homekitchenart 
Nowadays, there are so many products of dc heating probe in the market and you are wondering to choose a best one. You have searched for dc heating probe in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings dc heating probe which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
DZS Elec Temperature Controller -50 to 110 Celsius (-58 to 230 F) DC 12V Programmable Heating/Cooling Thermostat Control Switch Module NTC Waterproof Sensor Probe Dual Color LED Display Monitor
- Temperature controller monitoring instrument, show the measured temperature (red) and set temperature (blue) at the same time. Can be used for cooling/heating control. Operating Voltage: DC12V 200mA
- Measurement Range: -50 to 110 Celsius (-58 to 230 F), the C/F button allows you to switch between Celsius and Fahrenheit temperatures
- Clear Working State: the relay is closed when the light is on, and the relay is disconnected when the light is off. It has high temperature protection.
- With a waterproof NTC (10K 0.5%) temperature sensor probe, rogrammable heating/cooling mode, delay start, high temperature alarm, Celsius/Fahrenheit mode, etc.
- Can be used for fish tank water temperature control, incubation field, equipment cabinet, air conditioning system, temperature control protection, control cabinet cooling system and other DIY temperature control systems.
Product Description:
Product Name: Programmable Dual LED Display Temperature Controller
Operating Voltage: DC12V 200mA
Measurement Range: -50 to 110 Celsius (-58 to 230 F)
Elaboration Precision: +/-0.1 Celsius
Control Precision: 0.1 Celsius
Backlash Precision: 0.1 Celsius
Refresh Rate: 0.5s
High Temperature Protection: 0 to 60 Celsius (32 to 230 F)
Temperature Sensor Type: 10K 0.5% NTC
Operating Temperature: -10 to 60 Celsius (14 to 140 F)
Compatible Load: 5A / 15A 220VAC; 20A 14VDC
Power Consumption: Less than and equal to 35mA (Static), Less than and equal to 65mA (relay closure)
Module Size: 48x29x32mm / 1.89×1.14×1.26 inch (LxWxH)
Temperature Setting:
Press STC key and the LED will flash. Press STC (+) and C/F (-) key to reach the set temperature value, wait for 3s, and the module will automatically save the parameters and exit.
Indicator:
Lights on, relay closed; Lights out, relay disconnected.
LED Display:
Red: Measuring Temperature; Blue: Setting Temperature
LL: Means the sensor is open
HH: Indicates that the temperature exceeds the measurement range of the module
–: Indicates that the module is under high temperature protection
Programmable Thermostat Introductions (Code, Explain, Setting range, Factory setting):
P0, Heating/Cooling, H/C, C
P1, Return difference, 0.1-30, 2
P2, Set limit maximum, +110, 110
P3, Set limit minimun, -50, -50
P4, Temperature correction, -15 – +15, 0
P5, Delay start, 0-10, 0
P6, High temperature alarm, -50 – +110, OFF
P7, Celsius/Fahrenheit, CS/FH, CS
P8, Factory reset, ON-OFF, OFF
Package Content:
1pc Temperature monitoring controller
1pc operating manual
PEMENOL Temperature Controller DC 12V Heating/Cooling Thermostat Control Switch Module -20℃ to + 100℃ Celsius Temp Display Board with Dual Relay Waterproof Sensor Probe for Brewing Ferment Greenhouse
- 【Dual Relay Output】2 10A relay keep the temperature within the set range through the heating and cooling thermostat
- 【Large Measurement Range】 Temperature range: -20°C~+100℃
- Input power: 12V
- Temperature measurement accuracy: 1 ℃
- Refresh rate: about 0.5s
- 【Clear Working State】 The relay is closed when the light is on, disconnected when the light is off. It has high temperature protection.
- 【NTC Temperature Sensor】 With a waterproof NTC (10K) temperature sensor probe, programmable heating/cooling mode.
- 【Widely Used】Can be used for fish tank water temperature control, incubation field, equipment cabinet, air conditioning system, temperature control protection, control cabinet cooling system and other DIY temperature control systems.
SMAKN W1302 12V AC/DC Digital Heating Thermostat Temp Control -50-110 °c Temperature Controller With 1 Meter Sensor Probe Cable
Inkbird All-Purpose Digital Temperature Controller Fahrenheit &Centigrade Thermostat w Sensor 2 Relays ITC-1000
Dorhea STC-1000 10A DC 12V Digital LED Temperature Controller Cooling Heating Centigrade Thermostat 2 Relays LED Output with NTC Sensor Probe(12V)
- 100% brand new and high quality
- Mini and light weight design
- large and clear LCD display.
