homekitchenart 
Nowadays, there are so many products of attic cooling fan control switch in the market and you are wondering to choose a best one. You have searched for attic cooling fan control switch in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings attic cooling fan control switch which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
QuietCool AFG PRO-3.0 Attic Gable Fan Model
- Quiet Cool attic gable fans use an innovative integrated mounting tab system to make installation simple
- It moves up to 3X the amount of airflow of a traditional attic fan at up to 1. 6X better efficiency
- One speed, 250 watts
- 3013 cfm
- Includes thermostat
Quiet Cool advanced attic gable fans are the best in the industry. With the most energy efficient attic fan and the most powerful attic fan.
Iliving 12 Inch Variable Speed Shutter Exhaust Fan, Wall-Mounted, 12"
- 12 inch variable speed shutter exhaust fan with automatic Shutters
- UL listed with speed controllable, permanently lubricated motor
- Corrosion-resistant with OSHA compliant wire guards
- Variable speed functionality with the purchase of the iLIVING ILG8SFSC speed controller. Speed controller sold separately
- 120 Volts,1/20 HP,0.55 amp,1680 rpm,800 CFM ,variable speed functionality requires the purchase of the iLiving speed controller”
The iLIVING shutter exhaust fan is perfect for removing excess heat, moisture, and unpleasant odors from virtually any commercial location, including restaurants, factories, warehouses, barns, and greenhouses. This fan features aluminum blades, OSHA compliant wire guards, and automatic shutters that open and close in tandem with the operation of the fan. The completely enclosed motor is thermally protected and permanently lubricated. The fan comes fully assembled out of the box; only installation required is the electrical hardwire. The shutter fan comes in 8 different sizes: 10 inch, 12 inch, 16 inch, 18 inch, 20 inch, 24 inch, 30 inch, and 36 inch; the 18 inch shutter fan has both a variable Speed ILG8SF24V and a single Speed model. The iLIVING 30 inch and 36 inch shutter fans are only available in single Speed. For variable Speed models, the iLIVING ILG8SFSC Speed controller is sold separately.
AC Infinity CLOUDLINE T4, Quiet 4” Inline Duct Fan with Temperature Humidity Controller – Ventilation Exhaust Fan for Heating Cooling Booster, Grow Tents, Hydroponics
- Designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors.
- Intelligent controller with temperature and humidity programming, fan speed control, timer, and alarm system.
- Mixed flow design combined with a PWM-controlled DC-motor for a truly quiet and energy efficient performance.
- Kit also includes corded sensor probe, AC power plug, two duct clamps, and required mounting hardware.
- Duct Size: 4” | Dimensions: 6.9 x 11.9 x 7.4 in. | Airflow: 205 CFM | Noise: 28 dBA | Bearings: Dual Ball
Inline Duct Booster Fan
A smart inline duct fan designed to quietly ventilate hydroponic grow rooms, boost heating/cooling to rooms, circulate fresh air, exhaust projects, and cool AV closets. Featuring an inline mixed-flow design, the duct fan can maintain airflow even in high static pressure applications. Contains an DC-motor with PWM-control for a quiet and energy efficient performance. Includes an intelligent controller that features advanced programming and functions. Complete kit includes one duct fan unit, one thermal controller, one corded thermal probe, two duct clamps, installation manual, all necessary mounting hardware, and a corded AC plug adapter.
Intelligent Controller
The controller can be programmed to adjust fan speeds to respond to varying high and low temperatures, and humidity. For ventilation applications, the controller can be set to run continuously, or triggered to run at customizable speeds when given power, due to its backup memory capability. Additional features includes a countdown timer, alarm system, and eco-mode. Includes detachable 12-foot precision water-resistant probe.
Quiet and Energy Efficient Design
Unlike common duct fans that uses an AC-motor which are loud and unmanageable, this duct fan features an DC-motor that is controlled using PWM (Pulse Width Modulation). This technology enables motors to be able to run smoothly at extremely low RPM speeds without generating additional heat or noise. In addition, the duct fan uses a mixed flow design using a stator blade and dual hydrodynamic wind circles. This gives it a high static pressure rating, enabling it to deliver airflow even in applications where air movement is being restricted. The motor houses dual ball bearings rated at 67,000 hours which allows the duct fan unit to be mounted in any direction. The unit is IP44 rated to be highly resistant to dust and liquids, and performs well even in harsh environments.
