homekitchenart 
Nowadays, there are so many products of ninja blender fin blade and cup in the market and you are wondering to choose a best one. You have searched for ninja blender fin blade and cup in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings ninja blender fin blade and cup which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
18,030 Reviews Scanned
Blender Blade Replacement Parts for Ninja 16 oz Blender Cup, 6 Fins Blender Extractor Blade Replacement,4 Blade Assembly For Nutri Ninja Bl770, Bl771, Bl773co,Bl780, Bl660, Bl740
- 【PREFECT FIT】: Blender Blade Assembly for Nutri Ninja BL770, BL771, BL773CO, BL780, BL660, BL740, only fits for 16 oz Cup, 6 Fins, 3.35 inches / 8.5 cm
- 【GOOD REPLACEMENT】: Effortlessly Pulverizes Fruits, Vegetables, Superfoods and Protein Shakes into a Delicious, Smooth Texture. Dishwasher Safe.
- 【PREMINUM QUALITY】: Made of food grade PP and stainless steel
- The replacement blade has been well-tested by the manufacturer.
- 【PAY ATTENTION】: This blade is Only fit for Ninja 16oz Cup. (Not fit 18oz, 24oz, 32oz)
- 【100% SATISFACTION GUARANTEE】 Please kindly check your Ninja blender is 6 fins blender before purchase. With 3 months warranty: for any reason you’re not completely satisfied,can ask for a replacement or full refund.
AxPower 7 Fins Extractor Blades Replacement Part Bottom Blade for Ninjia Blender for Nutri Ninja Auto iQ BL482 BL642 NN102 BL682 BL2013 and More(2 Pack, 7 Fins)
- 【APPLY TO】The 7 fins extractor blade is suitable for Nutri Ninja Auto iQ BL2012, BL2013, BL455-30, BL480, BL480D 30, BL481, BL482-30, BL486CO, BL487, BL487A, BL488W, BL490, BL491, BL492, BL492W, BL494, BL640, BL641, BL642, BL642W, BL642Z, BL680A, BL682, NN100, NN100A, NN101, NN102 (Only fit for 18oz, 24oz, 32oz cup not fit for 16oz). Please make sure your Ninjia blender base has 7 fins before order.
- 【HIGH QUALITY】The high-speed blade is made of food-grade stainless steel, high hardness brings qualified anti-corrosion performance. Moreover, the outer is made of durable PP material, not easy to break and scrape.
- 【IMPORTANT NOTE】Note1: The rubber gasket in bottom blade maybe will loosen during transportation. Please check the gasket and make sure it is put snugly into the replacement bottom blade before using it. Note2: If you’re going to use this replacement gasket, please TAKE OFF the PRE-INSTALLED GASKET in the bottom blade.
- 【PACKAGE INCLUDED】 2 x 7 Fins Bottom Blade Replacements, 2 x Extra Gasket Rubbers and 1 x Cleaning Brush as a gift.
- 【BUY WITH CONFIDENCE】Thank you so much for your great support on us. Product quality and customer satisfaction is our top priority. If you have any questions please contact us, we will provide the best service as we can.
Similar items with 4 stars and above
Replacement Parts for Nutri Ninja, Blender Blade Assembly and 2 Pack Single Serve 16-Ounce Cup Set for BL770 BL780 BL660 Professional Blender
- BEFORE PURCHASING – Please check your existing blade for the following 1) Count the FINS IT SHOULD BE 6-FINS. 2) The blade has MALE FINS. 3) 3.35″ (8.5cm) Diameter. 6 fins blade only fits for Ninja BL770, BL771, BL773CO ,BL780, BL660, BL740
- EASY TO USE – Simply attaches to Pro Extractor Blades included with your blender. The Pro Extractor Blades are able to crush through whole fruits, vegetables, nuts, and ice.
- EASY TO CLEAN – The 16-Ounce Cup and Blender Blade are Made of Eco-friendly materials, dishwasher safe, easy to clean.
