10 3m vhb tape 5952 1/8 of 2020 above. The lists of best products are updated regularly, so you can be sure that the information provided is up-to-date.
- You may read more about us to know what we have achieved so far. Don’t hesitate to contact us if something’s wrong or mislead information about 3m vhb tape 5952 1/8.
Conclusion
By our suggestions above, we hope that you can found 3m vhb tape 5952 1/8 for you.Please don’t forget to share your experience by comment in this post. Thank you!