AC Infinity CLOUDLINE T6, Quiet 6” Inline Duct Fan with Temperature Humidity Controller – Ventilation Exhaust Fan for Heating Cooling Booster, Grow Tents, Hydroponics
- Designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors.
- Intelligent controller with temperature and humidity programming, fan speed control, timer, and alarm system.
- Mixed flow design combined with a PWM-controlled DC-motor for a truly quiet and energy efficient performance.
- Kit also includes corded sensor probe, AC power plug, two duct clamps, and required mounting hardware.
- Duct Size: 6” | Dimensions: 7.9 x 12.6 x 8.4 in. | Airflow: 351 CFM | Noise: 32 dBA | Bearings: Dual Ball
Inline Duct Booster Fan
A smart inline duct fan designed to quietly ventilate hydroponic grow rooms, boost heating/cooling to rooms, circulate fresh air, exhaust projects, and cool AV closets. Featuring an inline mixed-flow design, the duct fan can maintain airflow even in high static pressure applications. Contains an DC-motor with PWM-control for a quiet and energy efficient performance. Includes an intelligent controller that features advanced programming and functions. Complete kit includes one duct fan unit, one thermal controller, one corded thermal probe, two duct clamps, installation manual, all necessary mounting hardware, and a corded AC plug adapter.
Intelligent Controller
The controller can be programmed to adjust fan speeds to respond to varying high and low temperatures, and humidity. For ventilation applications, the controller can be set to run continuously, or triggered to run at customizable speeds when given power, due to its backup memory capability. Additional features includes a countdown timer, alarm system, and eco-mode. Includes detachable 12-foot precision probe that is water resistant. Can connect to an additional CLOUDLINE S6 fan to share the same programming and power source.
Quiet and Energy Efficient Design
Features an DC-motor that is controlled using PWM (Pulse Width Modulation). This technology enables motors to be able to run smoothly at extremely low RPM speeds without generating additional heat or noise. In addition, the duct fan uses a mixed flow design using a stator blade and dual hydrodynamic wind circles. This gives it a high static pressure rating, enabling it to deliver airflow even in applications where air movement is being restricted. The motor houses dual ball bearings rated at 67,000 hours which allows the duct fan unit to be mounted in any direction. The unit is IP44 rated to be highly resistant to dust and liquids, and performs well even in harsh environments.
VES 24" Exhaust Shutter Fan, Wall Mount, 3 Speed
- This shutter/exhaust fan can help replace your ac unit by cooling your garage, attic, greenhouse shop or chicken coop.
- Can easily be added to a window opening or opening in the wall along with a thermostat to optimize cooling.
- This VES industrial grade shutter fan can solve all of your cooling and ventilation needs.
- These high velocity fans act as an air conditioner to remove hot air better than a ceiling fan.
These SF shutter exhaust fans have a totally enclosed motor and comes complete with built in speed switches and a 9′ cord. no electrician is required, just mount the fan in the wall and plug it into an approved receptacle. the corrosion resistant aluminum shutter comes complete with a tie bar to reduce shutter flapping and keep the shutters closed when the fan is not running. on the intake side of the fan the balanced aluminum blade is protected by a strong painted grill.
