homekitchenart 
Nowadays, there are so many products of refrigerator water line cap in the market and you are wondering to choose a best one. You have searched for refrigerator water line cap in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings refrigerator water line cap which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
SharkBite 1/2-Inch End Cap, Push-to-Connect, PEX, Copper, CPVC
- INSTALLS IN SECONDS: 1/2-inch end cap requires no soldering, crimping, or glue–just push to create a watertight seal
- VERSATILE: Fits PEX, copper, CPVC, HDPE, PE-RT, and CTS pipe and connects them in any combination
- COMPATABILITY: Same as part numbers U514LFZ and U514LF
- QUALITY: SharkBite quality and performance is field-proven with more than 550 million connections
- SharkBite is the only push-to-connect brand that can ensure a clean, leak-free connection
- CERTIFIED: SharkBite fittings are certified to 200 PSI and 200 degrees Fahrenheit and can be reused up to 4 times
Product Description
Cap off pipe in seconds with the SharkBite Push-to-Connect 1/2-Inch End Cap. This plumbing fitting caps copper, PEX, CPVC, HDPE, or PE-RT pipe. With no soldering, clamps, or glue required, capping is as simple as inserting a pipe into the fitting deep enough to be sealed by the specially-designed O-ring. Once inserted, the fitting’s stainless steel teeth bite down and grip the pipe. Disassembly is just as easy with the SharkBite disconnect tool. The SharkBite End Cap is designed for potable water and radiant heating applications (including underground or behind-the-wall applications) with no access panels required.
SharkBite products work with your existing plumbing, are easy to disassemble for changing and reusing fittings, and can be rotated for easier installation in tight spaces. SharkBite fittings are lead-free and meet all requirements for plumbing in California and Vermont. Whether you need to repair a broken pipe or plumb a whole house, SharkBite fittings are the push-to-connect solution for leak-free results.
SharkBite is a provider of plumbing and water control systems for domestic, commercial, and industrial applications. Trusted by plumbing professionals, SharkBite manufactures a wide range of plumbing fittings, water control valves, and PEX pipe, making it the only total plumbing solution from meter to fixture.
From the Manufacturer
SharkBite is the push-fit connection system that’s really taking hold. It’s the easiest way to join copper, CPVC or PEX pipe in any combination – with no soldering, clamps, unions or glue. Just insert the pipe and the stainless steel teeth bite down and grip tight, while a specially formulated O-ring compresses to create a perfect seal. Disassembly is just as fast using the simple disconnect tool. So fittings and valves can be easily changed and reused. They can even be rotated after assembly for easier installation in tight spaces. Get SharkBite, and get a grip on your next plumbing project. These fittings are lead free and meet all requirements for plumbing in California and Vermont.
[10-Pack] PROCURU 1/2-Inch PushFit End Cap – Plumbing Fitting for Copper, PEX, CPVC, Lead Free Certified (0.5 Inch (1/2"), 10-Pack)
- SIZE & APPLICATION: 1/2″ (Pack of 10), Connect to 1/2″ Copper tubing, PEX tubing, CPVC pipe, HDPE pipe, and PE-RT
- LIFETIME WARRANTY: The “Gold Standard” of Push-Fit fittings- Designed and manufactured by the plumbing experts.
- PUSH-TO-CONNECT PIPE: Easiest and fastest way to join Copper, CPVC, or PEX pipe. No need for installation tools, glue, or soldering! Simply push to connect pipe.
- PROFESSIONAL GRADE: Dezincification resistant brass (DZR) construction, 100% Leak Proof Up to 200°F and 200 PSI.
- HIGHEST STANDARDS OF QUALITY: Certified & Compliant UPC, CSA, ANSI/NSF-61, ASSE.
PROCURU Push-Fit Fitting provides super easy, safe, and trouble-free solution to joining pipe of various materials including Copper, PEX, and PVC. No installation tools is necessary: NO solder, NO torch, NO wrench, NO glue! Meets and exceeds the latest plumbing and building codes, PROCURU Push-Fit is specified and recommended by the industry’s leading experts. Pack of 10 per order.
SharkBite UIP520A 1-Inch 1" PVC Cap (IPS) Push-To-Connect
SharkBite PVC cap is the most efficient PVC pipe cap due to its push-to-connect design. These PVC pipe plugs make a great pipe plug for stub outs and pressure testing a home or PVC water line as they take no time to cure after installation.
