homekitchenart 
Nowadays, there are so many products of raspberry pi cooling hat in the market and you are wondering to choose a best one. You have searched for raspberry pi cooling hat in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings raspberry pi cooling hat which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
UCTRONICS PoE HAT for Raspberry Pi 4 with Case, 802.3at Power Over Ethernet Expansion Board for Pi 4 B Board, with Cooling Fan
- Perfect for Pi 4: This PoE HAT can be used with Raspberry Pi 3 model B+ and Raspberry Pi 4 model B (not included)
- This Acrylic clear case is designed for Pi 4 Board. NOTE: Pi 4 board is not included.
- Higher Output Power: DC 5V (3A Max) / 12V (2A Max) via on-board terminal block
- Total Power Budget: 25W
- Over-temperature Protection: The 25mm×25mm brushless cooling fan will turn automatically when the temperature of the processor is high.
- Well-ventilated Case: Cut-outs for every port of Pi 4 board and PoE hat, easy to access to all ports as well as supplying well-ventilated environment.
- NOTE: PSE (Power Supply Equipment) is needed to supply PoE signal to the Raspberry Pi, such as a PoE switch or injector.
Yahboom Raspberry Pi 4B 3B+ 3B Cooling Fan Hat with Intelligent Temperature Control and Programmable RGB Light, I2C OLED Real-time Display
- I2C OLED screen real-time display raspberry pi temperature, memory, CPU usage, hard disk space, IP address.You can monitor the running status of your raspberry pi at any time.
- By programming, you can adjust the fan speed according to the CPU temperature, so that the raspberry pi can work stably at a safe temperature. ★★★Important Note: Only the RGB lights will be on after the raspberry pi hat is powered on. You must run the program provided by Yaboom before the fan will rotate according to the temperature of the raspberry Pi board. If you do not run the program, your fan will not rotate! ★★★
- Programmable RGB lights, not only can emit lights of various colors, but also can express different temperatures with different colors of lights.
- The raspberry pi cooling hat driver package is already installed and is suitable for all raspberry pi system images, while Yahboom offers all the necessary courses.
- Fully lead to the raspberry pi IO port, doesn’t affect the use of IO interface.★★★Important note: When the fan is at maximum speed and stationary, it is very quiet. When the fan is at middle speed, there will be some noise. If it cannot be received, please order carefully
Raspberry Pi 4 Fan, iUniker Raspberry Pi 4 Heatsink Fan Single Fan Cooling Fan and RAM Copper Heatsink for Raspberry Pi 4, Raspberry Pi 4B, Raspberry Pi 4 Model B
- Lower Cost than Dual Fan, Single Fan Version Heatsink Fan
- It Can Compatible with Many Single Board Computer (Just pay attention to the Size of the Heatsink)
- Efficient drop temp of your Pi by using our heatsink fan.
- Custom 3M heat conductive strip can make sure your Pi works stable when you are overclocking.
- Upgrade bearing of this fan not only can make sure outputing a lot of wind,but also quiet enough.
SPECIFICATION:
– Size:
– Voltage: 5V
– Current: 0.2A
– Power: 1W
– Speed: 7500rpm
– Noise: 29DBA
Package include:
1x Single Cooling Heatsink Fan for CPU with Thermal Tape
3x Heatsinks with Thermal Tape
MakerFocus Raspberry Pi 4B Cooling Fan, Raspberry Pi 4B Heatsink, Raspberry Pi 4B GPIO Expansion Board DC5V 0.2A with LED Compatible with Raspberry Pi 4B/3B+/3B
- [Wide application ran]Compatible with multiple versions of Raspberry Pi, Raspberry pin pins can be used, the board is suitable for Raspberry Pi 4B/3B+/3B/2B+/2B/B. Assembly video tutorial: https://drive.google.com/open?id=1B5HmsHX5xEal2gut5sB8Gn49v543mzKX
- The Expansion board is made of PCB process, it with LED, will bring the dazzling effect. You could see the LED light from heat sink icon after you finished the installation.
- Clear pin mark, GPIO function fully displayed. All GPIO pins are pulled out, So when the Raspberry Pi is being cooled, its development function will not be affected.
- The cooling fan adopts active cooling mode, the heat can be discharged in time. On the other hand, keep the raspberry pi connection to be convenient.
- [Strong after-sales service team] We Have a Strong After-sales Service Team: As long as you have any questions about the product, we will resolve your issue immediately if received your email, your satisfactory purchase experience is our greatest hope. How to email us Plz click “Makerfocus” and click “Ask a question” to email us! Looking forward to your consultation!
Product Description
Product Parameters:
Nominal voltage: DC 5V
Current: 0.2A
Size: 65*56*9mm
Compaitable: Raspberry Pi 4B/3B+/3B/2B+/2B/B
Product Performance:
Compatible with multiple versions of Raspberry Pi; All GPIO pins are pulled out, So when the Raspberry Pi is being cooled, its development function will not be affected.