- PACKAGE INCLUDE – 1* Single Serve Blade, 2 * 16-Oz Single Serve Cups with Lid
- MONEY-BACK GUARANTEE – It’s non-original aftermarket part. for any reason you’re not completely satisfied,can ask for a replacement or full refund.
Anbige 6 Fins Blade for Ninja Blender Replacement Parts Accessories for BL660 BL770 BL740 BL771 BL773CO (1 Blade)
- Fits For Ninja BL660 BL740 Ninja Mega Kitchen System (BL770) Blender/Food Processor with 1500W BL770A 30/ BL770 30/BL773CO 30/BL771 30/BL772 30/ 1200W NINJA BLENDER BL780 30/BL780C0 30
- This Replacement Blade is Made of Stainless steel, Is Dishwasher Safe and Never Needs Sharpening.
- The blade is presented with a plastic asphalt cover, which can keep the blade dry after cleaning, and increase the service life of the blade
- MADE IN CHINA
- Only Fits for 16oz cup
WHYCHOOSE Anbige?
High quality: Anbige are manufactured to meet or to exceed the original manufacturer standards
Variety of kits: we offer a wide range of replacement for blenders
Return policy: your satisfaction is our first priority, if you are not happy with an item, you can return it in accordance with Amazon Return policyThis product is designed and manufacturedby Anbige. Any use of other brand names ormodel designation is made solely for the purposes of demonstratingcompatibility.
Similar items with 4 stars and above
Ninja Blender Replacement Parts 7 Fins Replacement Extractor Blade Parts for Nutri Ninja Blender Blade Assembly Fits 1000w Nutri Ninja Auto-iQ BL480-30 BL482-30 BL682 BL640
- 【Ninja Blade Apply to】7 fins Nutri Ninja Auto iQ BL2012, BL2013, BL480, BL480D, BL481, BL482-30, BL486CO, BL487, BL487A, BL488W, BL490, BL491, BL492, BL492W, BL640, BL641, BL642, BL642W, BL642Z, BL680A, BL682, NN100, NN100A, NN101, NN102, BL2012 (Please confirm your blender need 7 fins replacement blade before purchasing).
- 【Nutri Ninja Replacement Parts】 Pro Extractor Replacement Blade by Best Potok. 7 Fins, 4″/10CM diameter, 165g, made of food grade PP and stainless steel.
- 【Important Tips】Note1: The rubber gasket in bottom blade maybe loosened during transportation. Before using the bottom blade, please check the rubber gasket and be sure it is put snugly into the replacement bottom blade.Note2: Please TAKE OFF the PRE-INSTALLED GASKET in the bottom blade, if you’re going to use this replacement gasket.
- 【Packing Include】 1x 7 Fins Bottom Blade Replacement, 2 x Replacement Gasket Rubber ( One Gasket Rubber already on the 7 fins replacement blade). Please check your existing blade by counting the fins before purchase. It Should Be 7fin.
- 【100% SATISFACTION GUARANTEE】 If you are buying before or after purchase any questions, please feel free to contact us, we’ll issue you a full refund or replacement.
One Ninja replacement blade assembly (7-fin as pictured) for Nutri Ninja Blender. Fits NUTRI NINJA r BL487 BL487QPL BL488W BL490 BL491 BL492 BL492W BL640 BL641 BL642 BL642W BL642Z BL680 BL680A BL682 BL450-30, BL451-30, BL454-30 & BL456-30.
KIND REMINDER BEFORE PURCHASE:
1: Your original motor base must be 7 fins. The Nutra Ninja Replacement Blade can’t fit all the 7 fins blender’s motor base: there are too many models of ninja blender blade, if the last two digitals(not part of model #) or any character is difference, please don’t purchase it
2: Your blender model must be identical with our stated model.”ONLY COMPATABLE WITH” 7 fins model Auto iQ BL2012, BL2013, BL480, BL480D, BL481, BL482-30, BL486CO, BL487, BL487A, BL488W, BL490, BL491, BL492, BL492W, BL640, BL641, BL642, BL642W, BL642Z, BL680A, BL682, NN100, NN100A, NN101, NN102, BL2012.
