homekitchenart 
Nowadays, there are so many products of hot water ciculation pump 110 volt in the market and you are wondering to choose a best one. You have searched for hot water ciculation pump 110 volt in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings hot water ciculation pump 110 volt which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
13,034 Reviews Scanned
KOLERFLO 3/4 Inch 110V Circulating Water Pump Hot Water Circulation Pump/Circulator Pump for Hot Water System(RS15-6 Green)
- Rated power: 93/67/46 W. NPT 3/4 inch (19.05 mm) inlet/outlet. Voltage/Frequency: 110-120V, 60Hz. Max pressure: 145 psi (10 bar),the circulation pump with three-speed control. Flow: 36/29/20 LPM (9.5/7.66/5.28 GPM). Max head: 6/4.9/4 m (20/16/13 ft)
- Pump housing: Aluminum. Impeller: Corrosion-resistant, composite, PES. Shaft: 45 # steel. Bearing: Carbon axia.
- Easy installation, only need a wrench to connect the pump to the pipeline, saving you the cost of plumbers
- Instant hot water, waiting for 2-3 minutes in the past, now it takes only 15 seconds to get hot water.
- Prevent pipes from freezing in winter, especially for cold winter areas. In addition, if your pipes pass through the floor, the floor will also become warm.
- The circulation water pump features high efficiency with low consumption. High temperature resistance, anti-fraying, high flow and leak-tightness. Super silent, environmental friendly,saving energy, running power, reducing the waste of cold water and waiting time, suitable for water scarce areas, such as desert areas.
- KOLERFLO circulation water pump RS15-6 Used in Suitable for city buildings, suburban villas, houses, water and pressurized with industrial equipment, air conditioning, boilers, solar circulating water, hot water circulating warm and so on.
Product Details
Model: RS15-6
Rated Power: 93/67/46W
Outlet: 3/4 inch
Max Flow: 36/29/20L/min
Rated Head: 20/16/13m
Volt/Freq: 110-120V/60Hz
Applications
Used in Suitable for city buildings, suburban villas, houses, water and pressurized with industrial equipment, air conditioning, boilers, solar circulating water, hot water circulating warm and so on
Advantages
1.High efficiency, high flow, leak-tightness, low consumption
2.No noise environmental protection, ease of installation
3.No leakage, low noise, environmental protection, aesthetics, ease of installation and so on
4.Built-in high sensitive electronic sensors with three-speed control
Performance Datas
1) Suitable for medium: Hot water and ethanol maximum ratio of 1:1
2) Performance: Liquid temperature range: 0℉ – +212℉Maximum working pressure 10bar
3) Ambient temperature: not higher than 40
4) Voltage: 110-120V(±10%) ,Frequency: 60Hz.
5) Motor: Protection class IP44 Insulation class F
6) Material: Stainless Steel, PP, ceramics
7) Mounting position: Shaft horizontal mounting
8) Pump settings: Single-phase pipeline pump 3 files manually controlled single-phase motor is not overloaded casting pump length 130 mm
Similar items with 4 stars and above
EXTRAUP 3/4 NPT 110V Hot Water 3-Speed Cast Iron Circulation Pump Circulator Pump
- Power: 100/67/46W,Volt/Freq: 110-120v/60Hz.
- Outlet: 3/4″In,Max Head: 6.0m,Max Flow: 30L/min,Liquid temperature range: 0℉ -+212℉
- Pump housing: Aluminium
- Impeller: PP
- Motor wire: Copper
- Shaft: Ceramic
- Bearing: China.
- No leakage, low noise, environmental protection, aesthetics, ease of installation and so on.
- Suitable for city buildings, suburban villas, houses, water and pressurized with industrial equipment.
FEATURES:
1.Rated Power(W):100/67/46
2.Voltage/Frequency/110-120v/60HZ
3.Inlet/Outlet:3/4″
4.Max Flow: 30L/min
5.Max Head: 6.0m
6.Pump housing: Aluminum
7.Impeller: PP
8.Motor wire: Copper
9.Shaft: Ceramic
10.Bearing: China
11.Liquid temperature range: 0℉ -+212℉
Application:
Suitable for city buildings, suburban villas, houses, water and pressurized with industrial equipment.
PACKAGE CONTENT:
1x circulation pump
2x copper connector; 2x copper nut; 2x rubber gasket
1x user manual
Happybuy RS15-6 Hot Water Recirculating Pump 110V Circulation Pump 3/4-Inch NPT 3-speed Recirculation Pump 9.5 Gpm for Water Heater System
- 【MAIN PARAMETER】 – The hot water circulation pump features NPT 3/4 inch (19.05 mm) inlet/outlet. Voltage/Frequency: 110-120V, 60Hz. Rated power: 93/67/46 W. Max pressure: 145 psi (10 bar),the hot water circulation pump with three-speed control. Flow: 36/29/20 LPM (9.5/7.66/5.28 GPM). Max head: 6/4.9/4 m (20/16/13 ft)
- Pump housing: Aluminum. Impeller: Corrosion-resistant, composite, PES. Shaft: 45 # steel. Bearing: Carbon axia
- 【CONVENIENT】 – Easy installation, just need a wrench to connect the pump to the pipeline, saving you the cost of plumbers
- Instant hot water, waiting for 2-3 minutes in the past, now it takes only 15 seconds to get hot water (the kitchen takes about 1 minute to get hot water due to low flow restriction)
- 【HUMANIZED DESIGN】 -Prevent pipes from freezing in winter, especially for cold winter areas. In addition, if your pipes pass through the floor, the floor will also become warm.
