homekitchenart 
Nowadays, there are so many products of cooling fan for car amplifier in the market and you are wondering to choose a best one. You have searched for cooling fan for car amplifier in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings cooling fan for car amplifier which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
Xscorpion TF8 8-Inch Cross Flow 12-Volt Cooling Fan with Mounting Tabs
- 8-inch Cross Flow Cooling Fan
- Compatible with all 12-volt systems
- Comes equipped with mounting tabs for simple installation
- Low profile cross flow design provides generous air flow
- Lightweight and compact design allows installation in tight fitting spaces
8-Inch Cross Flow 12-Volt Cooling Fan with Mounting Tabs
Sunon 70x70x15mm KDE1207PHV3 2Pin/2Wire 12v Low Speed Fan (4 pack)
Sunon Model KDE1207PHV3 (4 pack)
Bearing Type:Vapo
Operating Temp: -10-70C
Frame Material: Thermoplastic
Specifications (per fan):
Size 70x70x15mm
Connector: 2Pin/2 Wire w/3 inch tail
Rated Voltage (V): 12
Operating Voltage Range (V): 8~13.8 V DC
Rated Current (Amp): 0.54
Rated Speed (rpm): 2300
Maximum air Flow: 19.1 CFM
Sound LeveldB(A): 21.5
RoHS
Life Expectancy: 40,000 hours
Pair Packed 3 Inch 12VDC 12 Volt Car Truck Cooling Fans
AC Infinity MULTIFAN S5, Quiet Dual 80mm USB Fan for Receiver DVR Playstation Xbox Computer Cabinet Cooling
- Ultra-quiet USB fans designed to cool various electronics and components.
- Features a multi-speed controller to set the fan’s speed to optimal noise and airflow levels.
- Dual-ball bearings have a lifespan of 67,000 hours and allows the fans to be laid flat or stand upright.
- USB plug can power the fan through USB ports found behind popular AV electronics and game consoles.
- Dimensions: 3.2 x 3.2 x 1 in. per fan | Total Airflow: 52 CFM | Total Noise: 18 dBA | Bearings: Dual Ball
Product Description
The ultra-quiet cooling fans can be positioned to stand upright or laid flat to cool various electronics and components. Features a multi-speed controller with power switch. Includes eight large anti-vibration rubber feet per fan and a 6-foot power cord. The USB plug can be plugged into the USB ports found behind popular electronics such as receivers and video game consoles. The two fans are permanently connected by a 2.5 feet cord and share the same multi-speed controller. Each unit contains an additional USB port, up to four fans can be daisy chained together to share the same power source. Certified by CE and RoHS.
Speed Controller
The fan includes an in-line multi-speed controller with power switch to set the fan’s speed to optimal noise and airflow levels for various environments.
Connecting Additional Units
For electronics and components that requires more airflow, each fan unit can daisy chain additional MULTIFAN S series fans. Up to four fans can share the same USB power source; and up to six fans can share the same thermal controller (sold separately). MULTIFAN S1, S2, S3 and S4 contains one fan, and MULTIFAN S5 and S7 contains two fans.
Applications
This ultra-quiet cooling fan is popular in a variety of electronics and components such as receivers, DVRs, video game consoles, modems, computers, amplifiers, and other audio video equipment.
Stinger SGJ78 8.25-Inch Cross-Flow Fan
8-1/4″ Cross flow cooling fan
Alagoo 12V 6”Car Cooling Fan Automobile Vehicle Clip Fan Powerful Quiet Ventilation Electric Car Fans with Adjustable Clip & Cigarette Lighter Plug for Car/Vehicle
- 【Big Clamp Design】- This car vehicle cooling fan is designed with a big adjustable clamp, suitable for mounting on car and vehicle. The mouth of the clip can up to 2 inches(5cm).
- 【Rotatable】- High efficient fan rotating, remove the smell quickly and effectively because of the rotation powerful fans.
- 【Quiet & 2.5m Cord】- Strong wind but low noise. Come with 2.5m cigarette lighter plug power cable which makes the fan extremely convenient, feeling cool for your Baby, Guests or Pet Dog at back seat.
- 【Low Energy Consumption】- Low energy consumption, low noise but strong wind and the big clip to secure the fan to firmly fix in the car. 12V powered portable car fan, adjustable direction fan, blow hot air out to the car and vehicle.