Whirlpool 2260518B Water Filter Cap for Refrigerator
- Works with models: ED2FHEXVB00, ED2FHEXVL00, ED2KVEXVQ00, ED2KVEXVL, ED2JHEXTS00, ED2FHEXVS00
- Replacement Part
- Works with models: ED2FHEXVB00, ED2FHEXVL00
- Works with model: ED2KVEXVQ00
- Works with model: ED2KVEXVL
- Works with model: ED2JHEXTS00, ED2FHEXVS00
- Genuine Replacement Part
Product Description
A genuine OE replacement part, the 2260518B Whirlpool PUR refrigerator water filter cap fits easily into place in the black bottom grille of your refrigerator. Colored black to ensure it perfectly matches your existing grille and the part you are replacing. Proudly made in the USA. Get the replacement 2260518B Whirlpool PUR water filter cap your refrigerator needs by adding this to your cart now. Finalize your order today!
From the Manufacturer
Whirlpool 2260518B Water Filter Cap for Refrigerator. Works with models: ED2FHEXVB00, ED2FHEXVL00, ED2KVEXVQ00, ED2KVEXVL, ED2JHEXTS00, ED2FHEXVS00. Genuine Replacement Part.
SharkBite U514LF 1/2-Inch End Stop, Pack of 12
- The SharkBite Connection System is an instant push-fit connection that connects copper tubing, CTS CPVC and PEX pipe in any combination
- No soldering, clamps, unions or glue required
- Certified to 200 PSI and 200-DegreeF
- Compact, robust DZR brass body is the foundation of a strong, corrosion resistant, durable fitting
Product Description
The SharkBite push-fit fittings are the fastest, easiest way to join copper, CPVC, or PEX tubing in any combination. Each fitting increases ease of use while decreasing the time and effort needed to connect water distribution pipe. There is no glue, soldering or crimping needed. Simply cut your pipe, debar, mark the pipe approximately 1 (for proper insertion depth), install pipe to proper depth and you’re done.
From the Manufacturer
The SharkBite push-fit fittings are the fastest, easiest way to join copper, CPVC, or PEX tubing in any combination. Each fitting increases ease of use while decreasing the time and effort needed to connect water distribution pipe. There is no glue, soldering or crimping needed. Simply cut your pipe, debar, mark the pipe approximately 1 (for proper insertion depth), install pipe to proper depth and you’re done.
1/2" End Cap U514LF with Disconnect Clip – Lead Free Brass Fitting for Copper, PEX, CPVC, HDPE and PE-RT Residential or Commercial Plumbing – 100% Satisfaction Guarantee (4 Pack)
- *** For Copper, PEX, CPVC, HDPE, PE-RT Pipe ***
- Made in USA
- INSTALLS IN SECONDS: Quick Push-Fit connection insures a clean leak free connection with no special tools, no soldering, no clamping or crimping, no unions or glue – EASY Just push to create a water tight seal.
- COPPER, PEX, CPVC: TigerBite plumbing fittings fits copper tubing, and CTS CPVC and PEX and connects all three types in any combination.
- INSTALLATION TIPS: (1) Gently cut tubing squarely while maintaining tubing roundness. (2) Remove abrasions & deformations from tubing exterior that may inhibit tight O-ring seal. (3) If tubing’s already stiff and holds roundness discard nylon stiffener (i.e copper, and PEX) – To remove stiffener safely, release grip ring contact with disconnect clip, while pulling stiffener with pliers.
- (4) For easier install – Apply stiffener to flexible tubing types before inserting into coupling. (5) Mark 1” insertion depth on tubing to indicate when tubing seats properly beyond O-ring. (6) Push tubing beyond O-Ring for water tight seal – Observing mark ends up near coupling body. (7) Disconnecting – While pressing disconnect clip towards coupling body to release internal grip ring contact, rotate and pull.
- CERTIFIED: TIgerBite fittings are certified to 200 PSI and 200 degrees Fahrenheit (93 degrees Celsius). Certified to ANSI/NSF-61 and ASSE 1061 product standard for use in potable water and hydronic heating water distribution and is the only brand to provide a lifetime warranty.
- INCLUDES: (4) 1/2″ End Cap, (1) 1/2″ Disconnect Clip, and (1) Push-Fit Installation Tips.
- Integral tube liner for PEX installations which means no loose connections.
- Made of Lead Free DZR (dezincification resistant) brass which provides a strong, durable fitting that is corrosion resistant.
- It’s the easiest way to join copper, CPVC or PEX pipe in any combination. Just insert the pipe and the stainless steel teeth bite down and grip tight, while a specially formulated O-ring compresses to create a perfect seal. Disassembly is just as fast using the simple disconnect tool. So fittings and valves can be easily changed and reused. They can even be rotated after assembly for easier installation in tight spaces. These fittings are lead free and meet all requirements for plumbing in California and Vermont.
