Which Is The Best Replacement Oring For Water Filter

Description: Kinetic Wares manufactures only the highest quality replacement components. This includes three (3) water filter housing O-Rings compatible with:

The rigid polypropylene construction effectively removes dirt and sediment with impressive flow rates of up to 20 gallons per minute. Each cartridge contains two distinct micron layers. Larger particles are trapped near the exterior and progressively finer particles towards the filter core. Thus the cartridge has exceptional solids-holding capacity and will perform longer. The KleenWater KW810EC features plastic end caps with gaskets and a raised ridge grooved design which provides a significant increase in surface area. To provide prospective to the 5 micron sediment entrapment rating it is important to note the naked human eye can see down to 20 micron and a human hair is 100 microns in diameter. The industry universal dimension of 4.5 inch x 10 inch makes it compatible with filter housing manufacturers such as GE, Culligan, Cuno, Omni, Kenmore, Whirlpool WHKF-DWHBB and Ametek “Big Blue”.

Specifications 4.5 x 9.75 inch universal dimension 75/25/5 micron filtration Up to 20 GPM flow rate Change cartridge every 6 months or upon substantial pressure reduction Includes one water filter housing replacement o-ring for Whirlpool WHKF-DWHBB . These cartridges have an approximate diameter of 4.5 inches. The o-ring itself actually measures approximately 5.465 inches (inside diameter). We recommend consumers keep a spare o ring available to avoid urgent situations

KleenWater is a trademark of Pavel Water Filtration.

Four KleenWater Filters compatible with 3M Cuno Aqua-Pure AP810, AP801, Whirlpool WHKF-GD25BB

4.5 inch x 9.875 Inch water filter alternative cartridges. This KleenWater brand water filter replacement cartridge is a high quality, low cost alternative to the original manufacturer AP810. The rigid polypropylene construction effectively removes dirt and sediment with impressive flow rates of up to 20 gallons per minute. Each cartridge contains two distinct micron layers. Larger particles are trapped near the exterior and progressively finer particles towards the filter core. Thus the cartridge has exceptional solids-holding capacity and will perform longer. The KleenWater KW810EC features plastic end caps with gaskets and a raised ridge grooved design which provides a significant increase in surface area. This replacement cartridge is an ideal choice for the value conscious consumer. The cartridge should be changed every 6 – 12 months or upon noticeable pressure reduction. 5 Micron gradient density melt blown polypropylene construction. To provide perspective to the 5 micron sediment entrapment rating it is important to note the naked human eye can see down to 20 micron and a human hair is 100 microns in diameter.

Also included are 4 RGAP801-AP802 water filter o-rings. These are made of NSF approved Nitrile rubber also known as Buna-N. It is important to change your o-ring at regular intervals to ensure a reliable water tight seal between the filter head and filter sump. It is recommended to keep a spare o-ring to avoid an urgent situation.

This convenient package includes (4) KleenWater KW810 grooved cartridges and (2) KW101 o-rings. The cartridges are 4.5” (W) X 9.75” (L) and are rated for 5 micron sediment entrapment. These cartridges are designed to fit in the Whirlpool Water Filter WHKF-DWHBB. The raised groove designed has a very impressive surface area which prolongs the service life of the cartridge. The KW810 cartridge is compatible to the Whirlpool Model WHKF-WHPLBB and Filtrete Model 4WH-HDGR-F01. Replace cartridge every 6 months or upon substantial pressure reduction. The KleenWater KW810EC features plastic end caps with gaskets and a raised ridge grooved design which provides a significant increase in surface area. The o-rings are constructed of nitrile Buna rubber and will fit Whirlpool Model WHKF-DWHBB.

The O-RING-SET contains 3 pieces of 3.5 in. O.D. standard industry size O-RING use to prevent leaks when customer need to change 3 pre-filter of 10 in. standard under sink reverse osmosis system. Recommend to change all O-RINGs once open the housing. Lubricate with clean lubricant and place in grooves below thread to prevent water leaks.

APEC Water Systems does not distribute or sell our products to any 3rd party sellers on Amazon. Please purchase genuine APEC Water system product in “new” condition from Amazon.Com or APEC Water directly for authenticity. Manufacture warranty may not apply in all cases, depending on factors such as use of product, where the product was purchased, or whom you purchased the product from. Please review the warranty carefully and contact APEC Water if you have any question.

The 68898-32 (also called 68898-31) replacement o-rings are compatible with 3M AP801, 3M AP801-C, 3M AP802, KemFlo 5000 Series, KemFlo 10,000 Series Water Filters. It is recommended to replace the o-ring with every 3rd filter change to prevent leaks.

What to expect:
This item includes three (3) O-Rings in a resealable zip-top poly bag with “Captain O-Ring” branded packaging.

Manufactured and warrantied against defect for one year by Captain O-Ring LLC. “Captain O-Ring” is a registered trademark of Captain O-Ring LLC.

Kinetic Wares supplies quality replacement parts for home water systems. This 6 pack is compatible with GXWH01C, CXWH08C, GXWH04F, GXWH20F, GXWH20S, GXRM10 & GX1S01R, 2.5” GE water filter housings.

Conclusion

By our suggestions above, we hope that you can found replacement oring for water filter for you.Please don’t forget to share your experience by comment in this post. Thank you!