- 【Multiple Application】- Excellent Car Ventilation Fan Choice with Kids Safe Design. Fits to all family car, small compact medium or large full size Sedan Van Truck SUV RV ATV boat with 12V cigarette lighter socket (Not for 24V Trucks).
Product Introduction:
Great Alagoo Car Cooling Fan. Perfect for keeping your Car Sedan Van Truck SUV RV ATV Boat fresh, removing the smell and cooling your babies, pets, passengers and driver. It is a good option for summer cooling, with a long vehicle power cord (180cm). Any puzzle about it, please fell free to contact us.
Specification： *Voltage: DC 12V
*Power: 9W *Noise Level: <50db>
*Fan Diameter: 15 cm (6inches) *Cord Length: 2.5m(8.2ft)
*Gross Weight: 0.48kg *Installation Site: visor, skylight, door handles, outlet,rearview mirror,etc
Operating instructions: 1.Choose the right place to clip.
2.Keeping the switch off or turn to “0”. 3.Starting car, plug in the cigarette lighter.
4.To connect the fan and clip, adjusting appropriate angel of fan, tighten the swivel nut, turn on the switch. 5.After using it, turn off the switch, and pull out cigarette lighter.
Cleaning and maintenance: Before cleaning, please cut off power firstly
Use wet cloth clean the exterior Do not use containing mineral bubble to clean, avoid scratching
Package Lists: 1 x Alagoo 12V 6 inch Auto Clip Car Fan
1 x Clip 1 x Swivel
1 x English Manual
Welcome to choose Alagoo 12V 6”Car Cooling Fan! If you have any puzzle about the item, welcome to contact the seller support. We are waiting here to help you. Thanks a lot and best wishes.
Bass Rockers Large Powerful 5" 120mm 12V Square Cooling Fan for Car Amplifier, Audio/Video Receiver, Mixer, Media Player, Computer, Server/PC. DIY Thermal Amp Airflow Solution 12 Volt
Large Powerful 120mm 12V Cooling Fan (0.56A), Durable Polycarbonate Housing.
DIY Thermal Solution for the heat-generating electronics in car, home or office. Cool down and protect your expensive equipment, such as amplifiers, video/audio receivers, media players, routers, etc., by adding increased airflow with this powerful 12 Volt fan.
Measured Dimensions:
Overall Width / Height: 4-5/8″ (118mm)
Overall Thickness: 1-1/2″ (38mm)
Overall Diagonal: 6-3/8″ (162mm)
Distance Between Holes: 4-1/8 (105mm)
Diagonal Distance Between Holes : 5-7/8 (148mm)
Receiver or Amplifier Cooling Fans with thermoswitch & Multi-Speed Fan Control
- These two high-quality, super low noise 80mm fan units are designed sit on your component’s top air vents. Each fan has a special raised air-chamber base, which covers nearly twice the area of a standard fan. A vortex of air is pulled out of the top of your component over the full area of these raised bases.
- The cooling system includes a thermoswitch module, which turns the fans on at approximately 82 degrees Fahrenheit. Just place the thermoswitch heat collector over a warm spot on top of your component’s air vents, and it will do the rest.
- You control the speed of the fans, with the multi-speed power controller. Even at medium speeds settings, the fans will replace a volume of air equal to that of most components several times per minute.
- Recommended fan speeds for this system: The two fans (running together) are rated at 13db while moving 31 cubic feet of air per minute at 1/2 speed, or 16db & 41CFM at 2/3 speed. With component cooling, slow (and quiet) are the way to go! Other available speeds: 1/4 speed = 10db/16CFM, 3/4 speed = 19db/46CFM, full speed = 22db/62CFM.
- Each fan unit is 4-3/4″ square, 1-1/2″ tall (including the top grill and air-chamber base), and only requires 3/8″ of space above the fans for air flow.
OVERVIEW:
This cooling system has two high-quality, low-noise 80mm fans, with long-lasting and quiet Fluid Dynamic bearings.
It includes a thermoswitch module, which turns the fans on at approximately 82F. The thermal sensor’s air-collection cup gathers hot air as it rises, to get an accurate measurement of the temperatures inside your component.