Features:
built in speed switch with 9′ cord attached
comes totally assembled out of the box
totally enclosed maintenance free motor
corrosion resistant aluminum shutter with tie bar to reduce shutter flapping and opening on windy days
safety painted grill on intake side meets osha standards
Motor features:
csa/csa-us approved
50/60 hz
f class insulated
follow nema standards either 48 or 56 frame
dupont nomex insulation
rotors have been balanced to reduce noise vibration and prolong life
motor enclosures have been machined to <0.5mm to reduce rotor shaft play
csa/csa-us for an ambient temperature of 40°c but will stand up to 65°c (149°f)
copper windings rated at h class
bearing specifications – 40°c to 140v c
capacitor rating 450vac, 10,000 hours for extended life
silicon steel rotors and stators
Applications:
designed for agricultural, horticultural,factories, warehouses, garages, attics and restaurants
remove and control unwanted condensation
exhaust obnoxious fumes
exhaust excessive heat
improve inside air quality
Ventamatic XXFIRESTAT 10-Amp Adjustable Programmable Thermostat with Firestat for Power Attic Ventilators, Replacement Thermostat
- FIRESTAT THERMOSTAT: The Ventamatic Firestat Thermostat controls power attic ventilators. The Firestat Temperature Range is 183°F at which point it cuts off the appliance.
- ADJUSTABLE THERMOSTAT: The Thermostat is adjustable by the use with a simple screw driver adjustment. It has adjustable bi-metallic switch.
- ENERGY EFFICIENT POWER ATTIC VENTILATOR: It provides energy-efficient operation of power attic ventilators and the temperature ranges from 50°F to 120°F.
- REPLACEMENT THERMOSTAT: This Ventamatic Replacement Thermostat controls power attic ventilators to promote the equalization of temperatures inside and outside your attic. Firestat safety feature shuts fan off at 183F Controls up to three units, not to exceed 10 amps.
- PROGRAMMABLE THERMOSTAT WARRANTY: This thermostat provides 10 years of warranty. It is of opening size 4.8 x 2.5 x 4.8 inches
Product Description
Specification: • Overall Dimension: 4.8 x 2.5 x 4.8 inches • Item Weight: 1 pound • Size: 10 • Color: White • Power Source: Corded-electric • Temperature: 50°F to 120°F • Voltage: 120 volt • Warranty: 10 Years This Ventamatic Replacement Thermostat controls power attic ventilators to promote the equalization of temperatures inside and outside your attic. Temperature Range F 183, Accessory Type Ventilation accessory. Firestat safety feature shuts fan off at 183F Controls up to three units, not to exceed 10 amps. It provides energy-efficient operation of power attic ventilators Temperature range from 50 degrees to 120 degrees Fahrenheit Temperature is fan On/Off 10-Amp adjustable thermostat Adjustable bi-metallic switch Product Description This Ventamatic Replacement Thermostat controls power attic ventilators to promote the equalization of temperatures inside and outside your attic. Temperature Range F 183, Accessory Type Ventilation accessory. Firestat safety feature shuts fan off at 183F Controls up to three units, not to exceed 10 amps. From the Manufacturer 10-Amp automatic adjustable thermostat with Firestat. For the energy efficient control of roof or gable power attic ventilators. Temperature range from 50 to 120 Degree Fahrenheit.
From the Manufacturer
10-Amp automatic adjustable thermostat with Firestat. For the energy efficient control of roof or gable power attic ventilators. Temperature range from 50 to 120 Degree Fahrenheit.