The cooling fan adopts active cooling mode, the heat can be discharged in time. On the other hand, keep the raspberry pi connection to be convenient.
The Expansion board is made of PCB process, it bring the dazzling effect. You could see the LED light from heat sink icon after you finished the installation.
The fan adopts active heat dissipation mode, which is better than passive heat dissipation
Package Including:
1 * Expansion Board with Fan
4 * Copper column(column double pass M2.5*17mm)
9 * Screw(M2.5*5 countersunk screw)
Miuzei Case for Raspberry Pi 4 with Large Fan and 4 × Aluminum Heat Sinks for Raspberry Pi 4 Model B(Pi 4 Board Not Included)-Black/Blue
- – Miuzei Acrylic Black/Blue Case for protecting the RPi 4. It looks nice, cools effectively and makes sure that won’t block the signal for onboard wireless networking and Bluetooth.
- – Easy access to the USB-C power connector, dual micro HDMI, Audio/Video, USB and Ethernet ports, GPIO port, Camera Cable and access to the micro SD card.
- – Better heat dissipation performance with large 35*35mm fan and four heat-sinks to keep your Pi cooler, especially that mid-plate trapping the air from the fan could be better circulation for heavy CPU loads.
- – The rubber feet on the bottom of the case, elevate the nuts from contacting the surface and provides a stable platform that allows air to circulate on the bottom side of the board.
- – Kit Includes Miuzei Raspberry Pi 4 Black/Blue Case, Cooling Fan(35*35mm), 4 Aluminum Heat Sinks, 4 Rubber Feet, Screwdriver for Case
Miuzei Raspberry Pi 4 black/blue case with large fan, Aluminum Heat Sinksr.
Specifications
Crystal-like appearance
Great looking layered black/blue case you’ll get-Made of Acrylic not metal, the pi case makes sure that won’t block the signal for onboard wireless networking and Bluetooth.
All ports are available
Easy access to the USB-C power connector, dual micro HDMI, Audio/Video, USB and Ethernet ports, GPIO port and access to the micro SD card
Better circulation and heat dissipation performance
The fan is very quiet, even on 5V. The temperature of the CPU could drop around 30 Degrees at 5V with 35mm big fan with heat sinks.
Especially that Mid plate trapping the air from the fan could be better circulation and keep your Pi cooler if you want to overclock.
Rubber Nub-Feet
The rubber feet on the bottom of the case, elevate the nuts from contacting the surface and provides a stable platform that allows air to circulate on the bottom side of the board.
Kit Includes
– Miuzei Raspberry Pi 4 Black/Blue case
– 35mm*35mm Cooling Fan
– Set of 4 Aluminum Heat Sinks
– Set of 4 Rubber Feet for Case
– Screwdriver
-Paper Installation Instruction
Related Item
The clear/black case kit:
http://www.amazon.com/dp/B07TTN1M7G
http://www.amazon.com/dp/B07VDHTVGP
Note
Please follow the paper instruction or Youtube video to make sure you installed it right.
Please peel off the protective films on the top and bottom layers before you set it up.
The case ONLY Compatible with Raspberry Pi 4.
iUniker Raspberry Pi 4 Case, Raspberry Pi 4 Fan ABS Case with Cooling Fan, Raspberry Pi 4 Heatsink, Simple Removable Top Cover for Pi 4 Model B/ 4B (Black with Large Fan)
- Unique Removable Top Cover Design, you can get in touch with the GPIO or Camera Connector Very Simple
- With 40mm Quiet Cooling Fan, it can drop the temps for your Pi
- Include Raspberry Pi 4 Heatsink, Better Cooling Experience
- Awesome Looking, it can make your Pi looks Cooler than others
- NOTICE: Updated version can compatible with Pi 4 Model B
SmartiPi Touch 2 – Case for The Official Raspberry Pi 7" Touchscreen Display – with Cooling Fan
MakerFocus Raspberry Pi Power Over Ethernet Poe Hat Expansion Board(Raspberry Pi HAT Expansion Board) for Raspberry Pi 3 B+, with Brushless Cooling Fan, Supporting 802.3af Network Standard
- The Raspberry Pi Power over Ethernet HAT is a small accessory for the Raspberry Pi computer. It can only be used with the Raspberry Pi 3 Model B+ .
- Please ensure that your Raspberry Pi’s software is up to date for all functionality to be available, and there is no need to make other changes to the Raspberry Pi.
- Support 802.3af PoE network standard. The PoE HAT allows you to power your Raspberry Pi using Power over Ethernet–enabled networks
- for this product to be used, the network it is connected to needs to have power-sourcing equipment installed.
