homekitchenart Nowadays, there are so many products of holmes garage door parts in the market and you are wondering to choose a best one.You have searched for holmes garage door parts in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings holmes garage door parts which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
35,165 reviews analysed
P728 28-inch Plug-End Garage Door Spring (.177" #7 Wire)
- SPRINGS FOR YOUR ONE-PIECE GARAGE DOOR OR TOY HAULER – P728 springs handle a 90-150lb. door with 2 springs or a 150-300lb. door with 4 springs
- SIMPLE INSTALLATION – install new or replace old, rusty springs quickly and by yourself
- SAFETY CONTAINMENT ROD – if and when spring breaks, the coils will remain wrapped around middle rod for protection
- CORROSION RESISTANT – powder coated steel coils to help slow rusting process over spring life
- 1-YEAR WARRANTY – springs are warranted for 1 year from purchase date
The P728 28-Inch Plug-End Extension Spring is a Holmes spring replacement for one-piece garage doors as well as for toy haulers using lift springs. We recommend replacing all springs at the same time for balanced door lift and even wear. A c-hook is required for a single spring installation while a w-hook is required for a double spring installation – available separately. PROUDLY MANUFACTURED IN THE USA.
TECHNICAL DETAILS
- Two springs (one on each side) will lift a 90 – 150 lb. door
- Four springs (two on each side) will lift a 150 – 300 lb. door
- Safety containment rod to prevent spring from coming loose
- Minimum 1 in. low headroom required
- Length over coils = 28 in.
- Outside diameter = 1-5/16 in.
- Wire diameter gauge = (0.177) #7
- Initial tension = 110-120 lbs.
- Maximum allowable stretch = 18.5 in.
E900 HARDWARE™ 100% SATISFACTION GUARANTEE:
E900 HARDWARE™ products are distributed exclusively by WESSOL and are warranted against defects or failures for one year from the purchase date. Should you incur a defect or failure during this period, WESSOL will assist you or replace the product(s) at no additional cost.
Need Application Help?
We know that you want to be sure that you are replacing the correct garage door hardware! If you have any questions about this product’s compatibility for your specific application, please reach out and ask our experts!
PLEASE INSTALL ALL HARDWARE AS DIRECTED
SL730 30-Inch Lock-End Garage Door Spring (.177" #7 Wire)
- SPRINGS FOR YOUR ONE-PIECE GARAGE DOOR OR TOY HAULER – SL730 springs handle a 90-150lb. door with 2 springs or a 150-300lb. door with 4 springs
- SIMPLE INSTALLATION – install new or replace old, rusty springs quickly and by yourself
- SAFETY CONTAINMENT ROD – if and when spring breaks, the coils will remain wrapped around middle rod for protection
- CORROSION RESISTANT – powder coated steel coils to help slow rusting process over spring life
- 1-YEAR WARRANTY – springs are warranted for 1 year from purchase date
The SL730-C 30-Inch Lock-End Extension Spring is a Holmes spring replacement for one-piece garage doors as well as for toy haulers using lift springs. Replace all springs at the same time for balanced door lift and even wear. PROUDLY MANUFACTURED IN THE USA.
TECHNICAL DETAILS
- Two springs (one on each side) will lift a 90 – 150 lb. door
- Four springs (two on each side) will lift a 150 – 300 lb. door
- Safety containment rod to prevent spring from coming loose
- Minimum 1 in. low headroom required
- Length over coils = 30 in.
- Outside diameter = 1-5/16 in.
- Wire diameter gauge = (0.177) #7
- Initial tension = 110-120 lbs.
- Maximum allowable stretch = 20 in.
E900 HARDWARE™ 100% SATISFACTION GUARANTEE:
E900 HARDWARE™ products are distributed exclusively by WESSOL and are warranted against defects or failures for one year from the purchase date. Should you incur a defect or failure during this period, WESSOL will assist you or replace the product(s) at no additional cost.
Need Application Help?
We know that you want to be sure that you are replacing the correct garage door hardware! If you have any questions about this product’s compatibility for your specific application, please reach out and ask our experts!
