The Best 50 Hp Mercury Outboard Water Pump 1985

Water Pump Kit With Housing for Johnson & Evinrude

EMP Part # 46-07000

This is a water pump repair kit for Johnson and Evinrude water pumps. This kit includes a impeller (396809), impeller key, impeller plate (320981), pump housing (384087), rubber seals, oil seal, o-ring and screws. Below you can find a application guide for this kit. If you do not see the water pump parts you need for your engine or can not find a listing for your engine please feel free to call.

***PLEASE NOTE SOME ORIGINAL PUMPS HAVE A ONE PIECE IMPELLER CUP, THIS PUMP HAS A 2 PIECE CUP AND WILL REPLACE THE ORIGINAL CUPS***

Replaces OMC Part #: 396933, 439077

Replaces SIerra Part #: 18-3399

Fits the Following Johnson Evinrude Applications:

HP/ModelYear

40 hp1884 – 1988
45 hp (Commercial)1986 – 1989
48 hp1986 – 1988
50 hp1986 – 1988
55 hp (Commercial)1986 – 1989
60 hp Twin1980 – 1985

This extensive kit fits 9.9 hp 4-stroke outboards (USA made serial number 0G760300 through 0T979999 and BEL assembled 0P075166 through 0P325499) plus 15 hp Mercury BigFoot 4-stroke outboards (USA made serial number 0G590000 through1B727495 and BEL assembled 997311 and up). See your owner’s manual for replacement schedule. See your service manual for installation instructions. The Quicksilver brand is the leader in delivering uncompromising engine oils, parts and accessories to the marine industry for over 65 years.  Quicksilver is the premier supplier of Mercury Marine Original Equipment replacement engine parts, oils, and accessories, but also works to serve all Original Equipment brands in the marine and powersports industries.  It has earned a loyal following by providing the highest quality products that are tested through some of the most rigorous environments and testing procedures. No aftermarket company comes close to the level of research and design as Quicksilver; buying Quicksilver is buying performance, protection and peace of mind.

This extensive kit fits Mercury and Mariner outboards from the 65 hp (4-cylinder) through V-6 outboards with short vane impellers. It also fits MerCruiser I, R, MR and Alpha One drives (serial number 2495186 through 0D469858). See your owner’s manual for replacement schedule. See your service manual for installation instructions. The Quicksilver brand is the leader in delivering uncompromising engine oils, parts and accessories to the marine industry for over 65 years.  Quicksilver is the premier supplier of Mercury Marine Original Equipment replacement engine parts, oils, and accessories, but also works to serve all Original Equipment brands in the marine and powersports industries.  It has earned a loyal following by providing the highest quality products that are tested through some of the most rigorous environments and testing procedures. No aftermarket company comes close to the level of research and design as Quicksilver; buying Quicksilver is buying performance, protection and peace of mind.

This water pump repair kit fits your Mercury F40-60 4-stroke Bigfoot/Command Thrust outboard, 60 hp 2-cycle BigFoot (serial number 0D000750 and above). It fits 75-115 4-stroke outboards, 150 EFI 4-stroke outboards and 70-90 hp 2-cycle outboards (serial number 0A996142 and above). It fits 100-125 Hp. 2-cycle (4 cylinder) models having pump cover screws without insulators. It also fits V-200/225/250 (3.0L) 2-cycle outboards. This pump repair kit fits all 4-cylinder and 6-cylinder Verado (with 4.80 dia. torpedo gearcases) outboards. This versatile water pump repair kit also fits MerCruiser Alpha One Gen II drives (serial number 0D469859 and above). See your owner’s manual for replacement schedule. See your service manual for installation instructions. The Quicksilver brand is the leader in delivering uncompromising engine oils, parts and accessories to the marine industry for over 65 years.  Quicksilver is the premier supplier of Mercury Marine Original Equipment replacement engine parts, oils, and accessories, but also works to serve all Original Equipment brands in the marine and powersports industries.  It has earned a loyal following by providing the highest quality products that are tested through some of the most rigorous environments and testing procedures. No aftermarket company comes close to the level of research and design as Quicksilver; buying Quicksilver is buying performance, protection and peace of mind.

