homekitchenart 
Nowadays, there are so many products of hot water temperature control mixer valve in the market and you are wondering to choose a best one. You have searched for hot water temperature control mixer valve in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings hot water temperature control mixer valve which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
Hot & Cold Water Mixing Valve Temperature Control Thermostatic Mixer for Automatic Sensor Faucet
- This is a mixing valve for automatic sensor faucet.
- Brass construction ensures a stable performance.
- Connections: G 1/2″.
- Connect to hot and cold water- and mixed out
- Easy control of hot and cold water mixing ratio to adjust water temperature.
- Built-in check valves are effective in avoiding cold and hot water backflow.
Gangang G Symmons Tempcontrol Thermostatic Mixer, Brass Tempered, Inlet, Outlet G1/2,Solar Energy Valve Faucet Tap, white
1. Operating pressure: 0.05 – 1.0 Mpa2. Theoretic pressure: 0.1 – 0.5 Mpa If the pressures over 0.5 Mpa, please installation a relief pipe. 3. Cold water supply: 5 – 29 ℃4. Hot water supply: 50 – 80 ℃5. Adjustable temperature range: 20 – 50 ℃6. The most comfortable temperature: 38 ℃ Under 0.3Mpa, cold water temperature within 18–23℃; hot water temperature within 60–80℃. 7. Safety test: If interrupted cold water supply within 5 seconds, the outflows reducing to 1.9L/Min automatically, the outflows less than or equal to150ml, the outflows temperature: less than or equal to 49 ℃.8. Life test: Testing under EN817, GB/T18145-2000 (over 70.000 cycles), Testing under CSA B125-98 ASSE 1016 (over 10.000 cycles).9. Sensitivity test: If inlet water temperature is constant, and the pressure in changeable about 20%, the outflows temperature changes less than or equal to 2℃; If inlet water pressure is constant and hot water temperature changes in 50-80℃, cold water changes in 5-29℃ then the outflows temperature changes less than or equal to 2℃.10. Applicable Standards：CSA B125-98 ASSE 1016 EN1111 AS-4032.111. The water supply pressure impacts on outflows temperature: Please read the following chart (Fig.1).
Similar items with 4 stars and above
Delta Faucet Lahara 17 Series Dual-Function Shower Handle Valve Trim Kit, Chrome T17038 (Valve Not Included)
- ROUGH SOLD SEPARATELY: Shower trim kit only, purchase Delta’s MultiChoice Universal Shower Valve separately to complete the unit (recommended rough-in valve model R10000-UNBX or R10000-UNBXHF)
- PROTECTION FROM SUDDEN TEMPERATURE CHANGES: The Monitor Pressure-Balanced Valve Cartridge (included) ensures a consistent shower temperature by balancing the pressure of both hot and cold water, so no sudden temperature changes from toilet flushing or running appliances
- DUAL-FUNCTION HANDLE: The dual-function shower handle allows you to adjust the water temperature and volume separately for maximum control
- LIFETIME LIMITED WARRANTY: You can install with confidence, knowing this Delta shower head and shower trim kit are backed by Delta Faucet’s Lifetime Limited Warranty
- INSTALLATION: Installing this product may require removal of existing tile or shower walls if current valve body is not a Delta MultiChoice Universal Valve. Consider consultation with an installation professional prior to purchase.
Sloan 3326009 Valve, 1 Pack
Product Description
Every day around the world, Sloan products connect the systems that manage our planet’s most precious resource. As the world’s leading manufacturer of commercial plumbing systems, they’ve spent more than a century pioneering smart, water-saving restroom solutions that are built to last a lifetime.
From the Manufacturer
Regardless of your requirements, Sloan offers a variety of solutions to meet your water conservation and restroom needs. For below deck installations with built-in check valves.
Similar items with 4 stars and above
Hiendure Solid Brass Copper Cartridge 1/2" IPS Male Connections Thermostatic Mixing Valve for Solar Shower System Water Temperature Control, Chromed
- Connect to hot and cold water – and mixed out
- Thermostatic Mixing Valve (temperature control) with non-return inlets
- Cold water supply temperature:4-29°C ,hot water supply temperature:55-85°C
- If cold water supply fails ,flow rate will be reduced to virtually shut off which avoid the risk of
- Temperature accuracy:Kept constant ±2°C for the setting.
Moen 2510 Monticello PosiTemp Pressure Balancing Shower Valve, 1/2-Inch IPS
- REPLACEMENT PART: Ideal for repairing problematic plumbing fixtures without the need to replace them
- ORIGINAL EQUIPMENT MANUFACTURER: Authentic Moen replacement part
- CONNECTION SIZE: 1/2-inch IPS connections
- BUILT TO LAST: Backed by Moen’s Limited Warranty
- Moen 2510 Monticello PosiTemp Pressure Balancing Shower Valve, 1/2-Inch IPS
- REPLACEMENT PART: Ideal for repairing problematic plumbing fixtures without the need to replace them
- ORIGINAL EQUIPMENT MANUFACTURER: Authentic Moen replacement part
- CONNECTION SIZE: 1/2-inch IPS connections
- BUILT TO LAST: Backed by Moen’s Limited Warranty
Product Description
Built on the Moen M-PACT common valve system that allows you to make style updates any time without replacing plumbing and equipped with PosiTemp technology to maintain water temperature, the Moen Monticello PosiTemp Pressure Balancing Shower Valve delivers generous water flow. The four-port, cycle valve also allows you to predetermine the hottest temperature setting before installation, while its 1222 cartridge accommodates back-to-back installations. Featuring four ports and durable brass construction, this valve meets ASSE performance requirements and is backed by Moen’s Limited Lifetime Warranty against leaks, drips, and finish defects.