PLEASE INSTALL ALL HARDWARE AS DIRECTED
HOLMES SPRING SL728C Holmes 1-Piece Replacement Extension Spring 28 in L, 90-150 Lb, Black
Holmes Extension Spring, 1-Piece, Replacement, 0.177 in Wire, 28 in Overall Length, Spring Latch End, 90 – 150 lb., Includes: (1) Connector, Used with Garage Door Hardware Assemblies. Replacement springs for use with garage door hardware assemblies. Spring latch end type. Connector included. Two SL728C, SL730C, or SL732C springs can support 90 to 150 LBS.
SL728 28-Inch Lock-End Garage Door Extension Spring (.177" #7 Wire)
- SPRINGS FOR YOUR ONE-PIECE GARAGE DOOR OR TOY HAULER – SL728 springs handle a 90-150lb. door with 2 springs or a 150-300lb. door with 4 springs
- SIMPLE INSTALLATION – install new or replace old, rusty springs quickly and by yourself
- SAFETY CONTAINMENT ROD – if and when spring breaks, the coils will remain wrapped around middle rod for protection
- CORROSION RESISTANT – powder coated steel coils to help slow rusting process over spring life
- 1-YEAR WARRANTY – springs are warranted for 1 year from purchase date
The SL728 28-Inch Lock-End Extension Spring is a replacement for Holmes-type springs for one-piece garage doors as well as for toy haulers using lift springs. Replace all springs at the same time for balanced door lift and even wear. PROUDLY MANUFACTURED IN THE USA.
TECHNICAL DETAILS
- Two springs (one on each side) will lift a 90 – 150 lb. door
- Four springs (two on each side) will lift a 150 – 300 lb. door
- Safety containment rod to prevent spring from coming loose
- Minimum 1 in. low headroom required
- Length over coils = 28 in.
- Outside diameter = 1-5/16 in.
- Wire diameter gauge = (0.177) #7
- Initial tension = 110-120 lbs.
- Maximum allowable stretch = 18.5 in.
E900 HARDWARE™ 100% SATISFACTION GUARANTEE:
E900 HARDWARE™ products are distributed exclusively by WESSOL and are warranted against defects or failures for one year from the purchase date. Should you incur a defect or failure during this period, WESSOL will assist you or replace the product(s) at no additional cost.
Need Application Help?
We know that you want to be sure that you are replacing the correct garage door hardware! If you have any questions about this product’s compatibility for your specific application, please reach out and ask our experts!
PLEASE INSTALL ALL HARDWARE AS DIRECTED
National Hardware N281-055 7690 Garage Door Extension Spring in Black
- The product is 25″x170LB GarExt Spring
- Elegant and smooth finish
- The product is manufactured in China
- End color coded orange per industry standards for easy identification
- Sold each, but replacement of all springs on a door at the same time is recommended
- Maximum overall safe length when stretched is 67-Inch
- Black painted finish
P336 36-inch Plug-End Garage Door Spring (.244" #3 Wire)
- SPRINGS FOR YOUR ONE-PIECE GARAGE DOOR OR TOY HAULER – P336 springs handle a 125-250lb. door with 2 springs
- SIMPLE INSTALLATION – install new or replace old, rusty springs quickly and by yourself
- SAFETY CONTAINMENT ROD – if and when spring breaks, the coils will remain wrapped around middle rod for protection
- CORROSION RESISTANT – powder coated steel coils to help slow rusting process over spring life
- 1-YEAR WARRANTY – springs are warranted for 1 year from purchase date
The P336 36-Inch Plug-End Extension Spring is a Holmes spring replacement for heavier one-piece garage doors as well as for toy haulers using lift springs. Replace all springs at the same time for balanced door lift and even wear. A c-hook is required for a single spring installation while a w-hook is required for a double spring installation – available separately. PROUDLY MANUFACTURED IN THE USA.
TECHNICAL DETAILS:
- Two springs (one on each side) will lift a 125 – 250 lb. door
- Safety containment rod to prevent spring from coming loose
- Minimum 1 in. low headroom required
- Length over coils = 36 in.