Each fan unit has a specially-constructed raised air-chamber base that enlarges the area of air flow, while also sealing air and preventing vibrations. The air-chamber base covers twice the area of a standard fan.
The system has a multi-speed power transformer, which plugs into an AC outlet. You control the speed of the fan, using this transformer, which can be set to any one of 5 different speeds.
THE COOLING SYSTEM INCLUDES: 1 x dual-80mm (two fans) component fan unit, 1 x thermoswitch module, 1 x multi-speed power transformer, and printed installation instructions. All cooling system parts connect together using special heavy-duty Molex quick-connect plugs, which allows the parts to be separated for easy wire-routing.
SETUP: The system comes completely assembled, with all components installed, wired and ready to go! Just plug the power transformer into an AC outlet, and drop the fans and sensor on top of your receiver’s top air vents.
GUARANTEE: Your satisfaction is guaranteed. You can return the system for any reason within 30 days — just contact me (through Amazon) and I will send you a prepaid shipping label. Since starting in 2005, AV Cabinet Cooling has sold over 10,000 cooling systems, and we are dedicated to great customer service.
WARRANTY: Your purchase is also covered by a 12 month parts & labor warranty.
Receiver or Amplifier Megabase 12 Volt Trigger-Controlled Cooling Fans (12v), with multispeed Control, for Home Theater
- This super low-noise dual-120mm fan unit is designed to sit on your receiver’s top air vents. It has a special raised air-chamber base, which covers 145 square inches, and air is drawn out over the entire area of this raised base.
- The system includes a 12 volt trigger control module, which turns the fan on and off, under the control of your component’s 12v trigger socket. The 12v module controls the power from the cooling system’s multi-speed transformer, directing it to the fans when it detects a 12v signal. In addition, you control the speed of the fans, with the multi-speed power controller.
- IMPORTANT: Some receivers have a non-standard setup, where the receiver doesn’t directly control the trigger (for example, the trigger might be under the control of Zones 2 or 3, etc.). Please consult your receiver’s manual for details about how its 12v trigger operates, or contact me if you have questions.
- Recommended fan speeds for this system: The fans (running together) are rated at 13db while moving 50 cubic feet of air per minute at 1/3 speed, or 16db & 72CFM at 1/2 speed. With component cooling, slow (and quiet) are the way to go! Other available speeds: 2/3 speed = 19db/98CFM, 3/4 speed = 22db/110CFM, full speed = 25db/148CFM.
- The Megabase cooling unit measures 14.5″ wide, and 10″ deep. It is 1-1/2″ tall, and only requires about 1/4 inch of additional space above for airflow.
OVERVIEW: This cooling system has two high-quality, low-noise 120mm fans, with long-lasting and quiet fluid dynamic bearings.
It includes a 12 volt trigger control module, which turns the fan on and off, under the control of your receiver’s 12v trigger socket. The module detects the 12v signal, then sends the power from the cooling sysem’s transformer to the fans.
The fan unit has a specially-constructed raised air-chamber base that enlarges the area of airflow, while also sealing air and preventing vibrations. This base covers over 145 square inches. Please make sure that the top of your component has a flat area on top that is at least 14.5″ x 10″. Don’t worry if your air vents are smaller (or larger) than the air-chamber base — it will work with any size vents.
THE COOLING SYSTEM INCLUDES: 1 x dual-120mm (2 fans) Megabase fan unit, 1 x 12v trigger control module, 1 x 5 speed power transformer, and printed installation instructions. All cooling system parts connect together using special heavy-duty Molex quick-connect plugs, which allows the parts to be separated for easy wire-routing.
SETUP: The system comes completely assembled, with all components installed, wired and ready to go! Just plug the power transformer into an AC outlet, and drop the fan unit on top of your receiver’s top air vents.
GUARANTEE: Your satisfaction is guaranteed. You can return the system for any reason within 30 days — just contact me (through Amazon) and I will send you a prepaid return shipping label. Since starting in 2005, AV Cabinet Cooling has sold over 10,000 cooling systems, and we are dedicated to great customer service.
WARRANTY: Your purchase is also covered by a 12 month parts & labor warranty.
Conclusion
By our suggestions above, we hope that you can found cooling fan for car amplifier for you.Please don’t forget to share your experience by comment in this post. Thank you!
