homekitchenart 
Nowadays, there are so many products of ek water cooling petg tube fittings in the market and you are wondering to choose a best one. You have searched for ek water cooling petg tube fittings in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings ek water cooling petg tube fittings which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
Thermaltake Pacific DIY OD 16mm (5/8") x ID 12mm (1/2") Water Cooling PETG Hard Tube Bending Kit CL-W093-AL00BL-A
- Near Perfect Bends: Essential for making precise bends when using 16mm OD PETG tube
- Mandrels: Includes Mandrels for 45/90/180/360 degree bends
- Pipe Cutter: Professional Grade Pip Cutter provides perfect beveled edge cuts
- Insert: Silicone Tube insert prevents kinks and help promote smooth bends while keeping inner wall diameter
- Mounting: Pre-drilled holes allow easy mounting of mandrels to flat surface
- Recommended use of soapy water assists with tube insertion and tube heating
- Warranty: 2 Years
EKWB EK-HD PETG Tube, 10/12mm, 500mm, Clear, 4-Pack
EK-HD PETG Tube is solid type PETG tubing intended for use with EK-HD push-in adapters and EK-HDC series compression fittings. The tubing may be heat treated to achieve certain bends. For expert users only! It is mandatory to chamfer the edges of freshly cut tube in order to prevent gasket (O-ring) damage. EK recommends a 0.5mm x 45° chamfer.
Model: TR-3831109841396-4P
EKWB EK-HD PETG Tube, 12/16mm, 500mm, Clear, 8-Pack
EK-HD PETG Tube is solid type PETG tubing intended for use with EK-HD push-in adapters and EK-HDC series compression fittings. The tubing may be heat treated to achieve certain bends. For expert users only! It is mandatory to chamfer the edges of freshly cut tube in order to prevent gasket (O-ring) damage. EK recommends a 0.5mm x 45° chamfer.
Model: TR-3831109841402-8P
EKWB EK-DuraClear Soft Tubing, 10/13mm (3/8" ID, 1/2" OD), 3 Meter, Clear
EK-DuraClear is the most advanced liquid cooling tubing, designed and manufactured for the most demanding customers, who want to use soft tubing in their builds. The EK-DuraClear structure is formulated to enable it to perform in a wide range of closed loop cooling systems, making it the top choice for every liquid cooling enthusiast.
Our top priority during the development of this tube was the prevention of bacterial growth on the tubing wall. To eliminate this problem, EK-DuraClear has very smooth inner walls that prevent any kind of bacterial adhesion. Tested in the most extreme environments, the EK-DuraClear is guaranteed to withstand far worse conditions that would ever appear in the everyday use.
One of the most important features that the soft tube should have is the flexibility and good bend ratio without kinks. EK-DuraClear has one of the best bend ratios on the market. Doing a tight turn in your liquid cooling build has never been easier! Tighter bends without kinking will allow you to have no reduction in cooling performance whatsoever.
Unlike the matte black EK ZMT Tube, EK-DuraClear is a transparent tube, designed to be used with EK-Ekoolant cooling liquids. Colored liquid realy gives your build a touch of personality and there is nothing more beautiful than matching colors of liquid with your hardware.
Features:
– Highly durable
– Transparent
– UV Resistant
– Logo Free (no print on tube)
– Inner Wall resilience
– Environmentally responsible, safe and non-toxic product
Technical Specifications:
– Material: PVC
– Color: Clear, not UV-reactive (resistant to UVA & UVB)
– Length: 3 meters
– Operating temperature range: -20°C to 80°C
Dimensions:
– Internal diameter (ID): 9,5 mm (3/8″)
– Outer diameter (OD): 12,7 mm (1/2″)
Model: 3831109850961
fosa 4 Pcs/8 Pcs OD 16mm Tube Fitting, Water Cooling Compression Fitting with Sealing Ringsfor Rigid AcrylicTube for Computer Water Cooling System(Black, 4 Pcs)
- Suitable for 16mm outer diameter rigid tube (Including plastic material and metal material tubes)
- Three-layer sealing rings, good sealing performance, eliminating leakage risks
- High quality brass materials, durable for long term use
- Fine workmanship, has passed EU ROHS certification
- A variety of colors can be chosen for your different needs
Specifications:
Suitable: for 16mm Outer Diameter Rigid Tube
Model: YGKN-C16MM
Material: Brass
Options: 4pcs Red, 4pcs Blue, 4pcs Green, 4pcs White, 4pcs Black, 4pcs Silver, 6pcs(Red+Blue+Green+White+Black+Silver)
Inner Diameter: Approx. 17mm / 0.67in
Weight: 77-160g
Package List:
4 or 6 x Water Cooling Tube Fittings
8 or 12 x Sealing Rings
EKWB EK-Torque HTC-16 Compression Fitting for EKWB Rigid Tubing, 16mm OD, Nickel, 4-Pack
- EK-Torque HTC 16 Nickel fittings are EK’s new minimalistic 16mm hard-tube compression fittings designed for use with solid tubing such as Acrylic and PETG
- They can be complemented by interchangeable aesthetic color rings, and are an ideal choice for anyone and a perfect match with EK-Quantum series products (aesthetic rings are sold separately)
- The locking ring prevents solid tube to be pulled out of the fitting by compressing the rubber gasket underneath the ring
- The base fitting surface is smooth and has no adequate gripping surface, but the inside of the barb is socketed with a 9mm hex Allen key pattern
- The outer diameter of a fitting: 24mm
EK-Torque HTC 16 Nickel fittings are EK’s new minimalistic 16mm hard-tube compression fittings designed for use with solid tubing such as Acrylic and PETG. With a non-intrusive, yet striking look, and with NO added branding at all. They can be complemented by interchangeable aesthetic color rings.