- The PoE HAT comes with a 25mm x 25mm small brushless cooling fan that is controlled by the Raspberry Pi via I2C.The fan will turn on and off automatically depending on the temperature of the main processor on the Raspberry Pi
- Fully isolated switch mode power supply (SMPS),37-57 V DC,Class 2 device,5V/2.5A DC output
- We Have a Strong After-sales Service Team: As long as you have any questions about the product, we will resolve your issue immediately if received your email, your satisfactory purchase experience is our greatest hope! How to email us? Plz click “MakerFocus” and click “Ask a question” to email us! Looking forward to your consultation!.
Features:
PoE HAT
Support 802.3af PoE network standard
Fully isolated switch mode power supply (SMPS)
37-57 V DC, Class 2 device; 5V/2.5A DC output
25mm x 25mm brushless cooling fan delivering 2.2CFM for processor cooling
Fan control
Hardware connection:
Before installing the PoE HAT, you must attach the supplied spacers in the four corners of the board.
Connect the PoE HAT to the Raspberry Pi 40pin and 4pin PoE interfaces. Once the PoE HAT board is connected, you can power the Raspberry Pi through its RJ45 network connector.
When unplugging the PoE HAT, pull evenly to make the module smoothly detach from the Raspberry Pi pin, avoiding the pin header.
Note:
Can only be powered by PoE devices that comply with the 802.3af standard.
The external power source used by the Raspberry Pi should comply with the relevant regulations and standards of the target country.
The connection of incompatible devices to the GPIO connection may affect compliance and result in damage to the unit.
Should be operated in a well ventilated environment, if used inside a case, the case should not be covered.
It should be placed on a smooth insulating surface during use and should not be in contact with conductive objects.
Do not block or block the fan, do not insert anything in the fan.
Do not expose this product to water, moisture or high temperatures. This product is designed to operate at normal room temperature.
Take care whilst handling to avoid mechanical or electrical damage to the printed circuit board and connectors.
Avoid handling the printed circuit board whilst it is powered and only handle by the edges to minimise the risk of electrostatic discharge damage.
Package Including:
1 * Raspberry Pi PoE HAT
1 * RPi screws pack
Geekworm Raspberry Pi 4 Embedded Heatsink with Fan, Raspberry Pi 4B Armor Aluminum Radiator with 5V Cooling Fan Compatible with Raspberry Pi 4 Model B Computer and Pi 4 Expansion Board
- This Geekworm Embedded Armor Aluminum Alloy Heatsink is only designed for Raspberry Pi 4 Model B 1GB/2GB/4GB Version, ultra-thin embedded heatsink with ONLY 7mm thickness.
- Supports to cooling down the Raspberry Pi 4 board when using the Pi 4 expansion board(do not support PoE board)
- It is compatible with Raspberry Pi 4 expansion board, for example: X825(ASIN:B07VXF2HJG), X856(ASIN:B082NZK9XL),X750(ASIN:B07VPWFK9H) to slove the raspberry pi 4 overheat problem.
- Consider different Raspberry Pi 4 expansion board has different height after installation, we add a variety of screws and copper spacers with different height as follow: 8 x M2.5×5 +5mm Spacers
- 4 x M2.5×13 +6mm Spacers
- 4 x M2.5×13 +6mm Spacers
- 4 x M2.5×14 +6mm Spacers
- 4 x M2.5×15 +6mm Spacers
- 4 x M2.5×16 +6mm Spacers
- Raspberry Pi HAT positioning hole is M2.5 internal thread
- (this design is convenient to fix), use good quality mute 5v cooling fan, don’t worry about the noise of fan
- Supports the installation of 25mm fans
- Cooling fan can be added when the heat dissipation of a single aluminum heat sink is not enough, so that all Pi 4 heat dissipation problems can be solved.
GeeekPi Raspberry Pi DockerPi Power Board For Raspberry Pi 4 Model B & Raspberry Pi 3B+, Power Supply with Safe Shutdown Auto Cooling Fan Expansion Board for Stack DockerPi Module & Raspberry Pi 2B/3B
- DockerPi PowerBoard is used to power the Raspberry Pi (or similar SBC) with a typical power of up to 20W (5V/4A) and can run up to 25W (5V/5A) with good heat dissipation.
- DockerPi PowerBoard also provides power to other DockerPi modules to protect the security of the power supply. It also provides a safe shutdown function, supports IR remote control switch, button control switch (Requires Driver,One-Step Automated Install).
- DockerPi PowerBoard has fan cooling, and we recommend that you install the DockerPi PowerBoard on the bottom of the other DockerPi.
- DockerPi PowerBoard recommends 12V 2A or above power input and 12V power from 4-pin headers to other DockerPi. (If other modules require 12V power)
- Wiki:https://wiki.52pi.com/index.php/DockerPi_PowerBoard_SKU:_EP-0104
Conclusion
By our suggestions above, we hope that you can found raspberry pi cooling hat for you.Please don’t forget to share your experience by comment in this post. Thank you!