- Outside diameter = 2 in.
- Wire diameter gauge = (0.244) #3
- Initial tension = 165-185 lbs.
- Maximum allowable stretch = 24.25 in.
E900 HARDWARE™ 100% SATISFACTION GUARANTEE:
E900 HARDWARE™ products are distributed exclusively by WESSOL and are warranted against defects or failures for one year from the purchase date. Should you incur a defect or failure during this period, WESSOL will assist you or replace the product(s) at no additional cost.
Need Application Help?
We know that you want to be sure that you are replacing the correct garage door hardware! If you have any questions about this product’s compatibility for your specific application, please reach out and ask our experts!
PLEASE INSTALL ALL HARDWARE AS DIRECTED
P528 28-Inch Plug-End Garage Door Spring (.207" #5 Wire)
- SPRINGS FOR YOUR ONE-PIECE GARAGE DOOR OR TOY HAULER – P528 springs handle a 105-175lb. door with 2 springs or a 200-350lb. door with 4 springs
- SIMPLE INSTALLATION – install new or replace old, rusty springs quickly and by yourself
- SAFETY CONTAINMENT ROD – if and when spring breaks, the coils will remain wrapped around middle rod for protection
- CORROSION RESISTANT – powder coated steel coils to help slow rusting process over spring life
- 1-YEAR WARRANTY – springs are warranted for 1 year from purchase date
The P528 28-Inch Plug-End Extension Spring is a Holmes spring replacement for heavier one-piece garage doors as well as for toy haulers using lift springs. Replace all springs at the same time for balanced door lift and even wear. A c-hook is required for a single spring installation while a w-hook is required for a double spring installation – available separately. PROUDLY MANUFACTURED IN THE USA.
TECHNICAL DETAILS
- Two springs (one on each side) will lift a 105 – 175 lb. door
- Four springs (two on each side) will lift a 200 – 350 lb. door
- Safety containment rod to prevent spring from coming loose
- Minimum 1 in. low headroom required
- Length over coils = 28 in.
- Outside diameter = 1-5/8 in.
- Wire diameter gauge = (0.207) #5
- Initial tension = 135-145 lbs.
- Maximum allowable stretch = 22 in.
E900 HARDWARE™ 100% SATISFACTION GUARANTEE:
E900 HARDWARE™ products are distributed exclusively by WESSOL and are warranted against defects or failures for one year from the purchase date. Should you incur a defect or failure during this period, WESSOL will assist you or replace the product(s) at no additional cost.
Need Application Help?
We know that you want to be sure that you are replacing the correct garage door hardware! If you have any questions about this product’s compatibility for your specific application, please reach out and ask our experts!
PLEASE INSTALL ALL HARDWARE AS DIRECTED
P532 32-inch Plug-End Garage Door Spring (.207" #5 Wire)
- SPRINGS FOR YOUR ONE-PIECE GARAGE DOOR OR TOY HAULER – P532 springs handle a 105-175lb. door with 2 springs or a 200-350lb. door with 4 springs
- SIMPLE INSTALLATION – install new or replace old, rusty springs quickly and by yourself
- SAFETY CONTAINMENT ROD – if and when spring breaks, the coils will remain wrapped around middle rod for protection
- CORROSION RESISTANT – powder coated steel coils to help slow rusting process over spring life
- 1-YEAR WARRANTY – springs are warranted for 1 year from purchase date
The P532 32-Inch Plug-End Extension Spring is a Holmes spring replacement for heavier one-piece garage doors as well as for toy haulers using lift springs. Replace all springs at the same time for balanced door lift and even wear. A c-hook is required for a single spring installation while a w-hook is required for a double spring installation – available separately. PROUDLY MANUFACTURED IN THE USA.
TECHNICAL DETAILS
- Two springs (one on each side) will lift a 105 – 175 lb. door
- Four springs (two on each side) will lift a 200 – 350 lb. door
- Safety containment rod to prevent spring from coming loose
- Minimum 1 in. low headroom required
- Length over coils = 32 in.