NOT FIT FOR BL660, BL663, BL740, BL770, BL771,BL773CO, BL780, BL780,BL820,BL830,BL450,BL451-70,BL454-70,BL482-70. Please check your model carefully before purchasing.
TIPS FOR USAGE
1. You are recommended to replace your ninja blender every 6 months or as needed for optimal performance
2. Please check whether the gear of the bottom loosen or tighten before use. If it’s loosen, please tighten it
3. Please check the rubber gasket and be sure it is put snugly into the bottom blade. (The rubber gasket is used to avoiding leakage）
4. Do not overfill! To avoid spilling, do not add ingredients past the “Max” fill line
5. Place the replacement blade onto the cup and screw it tightly until you have a good seal
6. Please make sure it in right place and locked tightly
7. Do not run your blender over 4 minutes at a time to prevent overheating of the blender
Replacement Nutri Ninja 6-Fin Extractor Blade FITS Nutri Ninja Blender Auto iQ BL450-70 BL451-70 BL454-70 BL455-70 BL482-70 Only fit for 18 oz 24 oz.32 oz
- NUTRI NINJA 6 FIN Blade for Nutri Ninja Blender FITS ONLY THIS MODELS 900W BL450-70, BL451-70, BL454-70, BL455-70 1000W BL480-70, BL480W-70, BL481-70, BL482-70, BL483-70,BL484-70
- DOES NOT FIT THIS MODELS BL450-30, BL451-30, BL454-30, BL455-30 1000W BL480-30, BL480W-30, BL481-30, BL482-30, BL483-30,BL484-30
- DOES NOT FIT 16oz CUPS bl770,bl771.
- Ninja Blade Replacement 6 Fins – 3.94″/10cm diameter, effortlessly Pulverizes Fruits, Vegetables, Superfoods and Protein Shakes into a Delicious, Smooth Texture.
- NOTE – The replacement rubber gasket in bottom blade maybe loosened during transportation. Before using the bottom blade, please check the rubber gasket and be sure it is put snugly into the bottom blade. Also please sure your blader uses 6 fins.
NUTRI NINJA 6 FIN BLADES WORKS FOR THIS BLENDERS ONLY Nutri Ninja Pro Blender 900w BL450-70, BL451-70, BL454-70, BL455-70 and 1000w Auto-iQ BL480-70, BL480W-70, BL481-70, BL482-70, BL483-70, BL484-70
DOES NOT WORK FOR THIS MODELS Nutri Ninja Pro Blender 900w BL450-30, BL451-30, BL454-30, BL455-30 and 1000w Auto-iQ BL480-30 BL481-30 BL482-30 BL484-30
Blender Replacement Parts for Ninja,Replacement Blade with 16oz Cup,Lid and Stainless Steel Straws Compatible with Ninja BL660 BL770 BL740 BL771 BL773CO
- ✅【PACKAGE INCLUDE】: 1x BL660 Blade ,1x 16oz cup,1x cup lid, 2 x stainless steel straw, 1x straw cleaning brush.Blender replacement parts compatible with Ninja BL770, BL771, BL773CO ,BL780, BL660, BL740.
- ✅【PREMIUM QUALITY】: The blade is made of food grade PP and stainless steel
- The straws are made of top food grade 304 stainless steel, the drinking metal straws are the natural choice for everyone. All the materials are BPA free, plastic free, no metal aftertaste, no oxidation, colorfast, dishwasher safe, reusable and environmentally friendly.
- ✅【EASY TO USE】: Blade Replacement 6 Fins for Nutri Ninja, Replacement blade with high speed can effortlessly pulverizes fruits, vegetables, superfoods and protein shakes into a delicious, smooth texture. The blade has been well-tested by the manufacturer.
- ✅【MONEY-BACK GUARANTEE】: 3 months warranty
- for any reason you’re not completely satisfied,can ask for a replacement or full refund.