- Auto converts cooling and heating modes to keep your equipment in an ideal temperature range.Have 2 relays .Switch between cooling and heating modes. Support celsius display.
- Wide temperature range (-50-99 °C)
- dual heating and cooling function.
- Widely use — seedling heat mat, home brewing, aquarium, pet breeding, incubation, BBQ, fermentation, accelerating germination, electric radiator, electric oven, etc.
- Refrigerating control output delay protection
- With compressor delay protection function for refrigerating control.
Resolution: 0.1 °C; Accuracy: ± 1 °C (-50 ° C ~ 70 ° C)
Power Supply: 12 V Power Consumption: <>
Operating Relative Humidity: 20% ~ 85% (No condensate)
Compressor Delay Protection Time: 1 ~ 10 minutes (adjustable)
Cable Length: 1 M
Sensor: NTC Sensor
Sensor Error Delay: 1 minute
Operating Temperature: 0 ° C ~ 60 ° C°
Storage Temperature: 30 ° C ~ 75 ° C
Temperature Measuring Range : -50 ° C ~ 99 ° C(adjustable)
Package Included:
1x Digital Temperature controller 12V
1 x Temperature sensor
XH W1219 Temperature Controller Module, 2PCS Double LED Display DC 12V Digital Cooling/Heating Thermostat with Waterproof NTC Probe Dual (Red Green)
- ❃❃ Temperature Measurement Range: -50~110℃. Control Precision: 0.1 celsius.
- ❃❃ Electronic digital thermostat with double 3-digit LED display, extremely bright and red. Operation both in heating and cooling to easily control equipment and devices.
- ❃❃ The output is electronically controlled by a microprocessor, to guarantee the utmost precision of intervention and an excellent resolution of reading temperature.
- ❃❃ The NTC probe is waterproof and allows to control the temperature even of fluids, allowing the controlled heated or cooling.
- ❃❃ The XH-W1219 thermostat module with its STM8S µC and I/O (sensor input, keys, double display, relay) can be re-programmed for automation tasks, e.g. timing, control, or counting.
Specification:
Model: XH-W1219
Power Supply: DC12V
Relay Current: 50mA
Control Range: -50~110 celsius
Control Precision: 0.1 celsius
Measuring Input: NTC10K waterproof sensor L=0.5m
High Temperature Alarm: -49~110 celsius
Input Voltage: DC 12V
Output Type: relay output 10A (max)
Return Difference Setting: 0.1~30 celsius
Delay Starting: 0-10min
Temperature Calibration: -10~10 celsius
Size: 60*43*16mm
P0: Temperature Control Mode(Cooling/Heating): when first use this product, if it is used to heating, please set H, if used to cooling, please set C.
P1: Return Difference Setting(0.1~30 celsius): long press SET key entering into the internal setting, choose P1 setting; then press SET key to achieve return difference value setting
P2: Temperature Calibration: this function is for temperature calibration. If the detection temperature and the actual temperature is different, then users can apply this function to calibrate
P3: Delay Start Time(0~10 minutes): this function is for compressor cooling
P4: Set High-Temperature Alarm Value(-50~110 Celsius): when the actual temperature is higher than this value, the screen will flash and sound an alarm
Restore Factory Settings: While power is on, press and hold the + – button for 3 seconds
Package included:
2 x DC12V Relay Module Dual LED Display Cycle Relay Module
2 x Waterproof NTC sensor
KeeYees Digital LED Temperature Controller Module – XH-W3001 Thermostat Switch with Waterproof Sensor Insulated Probe DC 220V Programmable Heating Cooling Thermostat
- 【High brightness digital display】3-digit display with high brightness, highly recognizable and practical.
- 【With wide voltage Stabilizer】The product includes a transformer switching power supply. Wide voltage 110V-220V. Not only that, the input and output lines are bold. Higher security and stable!
- 【Heating / Cooling Work Mode】Heating: Startup Temperature＜ Desired Temperature
- Cooling: Startup Temperature＞Desired Temperature. Range from -50℃ to 110℃. Temperature control precision is 0.1℃.
- 【Waterproof Insulated Probe】With 1M NTC10K waterproof probe is equipped for convenient usage. Probe used stainless steel material, waterproof and does not rust easily.
- 【Wide range of use scenarios】Widely used in the hatching area, incubation, equipment case, air conditioning system, temperature control protection, cabinet cooling system and other fields.