- Outside diameter = 1-5/8 in.
- Wire diameter gauge = (0.207) #5
- Initial tension = 135-145 lbs.
- Maximum allowable stretch = 26.5 in.
E900 HARDWARE™ 100% SATISFACTION GUARANTEE:
E900 HARDWARE™ products are distributed exclusively by WESSOL and are warranted against defects or failures for one year from the purchase date. Should you incur a defect or failure during this period, WESSOL will assist you or replace the product(s) at no additional cost.
Need Application Help?
We know that you want to be sure that you are replacing the correct garage door hardware! If you have any questions about this product’s compatibility for your specific application, please reach out and ask our experts!
PLEASE INSTALL ALL HARDWARE AS DIRECTED
Lasko 20″ High Velocity QuickMount, Silver-Easily Converts from a Floor Wall Fan, 2265QM
- 3 Powerful Speeds – makes this fan ideal for the garage, shop, attic, or anywhere else you need a high velocity fan. The powerful motor and metal fan blades provide a cooling breeze through out the room.
- Pivoting Head to Direct Air Flow & Circulation – allows you to direct high velocity air up, down, or anywhere in between making this fan ideal for cooling or ventilation of an area.
- QuickMount for Easy Conversion from Floor to Wall Mount – simply mount the included bracket to the wall and easily convert your fan from a floor fan to a wall fan. The fan’s stand, clips right into the mount and in seconds you have a wall mounted fan.
- Built to Last – with a metal fan cage and stand this fan is strong enough to last in workplace settings yet suitable for around the house thanks to built-in rubber pads on the fan stand.
- Simple No Tools Assembly – means you’ll have your fan assembled in no time. Simply follow the included instructions to assemble the fan with the fan stand and you’re done.
Lasko’s 20″ High Velocity Fan with QuickMount features 3 powerful speeds with metal fan blades to deliver maximum air movement. QuickMount allows you to easily convert from wall to floor use.
Additional features include:
- QuickMount for easy conversion from floor to wall mount
- Pivots to direct air flow & circulation
- 3 powerful speeds
- Built-in carry handle
- Rubber pads to protect surfaces
- Simple no-tools assembly
Century Spring 7W32 Garage Door Extension Spring Plug End, 1-5/16" x 32"
32 inch L x 1-5/16 inch W, garage door spring, with #7 wire, the product has good very quality and the product is made in china.
Conclusion
By our suggestions above, we hope that you can found Holmes Garage Door Parts for you.Please don’t forget to share your experience by comment in this post. Thank you!
Our Promise to Readers
We keep receiving tons of questions of readers who are going to buy Holmes Garage Door Parts, eg:
- What are Top 10 Holmes Garage Door Parts for 2020, for 2019, for 2018 or even 2017 (old models)?
- What is Top 10 Holmes Garage Door Parts to buy?
- What are Top Rated Holmes Garage Door Parts to buy on the market?
- or even What is Top 10 affordable (best budget, best cheap or even best expensive!!!) Holmes Garage Door Parts?…
- All of these above questions make you crazy whenever coming up with them. We know your feelings because we used to be in this weird situation when searching for Holmes Garage Door Parts.
- Before deciding to buy any Holmes Garage Door Parts, make sure you research and read carefully the buying guide somewhere else from trusted sources. We will not repeat it here to save your time.
- You will know how you should choose Holmes Garage Door Parts and What you should consider when buying the Holmes Garage Door Parts and Where to Buy or Purchase the Holmes Garage Door Parts. Just consider our rankings above as a suggestion. The final choice is yours.
- That’s why we use Big Data and AI to solve the issue. We use our own invented, special algorithms to generate lists of Top 10 brands and give them our own Scores to rank them from 1st to 10th.
- You could see the top 10 Holmes Garage Door Parts of 2020 above. The lists of best products are updated regularly, so you can be sure that the information provided is up-to-date.
- You may read more about us to know what we have achieved so far. Don’t hesitate to contact us if something’s wrong or mislead information about Holmes Garage Door Parts.
