homekitchenart 
Nowadays, there are so many products of small water filter housing in the market and you are wondering to choose a best one. You have searched for small water filter housing in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings small water filter housing which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
Geekpure Filter Housing 10" for Reverse Osmosis System -1/4 Inch Inlet/Outlet-for 2.5 Inch x 10 Inch Fitlers
- Replacement housing for Geekpure RO system,Widely used in RO system or pre-filtration.
- Fit with most RO systems using standard 10″ filters.But different brand,the injection mould is totally different,NOTE:PLEASE REPLACE HEAD AND HOUSING BODY TOGETHER.
- INLET-OUTLET-1/4″ female threaded in and out fittings.matched quick fitting ASIN:B078VQN6TZ .
- SIMPLE INSTALLATION-Easy to replace.Food grade Polyethylene will not cause pollution to water.
- Pack of 3. 1 x Filter housing , 2 x O rings . matched wrench ASIN: B07D9JWRYQ .
Pentek 158643 3/8" #10 3G Slim Line Clear Filter Housing with Bracket and Pressure Relief
- Slim filter housing for low-flow applications with space restrictions
- Clear styrene-acrylonitrile (SAN) for on-site viewing of flow and cartridge condition
- Holds a 10″ x 2-1/2″ sediment or carbon filter cartridge (sold separately)
- Pressure relief button for easier cartridge replacement
- Initial pressure drop of 2 psi at a flow rate of 5 gpm
This Pentek 158643 3/8″ #10 3G Slim Line clear filter housing with integrated mounting bracket and pressure relief is suitable for low flow rate applications that have space restrictions. The sump is made of clear styrene-acrylonitrile (SAN) for on-site viewing of flow and cartridge condition, and the cap is made of reinforced blue polypropylene for strength and resistance to chemicals. The cap has 3/8″ female National Pipe Thread Taper (NPT) threaded input and output connections and a nitrile butadiene rubber (Buna-N) O-ring to ensure a watertight seal. A pressure relief button on the inlet side of the cap releases pressure in the housing for changing filter cartridges. The housing can be used with a 10″ x 2-1/2″ sediment or carbon filter cartridge (sold separately). It has an initial pressure drop of 2 pounds per square inch (psi) at a flow rate of 5 gallons per minute (gpm), a maximum operating pressure of 125 psi, and a maximum operating temperature of 125 degrees F (51.7 degrees C). This filter housing meets National Sanitation Foundation/American National Standards Institute (NSF/ANSI) standard 42 for quality assurance, and is for use in various applications, including residential drinking water filtration, food service, and humidifying systems, among others.
Specifications
| Filter cartridge size (H x W) (sold separately) | 10 x 2-1/2 inches (254 x 63.5 mm) |
| Initial pressure drop at 5 gpm | 2 psi |
| Maximum temperature | 125 degrees F (51.7 degrees C) |
| Maximum pressure | 125 psi |
| Maximum dimensions (H x W) | 13-3/8 x 5-3/8 inches (340 x 137 mm) |
| Materials and structural integrity certification | NSF/ANSI standard 42 |
H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.
Water filters remove undesirable particles, chemicals, and microorganisms from water by means of a semipermeable barrier, adsorption, or biological processes. They are made of densely packed synthetic or natural fibers that trap suspended particles, materials that block microbes or adsorb unwanted chemicals, or substances that cause a chemical change, such as acid neutralization. For most residential, commercial, and industrial applications, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings. Filtration systems typically consist of a series of two or more types of filters, each designed to remove different contaminants. The performance of filters is measured by the minimum particle size that is blocked, the percentage of particles or microorganisms that are removed, the downstream concentration of unwanted chemicals, the maximum flow rate, and the amount of water that can be filtered before the filter must be replaced. Water filters are used in a wide range of applications, including drinking water purification, swimming pools, industrial processes, and irrigation, among others.
Pentair manufactures industrial, commercial, and residential water filtration components and systems. The company, founded in 1966 and headquartered in Minneapolis, MN, meets International Organization for Standardization (ISO) standards 9001 and 14001 for quality assurance.
Similar items with 4 stars and above
APEC Water Systems Set 3 Pcs 3.5" O.D. Replacement O-Ring for Reverse Osmosis Water Filter Housings
- IMPORTANT: A set of 3 O-rings for standard filter housings of APEC ESSENCE Series RO systems purchased BEFORE 6/1/2013 and AFTER 6/30/2019. ULTIMATE Series RO systems purchased BEFORE 5/1/2015 and after 6/30/2019
- Light weight, easy install and unload
- Diameter 3.5 inch OD
The O-RING-SET contains 3 pieces of 3.5 in. O.D. standard industry size O-RING use to prevent leaks when customer need to change 3 pre-filter of 10 in. standard under sink reverse osmosis system. Recommend to change all O-RINGs once open the housing. Lubricate with clean lubricant and place in grooves below thread to prevent water leaks.
