Which Is The Best Gpu Cooling Kit
Nowadays, there are so many products of gpu cooling kit in the market and you are wondering to choose a best one. You have searched for gpu cooling kit in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings gpu cooling kit which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
NZXT Kraken G12 – GPU Mounting Kit for Kraken X Series AIO – Enhanced GPU Cooling – AMD & NVIDIA GPU Compatible – White
- ENHANCE YOUR GPU COOLING: With a 40% increase in cooling capacity compared to stock cooling, you’ll maximize your GPU clock speeds for higher performance and better frame rates
- COMPREHENSIVE COMPATIBILITY: Supports both reference and non-reference design AMD and NVIDIA GPUs, for more than 30 liquid coolers, including aftermarket VRM heatsinks
- ACTIVE COOLING FOR VRM: Comes with a 92mm fan, providing active cooling for the VRM and memory on the graphics card
- EASY INSTALLATION: Designed for a fast and easy installation, you can now lay the graphic card flat as you install the Kraken G12
- SUPPORTS: Kraken X42/X52/X62/72 Liquid Coolers
Quickly mount any Kraken Series liquid cooler onto graphics cards with the Kraken G12 mounting kit. It delivers a 40% increase in cooling capacity over stock cooling, and features a newly designed bracket with an easier installation process versus the Kraken G10. Plus, the G12 is compatible with more than 30 liquid coolers on the market.
Compatibility – Graphic Cards
Nvidia
Titan X, Titan, Geforce GTX 1080 Ti, 1080, 1070, 1060, 980 Ti, 980, 970, 960, 780 Ti, 780, 770, 760, 680, 670, 660Ti, 660, 580, 570
\AMD
RX 480, 470, R9 390X*, 390*, 380X*, 380, 290X*, 290*, 285*, 280X*, 280*, 270X, 270, R7 370, HD7970*, 7950*, 7870, 7850, 6970, 6950, 6870, 6850, 6790, 6770, 5870, 5850, 5830
* Some variations in AMD die height may require the use of a copper shim which is not included.
Compatibility – AIO Liquid Coolers
NZXT
Kraken X72, X62, X52, X42, X61, X41, X31, X60, X40
Corsair
H105, H110, H90, H75, H55, H50 (CW-906006-WW only)
Thermaltake
Water 3.0 Riing RGB 360, 280, 240, Red 280, 140,
Water 3.0 Ultimate, Extreme S, Extreme, Pro, Performer
Water 2.0 Extreme, Pro, Performer
Antec
KUHLER H2O 920V4, 620V4, 920, 620
Zalman
LQ-320, LQ-315, LQ-310
ARCTIC Accelero Xtreme IV – High-End Graphics Card Cooler with Backside Cooler for Efficient RAM and VRM-Cooling
- 300 Watt Cooling Performance – Three silent 92 mm PWM Fans, 84 Aluminum fins, 5 Heat pipes pre applied MX 4 Thermal Compound
- New Fan Controller – For a smooth operation with both NVIDIA and AMD graphics cards
- Nvidia GeForce: GTX 980, 970, Titan X, Titan (Black), 780 (Ti), 770, 760, 750 (Ti), 680, 670, 660 (Ti), 650 (Ti,Ti boost), … For More Information, Visit http://ax4.arctic.ac
- Including Back Side Cooler for improved VR- and RAM- Cooling
- AMD Radeon: R9 290(X), 285, 280(X), 270(X), R7 265, HD 8870, 7870(XT, GHz), 7850, 6970, 6950, 6870, 6850, 6790, 5870, 5850, 5830
About ARCTIC
ARCTIC is a leading manufacturer of silent PC coolers and components and has initiated and sustainably influenced the trend towards quiet cooling systems. Besides a wide range of CPU and GPU coolers, ARCTIC offers high quality monitor mounts as well as an audio product line. The company, run by founder Magnus Huber, has locations in Germany, Hong Kong and the USA and convinces pc enthusiasts in over 45 countries with innovative and user-friendly products, high quality and fair prices. For more than 15 years ARCTIC stands for comfortable computing, excellent service and personal support. About ARCTIC
ARCTIC is a leading manufacturer of silent PC coolers and components and has initiated and sustainably influenced the trend towards quiet cooling systems. Besides a wide range of CPU and GPU coolers, ARCTIC offers high quality monitor mounts as well as an audio product line. The company, run by founder Magnus Huber, has locations in Germany, Hong Kong and the USA and convinces pc enthusiasts in over 45 countries with innovative and user-friendly products, high quality and fair prices. For more than 15 years ARCTIC stands for comfortable computing, excellent service and personal support.
