homekitchenart 
Nowadays, there are so many products of raspberry pi mini cooling fan in the market and you are wondering to choose a best one. You have searched for raspberry pi mini cooling fan in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings raspberry pi mini cooling fan which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
Easycargo Raspberry Pi Fan 30x30x7mm, Raspberry Pi Cooling Fan Brushless 3.3V 5V DC Quiet Fan for Raspberry Pi 4, Pi 3 B+, Pi 3B, Pi 2, Pi B+, RetroFlag NESPI Case (30mmx30mmx7mm) (Black 4-Pack)
Easycargo EDL3007S05 raspberry pi cooling fan is built for low-noise and durable cooling performance. This fan is suitable for Raspberry Pi B / Raspberry Pi B+ / Raspberry Pi A+ / Raspberry Pi 2, Pi 3 model B and B+ and Raspberry Pi 4. The One-to-Two wire connector pins of this fan, can get connected into Raspberry Pi 3.3V or 5V pin to provide optional fan speed and optimum air flow adjustment. This fan can be installed for most of the standard Raspberry Pi cases and also is compatible with RetroFlag NESPI Case.
Specifications:
– Fan Size: 30x30x7.5 mm (LxWxH)
– Wire Length: 2.6 inches (66mm)
– Connector: One-to-Two pin
– Color: Black
– Bearing Type: Hypro Bearing
– Operating Voltage: DC 3.3V – 5V
– Start up Voltage: DC 3V
– Current: 120 mA
– Speed: 5000RPM±15%
– Airflow: 1.79CFM
– Noise Level: 15.92dBA
– Life Time: 30,000 hours
Package Includes: Easycargo EDL3007S05 Raspberry Pi Fan, together with screw and nut set.
Similar items with 4 stars and above
Dorhea 2pcs Raspberry Pi 4 Fan 30x30x7mm Raspberry Pi Brushless Cooling Fan Brushless 3.3V 5V DC Quiet Fan for Raspberry Pi 4, Pi 3 B+, Pi 3 B, Pi 2, Pi B+, Pi Zero/Zero W,Robot Project
- High Quality — 100% brand new and in good condition,with high quality ,great performance
- Super Quiet — Cooling fan run smoothly(15.92dBA), Long life (30,000 hours) keep CPU safe without overheating
- Unique Terminal Interface — with two terminals, Its connector is separating, One-to-Two interface connector Interface for dual speed mode (3.3V and 5V DC)
- Compatible with — Raspberry Pi B, B+, A+, 2, 3, 4 model B and B+ and Pi Zero/Zero W other robotic projects and development boards
- This fan can be installed for most of the standard Raspberry Pi cases and also is compatible with RetroFlag NESPI Case
Specifications:
– Fan Size: 30x30x7.5 mm (LxWxH)
– Wire Length: 2.6 inches (66mm)
– Connector: One-to-Two pin
– Color: Black
– Bearing Type: Hypro Bearing
– Operating Voltage: DC 3.3V – 5V
– Start up Voltage: DC 3V
– Noise Level: 15.92dBA
– Life Time: 30,000 hours
Suitable for Raspberry Pi B / Raspberry Pi B+ / Raspberry Pi A+ / Raspberry Pi 2 and Pi 3 Model B+ / Raspberry Pi 3 / Raspberry Pi 4/ Pi Zero/Zero W
Package Including
2 X Cooling Fan
8 X Nuts
8 X Screw
Similar items with 4 stars and above
AC Infinity MULTIFAN Mini, Compact 40mm x 20mm USB Fan for VR Gear, Aquarium, Roku, Router, Raspberry Pi, Cosplay, Helmet Cooling Ventilation
- Compact and energy-efficient USB fan designed various DIY cooling and ventilation projects.
- Features a multi-speed controller to set the fan’s speed to optimal noise and airflow levels.
- Dual-ball bearings have a lifespan of 67,000 hours and allows the fans to be laid flat or stand upright.
- USB plug can power the fan through USB ports found behind electronics and on portable power banks.
- Dimensions: 1.6 x 1.6 x 0.8 in. | Airflow: 12 CFM | Noise: 18 dBA| Bearings: Dual Ball
MakerFocus 2pcs Raspberry Pi DC Brushless Cooling Fan Heatsink Cooler Radiator Connector Separating One-to-Two Interface 3.3V 5V for Raspberry Pi 2/ Pi 3/3B+ and Pi Zero/Zero W or Other Robot Project
- √. Installation Screws Included: Don’t need to purchase screws by yourself. Intimate service, easy to install!
- √. Super Quiet: This fan will not make you feel uneasy during they are working, but also a quiet experiment environment for you. Perfect Cooling Tool: Allows your Raspberry Pi or other experimental tools to quickly dissipate heat and will extend the working life of your Pi or other development boards!