Product parameters:
– Product model: XH-W3001
– Temperature range: -50~110°C
– Temperature control range: -50~110°C
– Temperature measurement accuracy: ±0.2 °C
– Temperature control accuracy: ±0.1 °C
– Temperature input: NTC10K 1M waterproof Probe
– Input power: 110~220V
– Output power: 1500W
– Output capacity: up to 10A
– Mounting hole distance: 73mm (Aperture 4mm)
– Size: 60*45*31mm
Package Included:
1 x 220V Temperature Controller
Diymore Digital Temperature Controller STC-1000 DC 12V-72V All-Purpose Heating Cooling Thermostat LED Display 2 Relays Output with NTC Sensor Probe
- Mini and light weight design
- large and clear LED display.
- Automatic over temperature alarm
- temperature calibration.
- Wide temperature range (-50-99 °C)
- dual heating and cooling function.
- Control temperature by setting the temperature set value and the different value.
- Refrigerating control output delay protection
- wiring diagram for installation included.
Specification:
Line length: 1m
Product Model: STC1000
Size:75mm*85mm*35mm
Supply Voltage: DC 12~72V
Temperature Range: -50°C~+99°C
Temperature Measurement Accuracy: ±1°C(In the range of -50~+70°C)
Heating and Cooling Mode Setting:
Case1: Control Water Heater
Heating to 65° to stop, the temperature drops back to 50° and heating again.
Step1: Heating mode,Starting Temperature＜Stop Temperature.
Step2: Press and hold the▲button 3 seconds to Start Temperature value flashing. Use▲▼ to set the Starting Temperature to 50°C.
Step3: Press and hold the▼button 3 seconds to Stop Temperature value flashing. Use▲▼ to set the Stop Temperature to 65°C and the setting is completed.
The button does not operate for 5 seconds and automatically returns to the normal display state.
Case2: Control Farm Fan
The fan is ventilated to 26° to stop, the temperature is raised to 30° and the ventilation is started again.
Step1:Cooling mode, Starting Temperature＞Stop Temperature.
Step2: Press and hold the▲button 3 seconds to Start Temperature value flashing. Use▲▼ to set the Starting Temperature to 30°C.
Step3: Press and hold the▼button 3 seconds to Stop Temperature value flashing. Use▲▼ to set the Stop Temperature to 26°C and the setting is completed.
The button does not operate for 5 seconds and automatically returns to the normal display state.
Package Included:
1 x STC-1000 Digital DC12-72V All-Purpose Temperature Controller Thermostat with Probe
DZS Elec 3pcs XH-W1209 Micro Temperature Controller Switch DC 12V LED Digital Heating/Cooling Temp Thermostat Relay Module -50 to 110 Degree 10A with Waterproof Sensor Probe
- Compact Size: 48.5x40mm, light weight, convenient to use, easy to install.
- Wide Temperature Control Range: -50 to 110 degree Celsius, High Precision: 0.1 Degree Celsius.
- Use the waterproof sensitive NTC (10K 0.5%) sensor probe as the measurement input.
- Power Supply: DC 12V, low power consumption, Quiescent Current: Less than 35mA, attract current less than 65mA
- Equipped with 0.28″ 3-bit LED nixie tube, bright red color digital display, clear, easy to read.
Product Name: Microcomputer Temperature Control Switch
Product Model: XH-W1209
Product Size: 48.5x40mm
Control Mode: Heating/Cooling
Temperature Range: -50 to 110 Degree Celsius
High Temperature Protection: 0-110 Degree Celsius
Power Voltage: DC 12V
Quiescent Current: Less than 35mA, attract current less than 65mA
Temperature Probe: NTC (10K 0.5%) Water-Proof Sensor
Output: 1 Channel Relay Output, Capacity 10A
Environmental Requirement: -10 to 60 Degree Celsius, Humidity 20% – 85%
Operating Instruction:
1. Connect the power supply and load, displayed the real-time temperature, long press SET 5s to enter main menu.
2. Press SET again to enter P0(working mode) setting, press + – to select H (heating);
3. Press SET back to main menu, press + to set hystersis up to 10, press + to P1 (hystersis) setting;
4. Press SET back to main menu, long press SET to confirm if there is no other special requirements;
5. If need P0-P6 setting, press SET to enter setting, and press + – to set value similar to the above operation, long press SET to confirm after completing.
Attention: When the real-time temperature is below 40 Degree , heater starts to work, when heated to 50 Degree, heater stop working. The hystersis between 50 to 40 Degree is 1.
Package Included:
3x W1209 DC 12V Digital Temperature Controller Switch
Conclusion
By our suggestions above, we hope that you can found dc heating probe for you.Please don’t forget to share your experience by comment in this post. Thank you!