- 【ATTENTION】: This is 6 fins blade NOT 7 fins !!! And it Only fits for 16oz Blender Cup. (Not fits 18oz, 24oz, 32oz).Please make sure your blender base has 6 fins.
Blender Replacement Parts for Ninja,Blender Cups 18oz with Blades Replacement 7 fins for Ninja BL480-30 BL482-30 BL682
- Pack of two: one replacement blade 7 fins with one cup 18 oz for Ninja Blender. 18 ounce-cups Diameter 3.9 inches(9.5cm)
- Height, 6 inches (15cm). Enjoy even more of your favorite fruit and veggie in this roomy cup!
- Please confirm your blender need 7 fins replacement blade (NOT FIT 6 fins). Made of food grade PP and stainless steel. Food grade plastic. BPA free. No bubbles or cracking of plastic. Perfect seal with no leaking.Threads are smoothed for easy on and easy off.
- Fits model # end with 30: fits for 1000w/1100w Nutri Ninja Auto iQ BL480-30, BL481-30, BL482-30, BL483-30, BL486CO-30
- fits for 900w BL450-30,BL451-30
- Fits All models: BL487, BL488W, BL490, BL491, BL492W, BL492, BL640, BL641, BL642, BL642W, BL642Z, BL680, BL680A, BL682.
- This is non-original aftermarket part but It made exactly fit for Nutri Ninja blender.
Similar items with 4 stars and above
Replacement Blade 6 Fins For Nutri Ninja BL660 BL770 BL740 BL771 BL772 BL773CO, Replacement Parts 6 Fins For Nutri Ninja (2 Pcs)
- 3.35″/8.5cm diameter, made of food grade PP and stainless steel, perfect fit Nutri Ninja Blade Replacement 6 fins, Effortlessly Pulverizes Fruits, Vegetables, Superfoods and Protein Shakes into a Delicious, Smooth Texture.
- Replacement Parts for Nutri Ninja Blender 6 fins replaces for Ninja BL770, BL771, BL772, BL773CO , BL780, BL660, BL740
- Note: The rubber gasket in bottom blade maybe loosened during transportation. Before using the bottom blade, please check the rubber gasket and be sure it is put snugly into the bottom blade
- Non-original aftermarket part but exactly fit for your Nutri Ninja Blender. 3 months warranty
- for any reason you’re not completely satisfied, can ask for a replacement or full refund
Our Promise to Readers
We keep receiving tons of questions of readers who are going to buy ninja blender fin blade and cup, eg:
- What are Top 10 ninja blender fin blade and cup for 2020, for 2019, for 2018 or even 2017 (old models)?
- What is Top 10 ninja blender fin blade and cup to buy?
- What are Top Rated ninja blender fin blade and cup to buy on the market?
- or even What is Top 10 affordable (best budget, best cheap or even best expensive!!!) ninja blender fin blade and cup?…
- All of these above questions make you crazy whenever coming up with them. We know your feelings because we used to be in this weird situation when searching for ninja blender fin blade and cup.
- Before deciding to buy any ninja blender fin blade and cup, make sure you research and read carefully the buying guide somewhere else from trusted sources. We will not repeat it here to save your time.
- You will know how you should choose ninja blender fin blade and cup and What you should consider when buying the ninja blender fin blade and cup and Where to Buy or Purchase the ninja blender fin blade and cup. Just consider our rankings above as a suggestion. The final choice is yours.
- That’s why we use Big Data and AI to solve the issue. We use our own invented, special algorithms to generate lists of Top 10 brands and give them our own Scores to rank them from 1st to 10th.
- You could see the top 10 ninja blender fin blade and cup of 2020 above. The lists of best products are updated regularly, so you can be sure that the information provided is up-to-date.
- You may read more about us to know what we have achieved so far. Don’t hesitate to contact us if something’s wrong or mislead information about ninja blender fin blade and cup.
Conclusion
By our suggestions above, we hope that you can found ninja blender fin blade and cup for you.Please don’t forget to share your experience by comment in this post. Thank you!
