Which Is The Best Heating Mat Exo Terra

The Exo Terra Sun-Glo Neodymium Daylight Basking Spot Terrarium Lamp provides broad spectrum daylight for terrariums. Reptiles require appropriate and high quality lighting in order to meet various metabolic needs. In order to accommodate all these needs, multiple light sources need to be combined. The glass sleeve of the bulb has mixed-in Neodymium, a rare earth metal that changes the color balance of the illumination, giving terrarium animals and plants a more natural appearance. The broad spectrum is ideal for plants’ photosynthesis and the UVA light contributes to the reptiles’ physiological well-being. The Exo Terra Sun-Glo Neodymium Daylight Basking Spot Terrarium Lamp creates a basking area for thermoregulation and also increases the ambient air temperature in the terrarium.

The Exo Terra Swamp Glo Basking Spot Terrarium Lamp is a splash and mist resistant basking spot lamp designed for use in aquatic or extremely humid terrarium set-ups, where high humidity or accidental water spillage could cause a regular basking lamp to burn out or shatter. Reptiles require appropriate and high quality lighting in order to meet certain different metabolic needs. The outer sleeve is made from extra strong neodymium glass, and the Exo Terra Swamp Glo Splash and Mist Resistant Basking Spot Terrarium Lamp helps enhance animal coloration.

The Exo Terra Glow Light Porcelain Clamp Lamp gives you the versatility of placing heat and/or light sources on your terrarium where needed. The device is sturdily constructed, with a metal reflector, heat resistant ceramic socket, and a spring-loaded swivel clamp. The Exo Terra Glow Light Porcelain Clamp Lamp can be easily turned off and on by the switch, mounted on the extra long power cord. The inside of the reflector is coated with a highly reflective luminous coating that continues to glow long after the lamp is turned off. This allows diurnal reptiles and amphibians to retreat in their night burrow or hiding without stress. A moon-like glow enables nocturnal reptiles and amphibians to see properly without disturbing their night cycle. The Exo Terra Glow Light Porcelain Clamp Lamp is also ideal to monitor your animals during night time, without switching on the lights which can cause stress and disorientation. The coating reflects the otherwise wasted light rays and stores the light energy during daytime. The rays are then slowly released at night, which makes this fixture more energy efficient then conventional fixtures. There is no need to add an additional night bulb, unless used as a heating source.

Reptiles rely on external heat sources to elevate their body temperature. Zilla Heat Mat Terrarium Heaters provide warmth for reptiles to absorb from their surrounding environment in order to maintain and thermo-regulate heat used for daily activities, appetite and digestion.

“The iPower heat mat thermostat provides constant customized temp seed germination, reptiles and brewing. It is ideal for maintain rooting temperature in a tray and dome. Ideal in homebrewing for maintaining desired fermentation temperature, and perfect for temperature control in reptile terrariums and small pet enclosures. This heat mat controller is compatible with all heat mats, but is optimized for iPower seedling heat mats. Features: 1.Controls temperature in colder or warmer environments 2.Digital temperature controller for heat mat 3.Provides constant optimum temperature for specific crops 4.Digital thermostat provides temperature control between 40°F-108°F (5-42°C), temperature display range: 32 -140°F 5.Celsius or Fahrenheit read-out 6.Specs: 120 Volts / 8 Max Amps / 60 HZ / 1000 Watts 7.Easy plug-in operation with LED illuminated indicator lights & three-prong ground plug 8.CETL certification is proof that a product complies with widely-accepted safety standards 9.1 Year Manufacturer Warranty Seeding Heat Mat Setup Instructions： Place sensor into the rooting area about 1″”- 1-1/2″” Position thermostat up and away from seedling trays and stray water. Do not submerge Plug heat mat into thermostat Plug in thermostat power cord and set maximum desired temperature Heat mat thermostat can also be used to control the temperature of many other appliances as long as they don’t exceed the maximum electrical specifications stated above. Simply place the sensors in the area where the temperature needs to be controlled plug the appliance into thermostat, and set the desired temperature. NOTE: Please note that the controller can only be used to power off heating equipment at setting temperature and does not increase the heating power of the heating equipment. Abnormal Warning： If thermostat shows “”E1″”, it means that the actual temperature is lower than 0 degree Celsius or 32.0 degrees Fahrenheit If thermostat shows “”E2″”, it means that the actual temperature is higher than 60.0 degrees Celsius or 108.0 degrees Fahrenheit If thermostat shows “”E3″”, it means that the temperature sensor is not working properly. Please re-install the sensor”

The iPower reptile heating pad is specially designed to be used on standard glass terrarium for reptile, amphibian, small animal, or plant terrariums. Compared with other general heat pads on the market, our heat pad includes a new proprietary heating film technology that allows the pad to reach desired temperatures faster.

Also included is the new and improved digital heat mat controller. The new iPower heat mat thermostat is digital for greater accuracy. It provides constant customized temp for fermentation, reptiles or brewing.

Specifications

1 – Heat Mat (8″x 18″ Watt: 24W) / 1 – Digital Thermostat (120 Volts / 8.3 Amps Max /60 HZ)

S : 4″x7″ 4 watt — 1-5 Gallon
M : 6″x8″ 8 watt — 10-20 Gallon
L : 8″x12″ 16 watt — 30-40 Gallon
XL : 8″x18″ 24 watt — 50-60 Gallon

Improved Design：
New heating film and insulation increases overall heat transfer across the mat. Reach desired temperatures within minutes.

3M Adhesive Paper：
Provides a strong grip to the contact area. The heat mat stays exactly where you want it.

Energy Efficient：
Reach desired temperatures in a shorter amount of time while consuming less power than other heat mat products.

About Our Digital Thermostat：
Temperature can be set from within a wide range, 40°F – 108°F (5-42°C)
The controller is compatible with most heat mats and ready to plug into North American outlets
Delivers excellent results for seedling germination, plant growth, reptile, or brewing
The thermostat controller is rigorously tested to ensure the safety of your plants, pets and DIY projects.

The Exon Terra Wire Light has a heat resistant porcelain socket designed to withstand up to 150 Watts/ 250 Watts. Ideal for use with Ceramic Heater, self-ballasted mercury vapor bulbs, and all types of regular incandescent bulbs. The wire guard prevents unnecessary heat build-up. The Exon Terra Wire Light is the only lamp that meets all safety regulations when used in conjunction with the Exon Terra Ceramic Heater. Combine the Wire Light with the Exon Terra Light Bracket to suspend it securely above any glass terrarium.

Conclusion

By our suggestions above, we hope that you can found heating mat exo terra for you.Please don’t forget to share your experience by comment in this post. Thank you!