Amazon.com
Changing the look of your bathroom has never been faster and easier thanks to Moen’s M-Pact Common Valve System. The Monticello PosiTemp 1/2-inch IPS valve (model 2510) allows you to upgrade the trim style or swap out finishes on your fixtures without replacing the valves. So once the system is in place, you can change your decor as often as you want at any point in time — during construction process or years down the road. All changes can be made above the deck or in front of the wall, and it just takes few minutes. Best of all, the M-Pact Common Valve System is as easy to install as a standard valve.
The Monticello 2510 features a PosiTemp pressure-balancing control valve to help maintain water temperature in the shower, brass construction, 1/2-inch IPS connection type, and four ports. The 1222 cartridge accommodates back-to-back installations. This valve meets ASSE performance requirements.
What Sets Moen Apart?
From a variety of styles designed to complement today’s decors to faucets that perfectly balance your water pressure, Moen sets the standard for exceptional beauty and reliable, innovative design. Additionally, all Moen products come with a Limited Lifetime Warranty against leaks, drips and finish defects.
What’s in the Box
Moen 2510 Monticello PosiTemp 1/2-inch IPS valve; installation instructions
Moen 2510 1/2″ IPS Posi-Temp Rough-In Valve
At a Glance
- Moen M-Pact common valve system allows you to easily update your faucet style in the future
- PosiTemp pressure-balancing valve maintains water pressure and controls temperature
- 1/2-inch IPS connection with four ports
- Brass construction
- Limited lifetime warranty
Fyeer Faucets Hot and Cold Water Temperature Mixer Mixing Valve for Touchless Sensor Faucet, Polished Chrome
- This valve connects to the hot and cold water source under the sink, and provides a single proportioned water-output for the faucet to use.
- This item is normally used in conjunction with a touchless / hands-free faucet.
- Handle wheel for for easy control of the hot & cold mixing ratio, thread standard is G1/2.
- Brass construction ensures a stable performance. Check Valve to prevent hot and cold water from colluding.
- Easy to install, just connects it to the hot and cold water source under the sink, and provides a single proportioned water-output for the faucet to use.
Similar items with 4 stars and above
KES ML100 SOLID BRASS 3-Way Thermostatic Mixing Valve G 1/2 Male Connections, 68-119 ¨H Stepless Adjustment
- Shape Memory Alloy (SMA) cartridge, ensuring precise control and long lasting.
- PREMIUM BRASS BODY: ONE-PIECE STURDY BRASS (non-plastics) faucet body ensures quality and longevity.
- CONNECTION: 1/2″ male connections.
- 68-119 ¨H/20-48¡æ Stepless Adjustment
- Ideal for bathroom, washroom, kitchen, wash and etc.
SPECIFICATIONS
-Body Material: High Quality Brass
-Cartridge: Shape Memory Alloy (SMA), precise control and durable
-Connection: 1/2″ male straight threads
-Inlet Cold Water Temprature Requirement: 34-84°F/1-29°C
-Inlet Hot Water Temprature Requirement: 113-210°F/45-99°C
-Outlet Water Temprature: 68-119 °F/20-48°C
-Notice: Press Red Button if you need water higher than 100°F or 38°C
Package Includes
1x Thermostatic Mixing Valve
About KES
Founded in 1996, KES is a professional manufacturer in kitchen and bathroom industry. We strive to provide industry-leading quality, affordable products to customers worldwide.
– ISO9001 certified quality management system
– Socially responsible company, BSCI compliant
– Original designs under global patent protection
– Served millions of users from Europe, North America and Asia
– Walmart, Home Depot trusted supplier
– ISO9001 certified quality management system
G1/2 Faucets Hot & Cold Water Temperature Mixer Mixing Valve Temperature Control Thermostatic Mixer for Automatic Sensor Faucet
- 【High quality】100% brand new and high quality mixing valve for automatic sensor faucet.
- 【Premium material】Made with thickened brass valve ensures a stable performance and long service life.
- 【Easy to use】Connect to hot and cold water then mixed out, easy to
- control hot and cold water mixing ratio to adjust water temperature.
- 【Practical tool】 Built-in check valves are effective in avoiding cold and hot water backflow.
Description:
Automatic faucets do not have hot & cold handles to adjust the water temperature coming out of the spout, and normally installed to a single water supply only. This valve is used for a automatic faucet to mix hot and cold water, and to control water temperature.
Features:
【High quality】100% brand new and high quality mixing valve for automatic sensor faucet.
【Premium material】Made with thickened brass valve ensures a stable performance and long service life.
【Easy to use】Connect to hot and cold water then mixed out, easy to
control hot and cold water mixing ratio to adjust water temperature.
【Practical tool】 Built-in check valves are effective in avoiding cold and hot water backflow.
【Specification】 G1/2 standard thread fits for many household or commercial pipes.
Specifications:
Main Material: Brass
Thread: G1/2 (BSP)
Size: 70*55*50mm
Working Pressure; 0.05MPa-0.5MPa
Cold Water Temp: 0℃
Hot Water Temp: 85℃
Outlet Flow Rate: 20m3/h
Package Includes:
1 * Valve
G1/2 Hot Cold Water Mixing Valve Solid Brass Thermostatic Mixer Temperature Control for Bathroom Automatic Sensor Touchless Faucet
- Thickened solid brass construction ensures a stable performance and long service life
- Built-in check valves are effective in avoiding cold and hot water backflow
- Connect to hot and cold water- and mixed out
- Easy control of hot and cold water mixing ratio to adjust water temperature
- Easy to install and use,one end is cold water inlet, one end is hot water inlet, and the middle mixed water outlet
- G1/2 standard thread fits for many household or commercial pipes
Conclusion
By our suggestions above, we hope that you can found hot water temperature control mixer valve for you.Please don’t forget to share your experience by comment in this post. Thank you!