Bewinner DIY 240mm Water Cooling Kit, DIY 240mm Cooler CPU/GPU Block Pump Reservoir with LED Fan Heat Sink Computer Water Cooling Connectors Kit, All-in-one Liquid CPU Cooler Kit
- 【Professional Water Cooling Kit】All included:240mm heat sink+CPU/GPU cooling Block+2pcs LED fans+water pump with shock pad+Cylindrical Water Reservoir+Transparent Hose+A Set of Water Pipe Connectors.
- 【Super Water Circulation Cooling System】18 Pipe Aluminum Heat Exchanger Radiator,9W 600L / H Waterproof G1/4 Thread size High quiet water Pump,160mm High capacity Cylindrical Water Reservoir make the circulation system clear and visible,The extreme performance dual LED fans offer a high air static pressure.
- 【Universal Water Cooling Block】The CPU water cooling block made of copper and transparent plexiglass suitable for INTEL / AMD Dual Platform,the 0.8MM parallel waterway G1/4 universal thread GPU water cooling block made of copper and POM high temperature materials support 9.5mm ID / 12.7mm OD PU tube,or 10mmID/16mmOD solid tube,or 8mmID/12mmOD silicon tube.
- 【Complete Accessories】A Set of Water pipe joints & hose clamp & plug and a Inner diameter 8mm/Outer diameter 12mmTransparent hose,So you don’t have to worry about installation at all.
- 【100% Satisfaction Guarantee】 If you have questions about the product or are not satisfied with it, please contact us at any time, we will provide you with a best solution. Your satisfaction is our main concern.
Description:
This all-in-one liquid CPU cooler kit provides a 240mm heat sink, water pump, cylindrical water reservoir, dual fans, as well as installation accessories, which will dramatically improve heat dissipation experience, especially in terms of stability, silence, efficiency, and convenience. Liquid cooling simply works better than air cooling and the special design makes it easy for you to protect your valuable CPU.
Specifications:
1. 240mm black heat sink (with screw pack):
Appearance size: 27.5 * 11.8 * 3.2cm
Straight mouth height: 2cm
Diameter of straight tube: about 9.5 mm
Number of waterways: 18
2. LED fan:
Appearance size: 12 * 12cm
Power supply interface: large 4Pin + small 3Pin
3. Universal CPU block (with 4 pcs screws):
Description: Universal for INTEL / AMD Dual Platform (For INTEL 775,1150,1155,1156,1366,) (For AMD: AM2, AM3, AM3 +)
Note: Do not support for AMD4CPU CPU block, bracket supports for AMD INTEL mainstream hole installation.
Screw size: G1 / 4
Outside diameter: 12.9MM
Bottom contact size: 5 * 5cm, thickness 3mm
Material: Bottom: copper; Cover: transparent plexiglass
Pacakage List:
1 x 240mm Heat Sink within Screw Pack
2 x LED Fan
1 x Universal CPU Block within 4 Screws
1 x Universal GPU Block within 4 Screws
1 x Cylindrical Water Reservoir (Including 1 * screw pack, 2 * plastic bracket, 2 * metal bracket)
1 x Transparent Hose
1 x Water Pump with Shock Pad
1 x A Set of Water Pipe Connectors & Hose Clamps & Plugs
Similar items with 4 stars and above
anidees Graphic Card Cooler 3 x80mm PWM Fan, Support ASUS Aura SYNC/MSI Mystic Sync/ASROCK Aura RGB/GIGABYTE RGB Fusion (5V 3 Pin Addressable headers ONLY) PCI Mount Bracket with Remote- AI-GP-CL
- Parallel or Vertical Cooling down Graphic card directly with three high air flow RGB Fans
- Sturdy Metal with aluminum brush with PCI mount design for easy installation
- 80mm Dual Ring RGB Fans x3 pcs: 12 independent RGB LEDs in every fan, split between two separate light loops, Rainbow and static colors.
- Easy to use: the fan allows you to control the fan speed and LED mode by remote control, or connect to the motherboard, control the fan speed by PWM and light by 5V 3pin ASUS Aura Sync, MSI Mystic Light Sync (J-Rainbow) and GIGABYTE RGB Fusion 2.0 (Please note: It does not support 12V 4 pin RGB header from motherboard).
- PWM fan speed control: allows for dynamic speed adjustment, minimizing noise or maximizing airflow.