- 【ADVANTAGE】 – The hot water circulation pump features high efficiency with low consumption. High temperature resistance, anti-fraying, high flow and leak-tightness. Super silent, environmental friendly,saving energy, running power, reducing the waste of cold water and waiting time, suitable for water scarce areas, such as desert areas
- 【WIDE APPLICATION】 – Our hot water circulation pump RS15-6 is suitable for a wide range of applications, for city buildings, suburban villas, houses, water and pressurized with industrial equipment, air conditioning, boilers, solar circulating water, hot water circulating warm and so on
bayite BYT-7A015 DC 12V Solar Hot Water Heater Circulation Pump with DC Power Supply Adapter Low Noise 3M Head 8LPM 2.1GPM
- Circulation pump is non-self-priming pump (0 Suction Height). Max Flow Rate: 2.1GPM, Max Discharge Head: 9.8ft. Max system pressure: 10Bar(145PSI) . This doesn’t mean the pump produces 145PSI. It means the pump can be connected to the system less than 145PSI pressure
- 1/2″ Male thread on the pump. The OD of the brass coupler is 3/8”(10mm). Plug type: 2.1mm x 5.5mm female
- Power source: DC 12V(POWER ADAPTER INCLUDED). Rated current: 0.7A, Brushless Motor, Low noise: 30db at 1 metre, Service life: 30000 hours. Please note: If you use this pump for circulating wort it should be cleaned out after using it
- Max circulating water temperature: 100°C/212°F. It’s submersible but can’t be immersed in hot water exceeding 50°C/122℉
- One year warranty: replacement or full refund without return
It’s perfect for the home solar water heating systems or other circulation pump application.
Brushless Motor,Super long working life,low consumption and low noise
Power source: DC 12V
Rated current: 0.7A
Low noise: 30db at 1 metre
Service life: 30000 hours up
Inlet/Outlet: 1/2″ male thead. Fit both 1/2″ NPT and BSP female thead. We’ve tested. w/ two brass coupler
Circulation pump is non-self-priming pump (0 Suction Height).
Max Flow Rate: 8L/Min(2.1GPM)
Max Water Head: 3 metre(9.8ft)
Max system pressure: 10Bar(145PSI). This doesn’t mean the pump produces 145PSI. It means the pump can be connected to the system less than 145PSI pressure.
Max circulating water temperature: 100°C/212°F. Can’t be immersed in hot water exceeding 50°C/122℉
Please note: If you use this pump for circulating wort it should be cleaned out after using it.
Item included:
1x DC 12V Solar Hot Water Circulation Pump
1x AC 110V- 240V to DC 12V 2A Power Supply Adapter
BOKYWOX 120W 110-120V Food Grade Automatic Circulator Booster Pump NPT3/4” Stainless Steel Domestic Hot Water Circulation Pump （RS15/9SR）
- 1.No leakage,low noise,environmental protection,aesthetics,ease of installation and so on.
- 2..Automatic circulation pump,Suitable for medium: Hot water and ethanol maximum ratio of 1:1.
- 3.High temperature resistance, anti-fraying ,high efficiency, high flow.
- 4.Liquid temperature range 0℉ – 212℉ Maximum working pressure 6bar.
- 5.Can be used directly in drinking water pipelines. The water taste of lubricating oil will disappear after 3 to 5 times of use. The shaft of pump should be kept horizontal after installation.
Similar items with 4 stars and above
BACOENG 3/4” 110V/115V Hot Water Circulation Pump/Circulator Pump For Solar Heater System With US Plug
- Flexible Application – Directly Used in Floor Heating System and Hot Water Recirculating System. Also a Wise Choice for DIY: Add a timer to be more energy saving. Add a bridge valve to be used in no return pipe system.
- SMART Connector: 5.5 Ounces Lead-Free Brass Fitting. Smart Design Shortens the setup or disassembly time to within 10 seconds. 1/2″ Deep Thread prevent the Tube from leaking.
- FEATURES: Built-in high sensitive electronic sensors with three-speed control. High temperature resistance. Super silent, environment friendly.
