Which Is The Best Hydro Cooling For Gtx 1060

Product Description

Pre-filled, never needs refilling
Customer Service / Tech support: 1-888-222-4346 opt. 1

From the Manufacturer

Hydro Series H55 is the easy cooling upgrade for your Intel CPU. The efficient, self-contained liquid cooling system is quieter and more efficient than stock CPU fans, and the compact design makes it ideal for smaller cases.

Overview

The Easy Intel CPU Performance Upgrade

Your PC will run cooler and quieter when you replace your CPU’s standard heatsink with a Hydro Series H55.

Installation is straightforward: if you can get to the back of your PC’s motherboard, you can install an H55. All you’ll need is a screwdriver.

Great for Smaller Cases

The compact components and flexible tubing make Hydro Series H55 easy to install even if you’re cramped for space. It allows you to improve your CPU’s cooling efficiency even in most compact cases — as long as your case has a 120mm fan mount near the CPU, H50 will probably fit.

Features

Self-contained cooling system

Hydro Series H55 comes pre-filled, and never needs refilling or priming.

Tool-free mounting bracket kit

The modular design makes installation simpler, and it’s compatible with all modern Intel processors.

Low-noise, low-speed 120mm fan

The low speed and wide diameter reduces noise levels over the smaller, faster fans used on stock CPU coolers. The three-pin connector is compatible with fan controllers.

Low permeability rubber tooling

Minimal coolant evaporation helps ensure long life, and the resilient rubber offers both high flexibility and excellent leak protection.

Low-profile pump

The pump unit provides high-speed circulation without taking a lot of space. This makes installation easier, and helps improve your case’s airflow.

Latest generation micro-fin copper cold plate with pre-applied thermal compound

Copper has excellent thermal transfer characteristics, and the fin design is optimized for efficient heat exchange.

Low-profile black aluminum heat exchanger

The low-profile design reduces the airflow requirement, which helps make H55 quieter. The small size also allows for easier installation and improved compatibility, and the black finish looks great.

Corsair Hydro Series Liquid CPU Coolers

	H40	H55	H60	H70 CORE	H80	H80i	H100	H100i
CPU Compatibility	Intel, AMD	Intel, AMD	Intel, AMD	Intel, AMD	Intel, AMD	Intel, AMD	Intel, AMD	Intel, AMD
Fans Included	One 120mm	One 120mm	One 120mm	None	Dual 120mm	Dual 120mm	Dual 120mm	Dual 120mm
Fan Dimensions	120mm x 120mm x 25mm	120mm x 120mm x 25mm	120mm x 120mm x 25mm	—	120mm x 120mm x 25mm (x2)	120mm x 120mm x 25mm (x2)	120mm x 120mm x 25mm (x2)	120mm x 120mm x 25mm (x2)
Radiator Dimensions	150mm x 120mm x 25mm	120mm x 152mm x 27mm	120mm x 152mm x 27mm	152mm x 120mm x 38mm	120mm x 152mm x 42mm	120mm x 152mm x 38mm	122mm x 275mm x 25mm	120mm x 275mm x 27mm
Cold Plate	Aluminum	Copper	Copper	Copper	Copper	Copper	Copper	Copper
Corsair Link Compatible	—	—	—	—	✔ (with additional hardware)	✔	✔ (with additional hardware)	✔
Selectable Fan Profiles	—	—	—	—	✔	✔	✔	✔

EK-FC1080 GTX Ti FTW3 RGB is a high-performance full-cover water block for EVGA GeForce GTX 1080 Ti FTW3 based graphics cards, based on NVIDIA Pascal architecture (GP102). The water block comes with pre-installed 4-pin 12V RGB LED strip. This water block directly cools the GPU, RAM, and VRM (voltage regulation module) as water flows directly over these critical areas thus allowing the graphics card and it’s VRM to remain stable under high overclocks. EK-FC1080 GTX Ti FTW3 RGB water block features a central inlet split-flow cooling engine design for best possible cooling performance, which also works flawlessly with reversed water flow without adversely affecting the cooling performance. This kind of efficient cooling will allow your high-end graphics card to reach higher boost clocks, thus providing more performance during gaming or other GPU intense tasks. Moreover, such design offers great hydraulic performance allowing this product to be used in liquid cooling systems using weaker water pumps. The base of the block is CNC machined out of nickel-plated electrolytic copper while the top is CNC machined out of high-quality acrylic material. The sealing is ensured by quality rubber O-rings. Screw-in brass standoffs are pre-installed and allow for safe, painless installation procedure. This product is compatible with popular RGB sync technologies from all major motherboard manufacturers. The arrow marking on the 4-pin LED connector is to be aligned with the +12V marking on the RGB header. EKWB recommends the purchase of aesthetic retention backplate which improves the looks of your graphics cards and also provides some passive cooling to the circuit board VRM section. The EK-FC1080 GTX Ti FTW3 RGB water block is compatible with EK-FC1080 GTX Ti FTW3 Backplates and the factory EVGA backplate as well.