- RF wireless control: allow you to adjust Fan Speed and cycle through lighting effects / brightness / LED speed without opening the case.
Specifications:
Part No : AI-GP-CL
LED Color : RGB
Dimension:11.22 x 3.7 x 1.02 inches
Fan Dimension : 80 x 80 x 20 mm
Weigh : 1 lb
Max Air Flow : 11.14 CFM
Max Air Pressure: 0.49 mm-H2O
Fan Speed: 1600 rpm ± 10% RPM
Noisy Leve : 19.3 dBA
Bearing : Rifle Bearing
Connector : 5 PIN
Voltage :12 V
Start Voltage : 8.5V
Power consumption : 3.12W
Buy with confidence: 12 Months Warranty, 24 hours friendly customer service available at all time.
Thermaltake Pacific C360 Ddc Res/Pump 5V Motherboard Sync Copper Radiator Soft Tube Water Cooling Kit CL-W253-CU12SW-A
- Analog/digital lighting – Analog lighting allows a selection of 7 lighting effects with the included a RGB Controller. Connect lights to select 5V RGB Capable motherboards TO utilize digital lighting schemes from as US aura Sync, Gigabyte RGB FUSION, MSI Mystic Light Sync, and ASROCK polychrome Sync
- All includded – the C360 soft tube Kit contains a CPU water block, pump/reservoir, radiator, fans, fittings, tubing, and coolant, which are components necessary to complete a CPU water cooling loop
- Slim copper radiator – the C360 is engineered with 12 copper flat tubes and 17 fins per Inch. This radiator’s 27mm thick design assures fitment compatibility with most form Factor chassis
- Exclusive components – W4 a RGB Edition water block, T1000 pure Clear Coolant, and a new pr15-ddc pump/reservoir combo
- 2 years
Thermaltake Pacific C360 DDC soft tube Water cooling kit is designed for users who likes an efficient and high-quality Combo kit that is ready to sync with 5V RGB Capable motherboards from Asus, Gigabyte, MSI and as rock. The kit includes three pure 12 a RGB sync radiator fans, a Pacific W4 a RGB CPU water block, Pacific pr15-ddc pump/reservoir Combo, Pacific C360 radiator, a bottle of T1000 transparent coolant pure Clear, six Pacific 1/2” Id x 3/4” Od compressions, two meters of V-Tumbler 4T 1/2’‘(12. 7mm) ID x 3/4’‘(19mm) OD transparent tube, an a RGB LED controller, and other accessories. dimension: 520 (L) x 200 (W) x 232 (h)compatibility: intel LGA 2066/2011/1366/1156/1155/1151/1150/775amd AM4/FM2/FM1/AM3+/AM3/AM2+/am2(cpu socket)components Dimension: pump & reservoir: 86. 54 (L) x 62 (W) x 140. 1 (H) mm copper radiator: 29. 5 (H) x 119 (W) x 399 (l) mm tube Dimension: od: 16mm, ID: 12mmfan spec: pwm 5001500 RPM, ( a RGB Controller or 5V MB a RGB sync )coolant: T1000 coolant pure clear kit contents: cpu water block – Pacific W4 a RGB CPU water block x1pump/reservoir- Pacific pr15-ddc pump/reservoir Combo x1copper radiator- Pacific C360 radiator 29. 5 (H) x 119 (W) x 399 (l) mm x1argb fan- pure 12 a RGB sync radiator fan TT Premium Edition x3- a RGB LED controller fittings – Pacific 1/2” Id x 3/4” Od compression – Black x6- Pacific G1/4 90 degree adapter – Black x2coolant- Thermaltake T1000 coolant pure Clear x1 tube- V-Tumbler 4T 1/2’‘(12. 7mm) ID x 3/4’‘(19mm) transparent tube x2 meters accessory- Intel and AMD universal Back Plated & mounting kit- 24pin ATX bridge tool x1- Thermaltake thermal grease x1
Similar items with 4 stars and above
CORSAIR HYDRO Series H115i PRO RGB AIO Liquid CPU Cooler,280mm, Dual ML140 PWM Fans, Intel 115x/2066, AMD AM4
- Dynamic Multicolor RGB Lighting: Vibrant RGB LED pump head produces vivid lighting effects to match your build
- Powered by Magnetic Levitation: Three low noise 140mm ML Series magnetic levitation PWM fans deliver incredible airflow and produce just 25 dB of noise at full speed
- Powerful Software: CORSAIR iCue software allows you to adjust RGB lighting, individual fan speeds, and pump speed while monitoring CPU and coolant temperatures
- Zero RPM Mode: Zero RPM cooling profile in CORSAIR iCue software allows fans to stop entirely at low temperatures, eliminating fan noise
- Compatible Sockets: Intel LGA 1150, 1151, 1155, 1156, 1366, 2011, 2011 3, 2066 and AMD AM2, AM3, AM4, FM1, FM2
EKWB EK-KIT Performance Series PC Watercooling Kit P360
- Universal CPU water block: EK-Supremacy EVO (incl. LED diode, mounting- & thermal material)
- Water pump-reservoir combo: EK-XRES 140 Revo D5 PWM (incl. pump)
- Radiator: EK-CoolStream PE 360 (Triple)
- Compression fittings: EK-ACF Fitting 10/13mm (3/8” – 1/2”) – G1/4 Nickel (6 pcs)
- Radiator fan: EK-Vardar F3-120 (1850rpm) (3pcs)
The EK-KIT P360 is the ultimate liquid cooling kit dedicated to all users who seek the easiest way to start with their first custom loop at the best price-performance ratio on the market! Everything you need to assemble your first custom loop with carefully chosen components that will last you a long time!This water cooling kit is compatible with the following CPU sockets: Intel LGA-1150/1151/1155/1156, Intel LGA-2011(-3), Intel LGA-2066, AMD Socket AM4.