Attic Fan Thermostat, Attic Fan Control, Cooling Only, 120 to 240VAC
- Price For: Each Number of Switches: 1 Input Voltage: – Full Load Amps: – Full Load Amps @ 240VAC: 10A Item: Attic Fan Thermostat Inductive Amps @ 240V: 10A Full Load Amps @ 120V: 13.8A Locked Rotor Amps @ 120V: 82.8A Locked Rotor Amps @ 240V: 60A Switch Type: SPST Switch Action: Close on Rise Sensor Type: Bimetal Color: Beige/Silver Face
- Voltage Range: 120 to 240VAC Mounting: Standard 2″ x 4″ Vertical Box Depth: 2-1/8″ Inductive Amps @ 120V: 13.8A Application: Attic Fan Control, Cooling Only Differential: 15 Degrees F Width: 2-13/16″ Inductive Amps @ 208V: – Control Range: 80 Degrees to 130 Degrees F Includes: – Height: 4-9/16″ Country of Origin (subject to change): China
‘ Attic Fan Thermostat, Switch Type SPST, Switch Action Close on Rise, Number of Switches 1, Control Range 80 Degrees to 130 Degrees F, Differential 15 Degrees F, Height 4-9/16 In., Width 2-13/16 In., Depth 2-1/8 In., Sensor Type Bimetal, For Use With Attic Ventilators, Fans and Dampers, Color Beige/Silver Face, Application Attic Fan Control, Cooling Only, -, 120 to 240VAC, 13.8A, -, 10A, 13.8A, 10A, 82.8A, 60A, -, Standard 2 In. x 4 In. Vertical Box, Includes – ‘
Nashone Wireless Temperature Controller,Electric Thermostat with Remote Control Built in Temp Sensor 3 Prong Plug LCD Display Heating Cooling Mode(wirelss thermostat)
- REMOTE CONTROL.ON and OFF just need to click button. Control distance reach 40 meters with the sensor in open area and certified by FCC
- SMART TEMPERATURE MEASUREMENT. Built-in temperature sensor, ambient temperature detected automatically by remote controller, appliance stop to heat or cool after current temperature equal target temperature
- MULTIPLE SAFETY PROTECTION.3-Prong socket with grounded terminal, recoverable overload short circuit and Max load current up to 15A.Supply security alarms in unattended operation
- EASY TO READ AND INSTALL. Accurate reading for LCD display with back light. Wall mounted or table stand, user-friendly installation
- WHAT YOU WILL GET.Wireless thermostat outlet, remote control, user manual, 18 month warranty for quality-related issues and 45 days money back guarantee
Intermatic FD12HHW 12-Hour Spring-Loaded In-Wall Timer Switch for Auto-Off control of Fans and Lights with Hold, White
Product Description
DECORATOR TYPE; 1-3/4 INCH W X 1-1/4 INCH D X 4-1/8 INCH H SIZE; WHITE COLOR; WITH HOLD OPERATION TYPE; UL (CANADA AND US), CSA (CANADA AND US) APPROVAL; FAN, LIGHTING, MOTOR, HEATER APPLICATION; WALL MOUNTING; 32 TO 104 DEG F OPERATING TEMPERATURE
From the Manufacturer
These energy saving timers use no electricity to operate. These timers are designed to replace any standard wall switch, single or multi-gang, and automatically limit the “ON” time of fans, lights, motors, heaters and other energy consuming loads. The “hold feature” allows the user to override the automatic shut-off function for extended use of the load as required. Supplied with a molded white time dial plate designed to fit either toggle or decorator style switch plates; single or multi-gang with no field modifications required to fit either style switch plate. Time saving “up front” terminal connection with teeter type terminals and an easy “press-on” knob design ensure quick and easy installation.
Similar items with 4 stars and above
Control, Ceiling Fan, Variable Speed, 5 Amp, up to 3 Fans Forward/reverse
- SPEED: Comes with a variable speed dial that allows for an unlimited amount of speeds to find your ideal cooling and air circulation speed.
- OUTPUT: This VES controller has a max of 5 Amps and 120 volts. It can also control up to 3 VES ceiling fans.
- INCLUDES: Comes with the faceplate, controller, knob and hardware.
- APPLICATIONS: You can use this control with your VES industrial ceiling fan in your garage, shop, attic or patio.
- CONNECTION: This controller has a 4-wire connection. Please verify your ceiling fan wiring prior to ordering.
We have a full range of variable speed controls designed for both downdraft and forward/reverse applications. Please note that this control is 4 wire. Please verify your ceiling fan wiring prior to ordering. All controls have a minimum speed adjustment so you can set the ideal speed based on your application and ceiling height. Our controls are packaged with knobs, cover plate and hardware to attach to standard electrical boxes. When installing the control, please turn off the electrical power source as the control cannot be installed to an active grid.
Control is designed to work with VES ceiling fans.
Shipping time for deliveries in North America: 5-7 business days. Signature upon delivery is required for orders shipped to freight forwarders as well as orders exceeding $500.
Similar items with 4 stars and above
Conclusion
By our suggestions above, we hope that you can found attic cooling fan control switch for you.Please don’t forget to share your experience by comment in this post. Thank you!