- √. Unique Terminal Interface: It with two terminals, Its connector is separating, One-to-Two interface, can choose 3.3V or 5V. According to the voltage requirements in accordance with your needs to choose which to use
- Working voltage: 3.0-5.8V
- Current: 0.18A. Air volume: 5 m³/ h
- Number of revolutions: 13200RPM.
- √. Suitable for A Variety of Products: Pi fan, Raspberry Pi zero w heatsink, suitable for Raspberry Pi 2/ Pi 3/3B+ and Pi Zero/Zero W, Retroflag NESPi case and Nespi Case. Not only using them for Raspberry Pi but also for cooling of a desert traversing robot project. It just another addition to them fleet. Will works wonderfully!
- √. Strong After-sales Service Team: As long as you have any questions about the product, we will resolve your issue immediately if received your email, your satisfactory purchase experience is our greatest hope! How to email us? Plz click “MakerFocus” and click “Ask a question” to email us! Looking forward to your consultation!
2pcs Raspberry Pi DC Brushless Cooling Fan Heatsink Cooler Radiator Connector Separating One-to-Two Interface 3.3V 5V for Raspberry Pi 2/ Pi 3/3B+ and Pi Zero/Zero W
Features:
This Pi fan not only support Raspberry Pi 2/ Pi 3/3B+ and Pi Zero/Zero W, but compatible with other development board.
Its connector is separating, One-to-Two interface, can choose 3.3V or 5V.
Rated voltage: DC5V
Working voltage: 3.0-5.8V
Current: 0.18A
Air volume: 5 m³ / h
Number of revolutions: 13200RPM
Noise: 18 dB
Package Including
2 * pi fan
8 * nuts M2.5
8 * screw M2.5 * 14mm
MakerFocus Raspberry Pi 3 Case Protective Case, Raspberry Pi 3.5 inch Display Case, with Mini Cooling Fan Heatsink Kit for Raspberry Pi 3B, 3B+,2B,2B+ Compatible with Raspberry Pi 3.5 inch Display
- Installation instructions video: ★https://drive.google.com/file/d/1n6y5fzvX74SwWc_HFvO6YHhfe32-4vgi/view
- ★https://drive.google.com/open?id=1rx11diEefXeZ3Ig40MzuMXO3-9tdFoo3. PLZ NOTE: ★This case is not compatible with 3.5 Inch HDMI TFT LCD Display, It is designed to RPI 3.5 Inch GPIO Display, ★The 3.5 inch screen is not included!!!
- Dual-use: You can use it only on the Raspberry Pi motherboard, or use it on the Raspberry Pi motherboard and Raspberry Pi 3.5inch display,Then decide whether to cover the its cover. (Note: The Raspberry Pi motherboard and Raspberry Pi 3.5inch display are not included!!!)
- Can install mini cooling fan: The case when used without the display screen, you can install mini cooling fan, Snap-in installation, the cooling fan was included in packaging.
- With GPIO open position: There is a GPIO open position on this case cover,when you use it only with Raspberry Pi motherboard, it can easy to pull up and insert the GPIO pins, don’t need to open the cover. This case is easy to install and has good ventilation.
- With cable guide hole: It reserved cable guide hole for the camera, more convenient to use with camera(Rpi camera purchase link: https://www.amazon.com/dp/B06XYDCN5N).
Raspberry Pi 3 Case Protective Case, Raspberry Pi 3.5 inch Display Case, Enclosure Box with Mini Cooling Fan Heatsink Kit for Raspberry Pi 3B, 3B+,2B,2B+ Compatible with Raspberry Pi 3.5 inch Display
This protective case is designed specifically for the Raspberry Pi 2 Model B/B+ and Raspberry Pi 3 Model B and 3.5inch display;
It provides the best available protection/accessibility for the Raspberry Pi 2 Model B and Raspberry Pi 3 Model B and 3.5 inch display.
This case is easy to install and has good ventilation, it can install the cooling fan when you have not use the display.
There is a GPIO open position with this case, easy to pull up and insert the GPIO pins, don’t need to open the case.
It with a compact design, simple and elegant, transparent environmental protection material.