The locking ring prevents solid tube to be pulled out of the fitting by compressing the rubber gasket underneath the ring. The grooves on the outside allow for easier hand tightening. The compression ring has cutouts in EK Quantum signature shape allowing for the colored aesthetic ring to be shown. The colored rings are available in many colors and are screwed onto the fitting before the compression locking ring. The aesthetic rings are sold separately.
The fitting barb and the compression rings are covered with a unique, high-quality nickel finish. Both are made of CNC machined brass and the seal is made quality rubber O-rings.
The base fitting surface is smooth and has no adequate gripping surface, but the inside of the barb is socketed with a 9mm hex Allen key pattern. It’s highly recommended to use an Allen Key 9mm (purchased separately) to prevent skin damage to the fingertips while installing the fitting.
Technical data:
– Thread: G1/4″ BSP; 4.5mm male thread length
– Supported tube: 16mm OD
– The outer diameter of a fitting: 24mm
– Installed height: 15mm
PLEASE NOTE:
- Please wet the o-ring using drops of water prior to installing the solid tube.
- Do not use excessive force when inserting solid tube or when attaching fitting barbs using Allen Key 9mm
- It is mandatory to chamfer the edges of cut solid tube to prevent o-ring damage. EK recommends a 0.5mm x 45° chamfer.
- This product should NOT be installed with any aluminum Fluid Gaming parts!
- The aesthetic rings are sold separately.
Model: TR-3831109813874-4P
Similar items with 4 stars and above
EKWB EK-DuraClear Soft Tubing, 10/16mm (3/8" ID, 5/8" OD), 3 Meter, Clear
EK-DuraClear is the most advanced liquid cooling tubing, designed and manufactured for the most demanding customers, who want to use soft tubing in their builds. The EK-DuraClear structure is formulated to enable it to perform in a wide range of closed loop cooling systems, making it the top choice for every liquid cooling enthusiast.
Our top priority during the development of this tube was the prevention of bacterial growth on the tubing wall. To eliminate this problem, EK-DuraClear has very smooth inner walls that prevent any kind of bacterial adhesion. Tested in the most extreme environments, the EK-DuraClear is guaranteed to withstand far worse conditions that would ever appear in the everyday use.
One of the most important features that the soft tube should have is the flexibility and good bend ratio without kinks. EK-DuraClear has one of the best bend ratios on the market. Doing a tight turn in your liquid cooling build has never been easier! Tighter bends without kinking will allow you to have no reduction in cooling performance whatsoever.
Unlike the matte black EK ZMT Tube, EK-DuraClear is a transparent tube, designed to be used with EK-Ekoolant cooling liquids. Colored liquid really gives your build a touch of personality and there is nothing more beautiful than matching colors of liquid with your hardware.