Water Pump Kit (Complete) for 1976-1985 Mercury V6

Kit Includes: impeller, upper water pump housing with water pump cup already installed, water pump base, impeller wear plate and the necessary gaskets and o-rings to rebuild your water pump.

GLM Part Number: 12150
Replaces Merc Part Number: 46-78400A2
Replaces Sierra Part Number: 18-3316

Fits the Following Mercury Outboard Applications:
V-150 (Serial Number 5432022 – 0A904645) 1978-1985
V-175 (Serial Number 4301235 – 6618750) 1976-1985
V-200 (Except 3.0L) (Serial Number 4839034 – 6625220) 1978-1985
V-225 (Serial Number 5628028 and Up) 1980-1981

Water pump repair kit 96148A8 is for Mercury and Mariner 65 hp (4-cylinder) through V-6 outboards with short-vane impellers. It also fits MerCruiser I, R, MR and Alpha stern drives (serial number 2491586 through 0D469858). The kit includes water impeller, plastic pump housing, face plate, gaskets, drive key, face seal, seal carrier and water tube coupling. One of the most complete kits available to repair 4-stroke outboard water pumps. See your owner’s manual or service manual for specific applications and replacement instructions. The Quicksilver brand is the leader in delivering uncompromising engine oils, parts and accessories to the marine industry for over 65 years. Quicksilver is the premier supplier of Mercury Marine original Equipment replacement engine parts, oils, and accessories, but also works to serve all original Equipment brands in the marine and powersports industries. It has earned a loyal following by providing the highest quality products that are tested through some of the most rigorous environments and testing procedures. No aftermarket company comes close to the level of research and design as Quicksilver; buying Quicksilver is buying performance, protection and peace of mind.

Replaces the following part numbers:

Mercury 46-77177A3

Sierra 18-3324

GLM 12100-

Fits the following models :

1989 – 1997 30 hp JET Serial # 0C159200 thru 0G589999

1984 – 1989 35 hp (2 CYL.) Serial # 6445653 & Up

1978 – 1979 402, 40 hp (2 CYL.) Serial # 4860103 thru 5556229

1980 – 1983 40 hp (2 CYL.) Serial # 5556230 thru 6445653

1989 – Up 40 hp (4 CYL.) Serial # 0C159200 & Up

1986 – Up 45 hp (4 CYL.) Serial # 5531630 & Up

1978 – 1985 50 hp (4 CYL.) Serial # 4962056 & Up

1984 – 1990 50 hp (3 CYL.) Serial # 6428681 thru 0D000749

1984 – 1990 60 hp (3 CYL.) Serial # 6428681 thru 0D000749

1976 65 hp (650) (3 CYL.) Serial # 4382057 thru 4571651

1979 – 1983 70 hp (3 CYL.) Serial # 4977157 thru 6428680

Note:

Please verify your exact HP, serial number range & motor year uses one of the part numbers above before ordering as many look similar.  Please verify the part number you need matches the entire number including the “A” suffix number at the end of the part number. Matching the correct part number including the “A” suffix number is critical for proper fitment.

The picture can tell more than we can, what you see is what you will receive,please make sure it will fit your machine before bidding it.

Please check pictures for more details.

Application:

Fits Following Johnson Evinrude Outboard:

• Johnson Evinrude V4 / V6 / V8  1982 – 1992
• Johnson Evinrude V4 Cross 20″ & 25″ Models 1993-1998
• Johnson Evinrude 90hp Looper (except SL Model) 1995-2006
• Johnson Evinrude 115hp Looper (except SL Model) 1995-2006
• Johnson Evinrude 120hp 1985 – 1992
• Johnson Evinrude 120hp “S” suffix 25″ Models 1993
• Johnson Evinrude 120hp 20″ Models 1994 – 2000
• Johnson Evinrude 130hp 20″ Models 1994 – 2000
• Johnson Evinrude 135hp V4 20″ Models  2001
• Johnson Evinrude 140hp  1979-1981
• Johnson Evinrude 140hp  1985 – 1992
• Johnson Evinrude 140hp 20″ Models 1994 – 2000
• Johnson Evinrude 150hp 1979-1981
• Johnson Evinrude 150hp V6 20″ Models 1993
• Johnson Evinrude 150hp “GL”, “SL”, & “SPL” 20″ Models 1996 – 1999
• Johnson Evinrude 175hp 1979-1981
• Johnson Evinrude 175hp V6 20″ Models 1993
• Johnson Evinrude 175hp “GL”, “SL”, & “SPL” 20″ Models 1996 – 1999
• Johnson Evinrude 200hp 1979-1981
• Johnson Evinrude 200hp 1986 – 1992
• Johnson Evinrude 200hp 20″ Models 1999
• Johnson Evinrude 200hp “HG” & “HGL” 2000
• Johnson Evinrude 225hp 1986 – 1992
• Johnson Evinrude 225hp 20″ Models 1999
• Johnson Evinrude 225hp “HG” & “HGL” 2000
• Johnson Evinrude 225hp DI 20″ Models 1999
• Johnson Evinrude 235hp  1979-1981
• Some Johnson Evinrude 250hp-300hp 1985 & Late

Product Description

Delta Square Steel Liquid Transfer Tank for trucks features 14 gauge construction for long term durability. Internal baffles reinforce the high strength design & control the flow of the contents when moving. Pressure tested for leaks. Color : White Safety Fill Capacity: 50 Gallon 2″ NPT reinforced bungs Built-in lifting rings to assist with lifting and moving an empty tank Heavy-duty brackets to secure the tank to the truck bed; all brackets must be bolted to the truck bed Lockable filler cap and coupler prevent excessive pressure build up Pressure tested for leaks

From the Manufacturer

FEATURES

• Designed for holding & transporting most liquids
• Heavy-duty, 14-gauge reinforced steel construction for long-term durability
• Four shapes for convenience
• Model 48050 includes bright, tread plate aluminum cover over steel tanks
• Full center baffles for extra strength. 2″ NPT reinforced bungs and tie-down bar for stability
• Lockable cap and coupler allow outside venting
• Combine with Delta Crossovers to create flexible storage capacity
• Pressure tested for safety
• Built-in lifting ring for moving empty tank
• Larger models have two built-in lifting rings
• Optional prevent fuel cap kit available
• Filter system recommended

SPECIFICATIONS

• Square – 50 Gallon

Our Promise to Readers

We keep receiving tons of questions of readers who are going to buy 50 Hp Mercury Outboard Water Pump 1985, eg:

• What are Top 10 50 Hp Mercury Outboard Water Pump 1985 for 2020, for 2019, for 2018 or even 2017 (old models)?
• What is Top 10 50 Hp Mercury Outboard Water Pump 1985 to buy?
• What are Top Rated 50 Hp Mercury Outboard Water Pump 1985 to buy on the market?
• or even What is Top 10 affordable (best budget, best cheap or even best expensive!!!) 50 Hp Mercury Outboard Water Pump 1985?…
• All of these above questions make you crazy whenever coming up with them. We know your feelings because we used to be in this weird situation when searching for 50 Hp Mercury Outboard Water Pump 1985.
• Before deciding to buy any 50 Hp Mercury Outboard Water Pump 1985, make sure you research and read carefully the buying guide somewhere else from trusted sources. We will not repeat it here to save your time.
• You will know how you should choose 50 Hp Mercury Outboard Water Pump 1985 and What you should consider when buying the 50 Hp Mercury Outboard Water Pump 1985 and Where to Buy or Purchase the 50 Hp Mercury Outboard Water Pump 1985. Just consider our rankings above as a suggestion. The final choice is yours.
• That’s why we use Big Data and AI to solve the issue. We use our own invented, special algorithms to generate lists of Top 10 brands and give them our own Scores to rank them from 1st to 10th.
• You could see the top 10 50 Hp Mercury Outboard Water Pump 1985 of 2020 above. The lists of best products are updated regularly, so you can be sure that the information provided is up-to-date.
• You may read more about us to know what we have achieved so far. Don’t hesitate to contact us if something’s wrong or mislead information about 50 Hp Mercury Outboard Water Pump 1985.