Package Including:
1 * Raspberry Pi Case
3 * Heat Sink
1 * Mini Cooling Fan with screws
iUniker Raspberry Pi 4 Case, Raspberry Pi 4b Case with Fan Raspberry Pi Fan Case with Raspberry Pi 4 Heatsink Raspberry Pi Heatsink for Raspberry Pi 4 Model B/Pi 3B+/ Pi 3B/ 2B
Aokin 4 PCS Raspberry Pi Fan 30x30x7mm Cooling Fan Brushless CPU Cooling Fan Heatsink Cooler Radiator Connector Separating One-to-Two Interface 3.3V 5V for Raspberry Pi 4 Pi 3 B+, Pi 3, Pi 2, Pi 1 B+
- ????Suitable for A Variety of Products: Pi fan, 30x30x7mm Raspberry Pi zero w heatsink, suitable for Raspberry Pi 4 Pi 2/ Pi 3/3B+ and Pi Zero/Zero W, Retroflag NESPi case and Nespi Case. Not necessarily using them for Raspberry Pi but rather for cooling of a desert traversing robot project. This fan gives a smooth and quick working performance, which will provide you a perfect working space.
- ????Super Quiet: This fan will not make you feel uneasy during they are working, but also a quiet experiment environment for you. Perfect Cooling Tool: Quickly dissipate heat for your Raspberry Pi or other experimental tools to and extend the lifespan of your Pi or other development boards.
- ????Unique Terminal Interface: It with two terminals, Its connector is separating, One-to-Two interface, can choose 3.3V or 5V. According to the voltage requirements in accordance with your needs to choose to use
- Working voltage: 3.0-5.8V
- Current: 0.18A. Air volume: 5m³ / h
- Number of revolutions: 13200RPM.
- ????Installation Screws Included: Don’t need to purchase screws by yourself. Screws Included. Fast installation in seconds. Intimate service, easy to install!
- ????Sleeve fan suitable for Raspberry Pi 4 and 3 B+. One-to-Two wire connector Interface for dual speed mode (3.3V and 5V DC), Compatible with other robotic projects and development boards
Aokin 4pcs Raspberry Pi DC Brushless Cooling Fan Heatsink Cooler Radiator Connector Separating One-to-Two Interface 3.3V 5V for Raspberry Pi 4 Pi 2/Pi 3/3B+ and Pi Zero/Zero W or Other Robot Project
Features:
This Pi fan not only support Raspberry Pi 2/ Pi 3/3B+ and Pi Zero/Zero W, but compatible with other development board.
Its connector is separating, One-to-Two interface, can choose 3.3V or 5V.
Rated voltage: DC5V
Working voltage: 3.0-5.8V
Current: 0.18A
Air volume: 5m³ / h
Number of revolutions: 13200RPM
Noise: 18 dB
Package Including:
4 * pi fan
16 * nuts M2.5
16 * screw M2.5 * 14mm
SUNON Brushless Mini DC Cooling Fan 30mm x 30mm x15mm GM0503PHV2-8 3015 5V 0.4W
– Ultra quiet Low-speed brushless DC fan – Size: 30mm (L) x 30mm (W) x 15mm (H) – Material: High Quality Plastic Housing – 5 Plastic Blades – Speed: 7000 RPM – Airflow: 4.8CFM – Noise: 20 DBA – Rating: DC 5V , 0.4W; for Raspberry Pi 2/Pi 3 Case
GDSTIME Raspberry Pi Cooling Fan, 30x30x7mm for Raspberry Pi 4 Model B, 3 B+, Pi 3, Pi 2, Pi 1 B+ Cooling
- Dimension of outer the frame is 30mm(L) x 30mm(W) x 7mm(H) / The size of fan in inch is 1.18in(L) x 1.18in(W) x 0.28in(H)
- The center to center distance beween the mountiong holes is 24±0.3mm/0.94in.
- Operating Voltage Range：4.5V to 5V. (overtake to 5V, it can also work. but not safe, and seriously affects lifespan of fan.)
- Rated Current: 0.1Amp
- Speed: 8500RPM
- Air flow: 2.65CFM
- Noise: 26dBA
- Connector: Dupont
- Lead wire: UL Type (+): Red wire
- (-): Black wire. This is a two wire cooling fan
- Bearing Type: Sleeve Bearing
- Life: working up to 35000h at 25 degrees.
- Please Comfirm the Fan Size, Voltage, Connector and other parameters before purchase.
Package include:
1pcs fan include mounting screws & nuts
Dimensions: 30x30x7mm
Connector: Dupont
Rated Voltage: DC 5V
Rated Current: 0.1 Amp
Rated Speed: 8500 RPM
Air flow: 2.65 CFM
Noise: 26 dBA
Bearing Type: Sleeve Bearing
Life: 35000 hours at 25 degrees
Cable Lenght: 15cm or 5.9 inches
Weight: 7g or 0.25oz
Similar items with 4 stars and above
Conclusion
By our suggestions above, we hope that you can found raspberry pi mini cooling fan for you.Please don’t forget to share your experience by comment in this post. Thank you!