Model: 3831109863473
NZXT Kraken G12 – GPU Mounting Kit for Kraken X Series AIO – Enhanced GPU Cooling – AMD and NVIDIA GPU Compatibility – Active Cooling for VRM – Black
- ENHANCE YOUR GPU COOLING: With a 40% increase in cooling capacity compared to stock cooling, you’ll maximize your GPU clock speeds for higher performance and better frame rates
- COMPREHENSIVE COMPATIBILITY: Supports both reference and non-reference design AMD and NVIDIA GPUs, for more than 30 liquid coolers, including aftermarket VRM heatsinks
- ACTIVE COOLING FOR VRM: Comes with a 92mm fan, providing active cooling for the VRM and memory on the graphics card
- EASY INSTALLATION: Designed for a fast and easy installation, you can now lay the graphic card flat as you install the Kraken G12
- SUPPORTS: Kraken X42/X52/X62/72 Liquid Coolers
Quickly mount any Kraken X Series liquid cooler onto graphics cards with the Kraken G12 mounting kit. It delivers a 40% increase in cooling capacity over stock cooling, and features a newly designed bracket with an easier installation process versus the Kraken G10. Plus, the G12 is compatible with more than 30 liquid coolers on the market.
XSPC Razor Radeon Pro Duo Backplate
Backplate for reference design AMD Radeon Duo Pro cards. Technical Details – Dimensions: 266.7 x 100.04 x 4mm – Material: Aluminium. Box Contents: 6x 1mm thermal pad, 17x M3 * 10mm screws, 17x M3 red washers, 1x Allen key. Please note: This backplate requires an XSPC Razor waterblock for installation and cannot be installed with the original heatsink.
Model: 5060175587060
Innovation Cooling Graphite Thermal Pad – Alternative to Thermal Paste/Grease (30 X 30mm)
- TOP TIER THERMAL PERFORMANCE – The IC graphite pad features a thermal conductivity of 35W/m-k.
- EXTRAORDINARY DURABILITY – This thermal pad features a dry solution that contains no liquids. It will not pump or bake out like regular thermal compounds.
- UNMATCHED TEMPERATURE RANGE – Keeps your CPU safe with a temperature operating range of -200C to 400C. RoHS compliant.
- TAKE THE GUESSWORK OUT – The modular solution means never again having to wonder if you’ve applied too much or too little thermal paste.
- REUSABLE – You’ll never have to worry about buying thermal paste ever again. The graphite thermal pad can be reused on multiple builds with no loss in performance.
IC Graphite Thermal Pad is a thermal interface alternative to thermal paste for CPU’s, GPU’s and Game stations. This product features top tier thermal performance that is uniquely stable across a wide temperature range -200C to +400C and when used long term should last the life of most electronic components. IC Graphite is 100% pure graphite, non toxic this pad is a solid state modular solution no messy applications to clean, no guessing if you have used the proper amount, just place pad and mount sink. Caution: IC Graphite is electrically conductive! Any contact with electrical components when the computer is turned on can permanently damage the components.
Similar items with 4 stars and above
Conclusion
By our suggestions above, we hope that you can found gpu cooling kit for you.Please don’t forget to share your experience by comment in this post. Thank you!