Features:
– Highly durable
– Transparent
– UV Resistant
– Logo Free (no print on tube)
– Inner Wall resilience
– Environmentally responsible, safe and non-toxic product
Technical Specifications:
– Material: PVC
– Color: Clear, not UV-reactive (resistant to UVA & UVB)
– Length: 3 meters
– Operating temperature range: -20°C to 80°C
Dimensions:
Internal diameter (ID): 9,5 mm (3/8″)
Outer diameter (OD): 15,9 mm (5/8″)
Model: 3831109850978
Thermaltake Pacific C360 Ddc Res/Pump 5V Motherboard Sync Copper Radiator PETG Hard Tube Water Cooling Kit CL-W243-CU12SW-A
- Analog/digital lighting Analog lighting allows a selection of 7 lighting effects with the included a RGB Controller. Connect lights to select 5V RGB Capable motherboards TO utilize digital lighting schemes from as US aura Sync, Gigabyte RGB FUSION, MSI Mystic Light Sync, and ASROCK polychrome Sync
- All included the C360 hard tube Kit contains a CPU water block, pump/reservoir, radiator, fans, fittings, tubing, and coolant, which are components necessary to complete a CPU water cooling loop
- Slim copper radiator the C360 is engineered with 12 copper flat tubes and 17 fins per Inch. This radiator’s 27mm thick design assures fitment compatibility with most form Factor chassis
- C pro fittings build like a Pro with a new take on compression fittings. Engineered with four Built in O rings to provide maximum leak prevention and a secured compression seal
- Exclusive components W4 a RGB Edition water block, T1000 pure Clear Coolant, and a new pr15 ddc pump/reservoir combo
- 2 years
Thermaltake Pacific C360 DDC hard tube Water cooling kit is designed for users who likes an efficient and high-quality Combo kit that is ready to sync with 5V RGB Capable motherboards from Asus, Gigabyte, MSI and as rock. The kit includes three pure 12 a RGB sync radiator fans, a Pacific W4 a RGB CPU water block, Pacific pr15-ddc pump/reservoir Combo, Pacific C360 radiator, a bottle of T1000 transparent coolant pure Clear, six C-Pro G14 PETG 16mm OD compressions, eight v-Tobler PETG tubes, an a RGB LED controller, and other accessories. p/N: cl-w243-cu12sw-adimension: 520 (L) x 200 (W) x 232 (h)compatibility: intel LGA 2066/2011/1366/1156/1155/1151/1150/775amd AM4/FM2/FM1/AM3+/AM3/AM2+/am2(cpu socket)components Dimension: copper radiator: 29. 5 (H) x 119 (W) x 399 (l) mm tube Dimension: od: 16mm, ID: 12mmfan spec: pwm 5001500 RPM, ( a RGB Controller or 5V MB a RGB sync )coolant: T1000 coolant pure clear kit contents: cpu water block – Pacific W4 a RGB CPU water block x1pump/reservoir- Pacific pr15-ddc pump/reservoir Combo x1copper radiator- Pacific C360 radiator 29. 5 (H) x 119 (W) x 399 (l) mm x1argb fan- pure 12 a RGB sync radiator fan TT Premium Edition x3- a RGB LED controller fittings – Pacific C-Pro G14 PETG 16mm OD compression – Black x6- Pacific G1/4 90 degree adapter – Black x2coolant- Thermaltake T1000 coolant pure Clear x1tube- V-Tobler PETG tube 16mm OD 500mm x 8accessory- Intel and AMD universal Back Plated & mounting kit- 24pin ATX bridge tool x1- Thermaltake thermal grease x1- silicone insert x1. Do not let the pump run dry, when there is no liquid entering the pump turn off your power immediately
Similar items with 4 stars and above
EKWB EK-HD PETG Insert, 12/16mm, 10-Pack
- The EK-HD PETG Inserts are EK’s way of battling against potential deformation hazards that the use of PETG tubes present
- Provide a safety measure for 16mm OD / 12mm ID PETG tubes which prevents the tube wall from collapsing inside the compression fitting
- Great option for PETG users who see water cooling temperatures of 40°C and above
- Material: Black ABS
- Includes 10 pieces
The EK-HD PETG Inserts are EK’s way of battling against potential hazards that the use of PETG tubes present.
PETG tubes are extremely popular because of the ease of use and their flexibility. On the other hand, PETG tubing is prone to deformation when exposed to high temperatures (40°C and above). The deformation rate depends on the duration and maximum temperature reached. These temperatures can be reached with pump failures, water block clogging, etc.
The EK-HD PETG Inserts provide a safety measure for 16mm OD / 12mm ID PETG tubes which prevents the tube wall from collapsing inside the compression fitting.
The EK-HD PETG Insert is low profile and it is not visible when in use with any of the EK hard tubing fittings.
Technical specifications:
– Material: Black ABS
Enclosed:
– EK-HD PETG Insert 12/16 (10pcs)
Model: 3831109815762
Conclusion
By our suggestions above, we hope that you can found ek water cooling petg tube fittings for you.Please don’t forget to share your experience by comment in this post. Thank you!