- Lifetime Warranty.
Helpful Hints:
Do not attempt to insert the tubing into the stiffener while the stiffener is inside the fitting because the stiffener will not properly seat into the PEX. Remove the stiffener (using the disconnect clip and needle-nose pliers), and insert it into the PEX and then insert the PEX into the fitting. (Most people get a water tight seal without the stiffener so they elect not to use it.)
10 PIECES 1/2" PUSH FIT CAPS
- PUSH FIT easiest and fastest way to join copper, CPVC or PEX pipe in any combination
- LEAD FREE brass body. Foundation of a strong, corrosion resistant, durable fitting.
- Certified to ANSI/NSF-61 and ASSE 1061,Max presure: 200psi/Max temperature: 200F
- Approved to be used underground and behind walls without access panels
- SAME/1 DAY HANDLING TIME, USING 1-3 DAYS PRIORITY MAIL W.TRACKING # AND INSURED
XFITTING – The Push-Fit connection system it’s the easiest and fastest way to join copper, CPVC or PEX pipe in any combination – with no soldering, clamps, unions or glue. Just insert the pipe and the stainless steel teeth bite down and grip tight, while a specially formulated O-ring compresses to create a perfect seal. Just push connect by hands, within 1 minutes to finish installation, makes our life more efficient, fast, save time and strength and your money. Disassembly is just as fast using the simple disconnect tool. So fittings and valves can be easily changed and reused. They can even be rotated after assembly for easier installation in tight spaces. Get a grip on your next plumbing project. · Instant Push-Fit connection for increased ease-of-use. · No soldering, clamps, unions, or glue required. · Fits copper tubing, and CTS CPVC and PEX and connects all three types in any combination. · Integral tube liner for PEX installations, so no loose components, ensures secure, reliable connection.
1 PIECE XFITTING 1/2" PUSH FIT CAPS
- PUSH FIT easiest and fastest way to join copper, CPVC or PEX pipe in any combination
- LEAD FREE brass body. Foundation of a strong, corrosion resistant, durable fitting.
- Certified to ANSI/NSF-61 and ASSE 1061,Max presure: 200psi/Max temperature: 200F
- Approved to be used underground and behind walls without access panels
- SAME/1 DAY HANDLING TIME, USING 1-3 DAYS PRIORITY MAIL W.TRACKING # AND INSURED
XFITTING – The Push-Fit connection system it’s the easiest and fastest way to join copper, CPVC or PEX pipe in any combination – with no soldering, clamps, unions or glue. Just insert the pipe and the stainless steel teeth bite down and grip tight, while a specially formulated O-ring compresses to create a perfect seal. Just push connect by hands, within 1 minutes to finish installation, makes our life more efficient, fast, save time and strength and your money. Disassembly is just as fast using the simple disconnect tool. So fittings and valves can be easily changed and reused. They can even be rotated after assembly for easier installation in tight spaces. Get a grip on your next plumbing project. · Instant Push-Fit connection for increased ease-of-use. · No soldering, clamps, unions, or glue required. · Fits copper tubing, and CTS CPVC and PEX and connects all three types in any combination. · Integral tube liner for PEX installations, so no loose components, ensures secure, reliable connection.
3/4" Copper End Cap (Pack of 10pcs.)
3/4″ Copper End Cap (Pack of 10pcs.)
Apollo Copper Push ACPCAP12 1/2-inch Copper Push Cap
- Push-Fit design allows for a simple and fast installation on any combination of Copper, pex, CPVC or pe-rt pipe
- Fittings can be rotated after being installed for ease of use in tight space
- ideal for potable water and hydronic heating applications
- Meets UPC, ipc and cupc requirements and listed by IAPMO and listed to ASSE 1061/NSF 61
- Maximum working pressure of 200 psi and maximum temperature of 250˚f
- Removal tool allows for fitting removal (sold separately)
1/2 inch copper push cap
Conclusion
By our suggestions above, we hope that you can found refrigerator water line cap for you.Please don’t forget to share your experience by comment in this post. Thank you!
![ICEPURE Refrigerator Water Filter, Compatible With Whirlpool 4396701,4396702,EDR6D1,Filter 6,L200V,Kenmore 9915, 46-9915 [3PACK]](https://images-na.ssl-images-amazon.com/images/I/613fHkW%2Bg0L._SL1200_.jpg "ICEPURE Refrigerator Water Filter, Compatible With Whirlpool 4396701,4396702,EDR6D1,Filter 6,L200V,Kenmore 9915, 46-9915 [3PACK]")