Model: 3830046996466

The glacier G1080 founders Edition is made from premium materials and finest standards of craftsmanship from Phanteks. From military standard Viton O-ring to the RGB LED lighting, all of our exceptionally high-quality materials are carefully selected. The water block features a nickel-plated copper cold plate, Acrylic top and sandblasted cover plates for an elegant look. Glacier G1080 founders Edition is a full cover water block. The G1080 founders Edition water block covers the entire PCB of the card allowing the graphics card and its VRM to remain cool and stable. The G1080 founders Edition water block has a 9mm copper base for higher level of heat dissipation and heat transfer. The sealing is ensured by DuPont Viton rubber washers. The military-grade Viton increase temperature capability and stands up to aggressive fluids. The Viton rubber washers offers ruggedness so seals and components resist damage during installation and use. The Viton retains sealing force to prevent leaks even after compression for long periods. Glacier G1080 founders Edition uses the same RGB connector as our Phanteks cases so installation will be a breeze. With the RGB control of our compatible Phanteks cases, the G1080 founders Edition can synchronize with the case. Use the included RGB adapter (ph-cb4rgb) and you can sync with motherboards’ that support the 4pin RGB header including the ROG aura/MSI mystic light. The water block features a connection terminal that has a significantly Reduced flow resistance for an outstanding cooling performance.

Hydro Series H110i GTX is an all-in-one liquid CPU cooler with a 280mmradiator and dual SP140L PWM fans for cooling that’s far superior to stock CPU air coolers. Liquid cooling works better than air cooling, and the self-contained design of the H110i GTX gets you up and running quickly so you can spend more time enjoying the performance of your overclocked processor and less time assembling, filling, and maintaining your cooling system. The H110i GTX has Corsair Link software control built in. Just attach the included cable to a USB header on your motherboard and download the software from Corsair.com, then customize and monitor your temps, fan and pump speeds, and even the RGB LED logo on the cold plate.
Customer Service / Tech support: 1-888-222-4346 opt. 1

Designed to exceed enthusiast’s expectations, the Thermaltake Water 3.0 Riing RGB 280 comes with dual 140mm high-static pressure patented LED fans with a large surface radiator, high performance waterblock and pump for ultimate CPU cooling. The built-in Riing fan adopted PWM fan, compression blades and hydraulic bearings that guarantee superior cooling performance and quiet operation. One simple upgrade allows users to enjoy better cooling performance and greater CPU protection!

Compatibility: Intel LGA 2066/2011-3/2011/1366/1156/1155/1151/1150, AMD TR4/AM4/FM2/FM1/AM3+/AM3/AM2+/AM2, *AIO Cooler bracket adapter comes in the AMD Threadripper CPU box.
Water Block: Material : Copper

Pump
Rated Voltage : 12 V
Rated Current : 175 mA

Fan
Dimension : 140 x 140 x 25 mm
Speed : 800 ~ 1500 R.P.M (PWM) , 400 ~ 1000 R.P.M (Low Noise Mode)
Noise Level : 18.5 ~ 26.4 dB-A
Rated Voltage : 12 V
Max. Air Flow : 22.14 ~ 40.6 CFM
Max. Pressure : 0.57 ~ 2.01 mm-H2O
Connector : 5 pin
Radiator: Dimension : 313 x 139 x 27 mm

Tube
Length : 326 mm
Material : Braided Tube
Weight: 1181g

Powered by GeForce GTX 1660 Ti integrated with 6GB GDDR6 WINDFORCE 2x cooling system with alternate spinning fans intuitive controls with a or us engine 6GB 192 Bit GDDR6 1 x HDMI, 3 x DisplayPort PCI Express 3.0 x16.Core Clock : 1845 MHz (Reference card is 1770 MHz)

Model: PLD09210S12HH
Voltage: DC 12V
Current: 0.40A
Fan Dimension (L x W x H): approx. 87mm x 87mm x 15mm
Mounting holes distance: approx. 28mm x 28mm x 28mm x 28mm(Center to Center)
Application:
For ASUS STRIX-GTX 980TI
STRIX-R9390-DC3OC-8GD5-GAMING
STRIX-R9390X-DC3-8GD5-GAMING
ROG STRIX-RX 480
ROG STRIX-GTX 1070
ROG-STRIX-GTX 1070 TI
ROG-STRIX-GTX 1080 TI
ROG STRIX-GTX 1080
ROG-STRIX-RX580
ROG STRIX-GTX 1060

The Corsair Hydro x series XR7 360mm water cooling radiator delivers extreme custom liquid cooling performance, with 54mm radiator thickness and 25 micron thin cooling fins maximizing heat dissipation surface area. A premium COPPER radiator core core is optimized for use alongside copper CPU and GPU water blocks, further increasing the thermal transfer rate. Intuitive extras such as integrated fan screw guides and built-in screw protection plates make it easy to install fans, without worrying about damaging the radiator. Equipped with standard G1/4″ Threads for universal compatibility and the surface area to tame even the highest-end hardware, The XR7 360mm radiator stands ready to cool even the most ambitious custom cooling loops and defeat the heat. Tech Support # 1-888-222-4346 opt #1

Conclusion

By our suggestions above, we hope that you can found hydro cooling for gtx 1060 for you.Please don’t forget to share your experience by comment in this post. Thank you!