- Material: Pump housing: Cast Iron
- Impeller: Corrosion-resistant, Composite, PES
- Shaft: Ceramic
- Bearing: Carbon axial
- Rated Power:93/67/46W Inlet/Outlet:3/4” Voltage/Frequency:115V/60HZ Installation length:5.1inches Liquid temperature range:32 – 230℉
Happybuy RS15-9 Hot Water Recirculating Pump 110V Circulation Pump 1-Inch NPT 3-speed Recirculation Pump 8 Gpm for Water Heater System
- 【MAIN PARAMETER】 – The hot water circulation pump features 1×3/4 inch (25.4×19.05 mm) inlet/outlet. Voltage/Frequency: 110-120V, 60Hz. Rated power: 100 W. Max pressure: 145 psi (10 bar)，Pump housing: Aluminum. Impeller: Corrosion-resistant, composite, PES. Shaft: 45 # steel. Bearing: Carbon axia
- 【CONVENIENT】 – Easy installation, just need a wrench to connect the pump to the pipeline, saving you the cost of plumbers
- Instant hot water, waiting for 2-3 minutes in the past, now it takes only 15 seconds to get hot water (the kitchen takes about 1 minute to get hot water due to low flow restriction)
- 【HUMANIZED DESIGN】 -Prevent pipes from freezing in winter, especially for cold winter areas. In addition, if your pipes pass through the floor, the floor will also become warm.The hot water circulation pump features an automatic switch, which allows the pump to work in manual or autonomous mode.
- 【ADVANTAGE】 – The hot water circulation pump features high efficiency with low consumption. High temperature resistance, anti-fraying, high flow and leak-tightness. Super silent, environmental friendly,saving energy, running power, reducing the waste of cold water and waiting time, suitable for water scarce areas, such as desert areas
- 【WIDE APPLICATION】 – Our hot water circulation pump is suitable for a wide range of applications, for city buildings, suburban villas, houses, water and pressurized with industrial equipment, air conditioning, boilers, solar circulating water, hot water circulating warm and so on
BACOENG 3/4" 110V NPT Hot Water Circulation Pump Circulating Pump For Solar Heater Circulator US Plug
- 1. Rated Power:93/67/46W Inlet/Outlet:3/4″NPT Voltage/Frequency: 110V/60HZ
- 2. Super silent, environmental protection, aesthetics, ease of installation.
- 3. Built-in high sensitive electronic sensors with three-speed control.
- 4. Material for Pump housing:STAINLESS STEEL
- Impeller: Corrosion-resistant, Composite, PES
- Shaft: Ceramic
- Bearing: Carbon axial
- 5.High temperature resistance, anti-fraying ,high efficiency, high flow,leak-tightness, low consumption
Similar items with 4 stars and above
Trupow 120W 3/4" NPT 110V Hot Water Automatic Circulation Pump Cast Iron Circulator Pump
- 1.Outlet: 3/4″In,Max Head: 9.0m,Max Flow: 30L/min,Liquid temperature range: 0℉ -+212℉
- 2.Rated Power: 120W,Volt/Freq: 110-120v/60Hz.
- 3.No leakage, low noise, environmental protection, aesthetics, ease of installation and so on.
- 4.Suitable for city buildings, suburban villas, houses, water and pressurized with industrial equipment.
- 5.Pump housing: Aluminium
- Impeller: PP
- Motor wire: Copper
- Shaft: Ceramic
- Bearing: China.
BOKYWOX 110V 93W NPT3/4” 3-Speed Food Grade Home Recirculating Pump Hot Water Circulator Circulation Pump （RS15/6G）
- 1.Can be used directly in drinking water pipelines. The water taste of lubricating oil will disappear after 3 to 5 times of use. The shaft of pump should be kept horizontal after installation.
- 2.Max Pressure 11bar.Power Cord: 4.1ft. Liquid temperature range: 0℉ -+212℉
- 3.No leakage, low noise, environmental protection, aesthetics, ease of installation and so on.
- 4.Suitable for medium: Hot water and ethanol maximum ratio of 1:2. Not suitable for potable water.
- 5.Materials: Pump housing: Cast Iron
- Impeller: Corrosion-resistant, Composite, PES
- Shaft: Ceramic
- Bearing: Carbon axial.
Specifications:
Rated Power:93/67/46W
Outlet:3/4 inch
Max Flow:36/29/20 L/min
Rated Head:20/16/13m
Volt/Freq:110-120V/60Hz
Application:
Used in Suitable for city buildings, suburban villas, houses, water and pressurized with industrial equipment,air conditioning,boilers,solar circulating water, hot water circulating warm and so on.
Advantages:
No leakage,low noise, environmental protection, aesthetics,ease of installation and so on.
Features:
High temperature resistance, antifraying,long life,maintenance-free,super silent,leak-tightness,high efficiency,low consumption,high flow and convenient installation advantages.
Performance Datas:
1).Suitable for medium: Hot water and ethanol maximum ratio of 1:1.
2).Performance: Liquid temperature range 0℉ – +212℉Maximum working pressure 10bar.
3).Ambient temperature: not higher than 40.
4).Voltage:110-120V(±10%) ,Frequency: 60Hz.
5).Motor: Protection class IP44 Insulation class F.
6).Material: Cast iron,PP,ceramics.
7).Mounting position: Shaft horizontal mounting.
8).Pump settings: Single-phase pipeline pump 3 files manually controlled single-phase motor is not overloaded casting pump length 130 mm.
Similar items with 4 stars and above
Conclusion
By our suggestions above, we hope that you can found hot water ciculation pump 110 volt for you.Please don’t forget to share your experience by comment in this post. Thank you!