APEC Water Systems does not distribute or sell our products to any 3rd party sellers on Amazon. Please purchase genuine APEC Water system product in “new” condition from Amazon.Com or APEC Water directly for authenticity. Manufacture warranty may not apply in all cases, depending on factors such as use of product, where the product was purchased, or whom you purchased the product from. Please review the warranty carefully and contact APEC Water if you have any question.
Aquaboon Big Blue 4.5 x 20" Whole House Well Water Filter System with Pressure Release (1" Port) | Certified According to FDA | Compatible with Pentek 150233, 150235, Geekpure BB-20B
- [HIGH QUALITY] Water filter house system is a large capacity housing suitable for high-flow and heavy-sediment applications. The opaque sump is strong and resistant to chemicals as it is made of polypropylene. The black cap is made of high-flow polypropylene (HFPP) for stiffness. Whole house is not a single place to use it. The item is appropriate for well water, commercial and industrial filtration.
- [SAFETY AND EASE OF USE] The product is designed to provide security and ease of use. The water will not get outside the system due to a Double O-ring it has. Filter cartridges can be changed with the help of the pressure release button you can find on the inlet side of the cap. 1 whole house water filter housing fits FDA standard and has a long lifetime.
- [BIG BLUE HOUSING] The housing accepts 20” x 4. 5” water filter cartridges (sold separately). Besides, you can choose 20” ones of other brand names like Geekpure, iSpring, Ronaqua, Hydronix, Pentek.
- [COMPATIBLE SYSTEMS] SimPure RSWHB002Z_S8, OKSLO KTTR7942, Pentek 1″ Big Blue NPT, BBFS-222, 150070, HFPP-1-PR20, HFPP-34-PR-203, 150069, 158129, iSpring HB28BX2, WGB12B, Max Water B078FPN68M, H2O Splash WHBB20T1BL, Ronaqua LEPAC10541, H-H201BBE, Hydronix HX-HF45-20BLBK10, Water Filters Depot (WFD) H-20BB-1PR.
- [COMPATIBLE FILTERS] Pentek DGD-5005-20, S1, RFC20-BB, 84634, Watts FM-BB-20-20, Dupont HDC3001, NCP-20BB, DGD-2501-20, S1-20BB, Hydronix CB-45-2005, Harmsco HB-20-5W, Ametek CP5-BB, S1-BB, SDC-45-2005, ECP1-20BB, FreshWaterSystems PS-45097-05, Cuno CFS210-2, Flow-Max FM-BB-10-5, AquaPure AP810-2, WB-HB-20-5W, Ace Hardware 4021341, ECP5-20BB, ECP20-20BB, iSpring FP120x25, Heritage Parts TMP5618907, SPC-45-2020, HB-20-20W, WPX100BB20P, 84647.
AQUABOON WHOLE HOUSE WATER FILTRATION SYSTEM
Well whole house water filter system provides you with large capacities of clean and healthy water. You will get it to your sink, bath and shower. It is particularly essential if you have infants to take proper care of.
4.5 x 20 whole house water filter housing has the following characteristics:
• The black cap has 1” female National Pipe Thread Taper (NPT) • threaded input and output connections;
• Rated for pressures up to 90PSI (6. 20 bar);
• Bracket and screws are included.
• If your family consumes a large amount of water simultaneously, the water filters whole house big blue is for you.
Compatible systems:
Geekpure BB-20T, Pentek BBFS-222, Premier Water Systems 4520WHFH2PK, WF45-20-1NPT.
Compatible cartridges:
FreshWaterSystems PS-45200-05, 155360-43, 255494-43, PBB-P20-5, FC25B, SPC-45-2005, WB-HB-20-20W, Wholesale Market LLC BBCTO-20B4, B01AR1SE7M, PureWater 4520-inline-birm, KW4520BR-50M-Qty1, KW4520SW-20, Micron-Qty3-KW101-Qty1, SPC-45-2050, 255495-43, 155312-43, Pelican SWC-45-20100, Geekpure BC20-BB-5, BC20-BB-5X4, Everpure DEV910837, R110WELLBB, APPLIED MEMBRANES INC. H-F4220AC, WPC20FF20, CTO-20B6, PPCTO-20B4, Water Filters Depot (WFD) WF-SW2020-BB, WF-CB205-BB, US Water Systems 550-USWPF-2510-05, Tier1 P20-20BB, TIER1-DGD1-20BB, TIER1-RFC-20BB, Ronaqua 10S-20BB5, 2C-20BB, 4pcs, 6C-20BB, OmniFilter RS-15, TO3-DS3-S18, KleenWater KW4520BR-50M-Qty(4), FP120X2, 2PP20BB1M.
Similar items with 4 stars and above
Superb Wrench SPBW-8 Metal Water Filter Housing Wrench (6 inch Inside Diameter)
- Inside Diameter: 6 Inches
- Replaces the plastic SW-4 wrench
- Fits: SW-4, American Plumber W2010-PR, 152015, W2015-PR, 152017, 152022, 144368, Pentek 144368, 150237, 150239, 150469, BBFS-22, Ametek Kleen Plus 144368, Culligan 144368, Whirlpool WHKF-DWHBB, Whirlpool WHCF-DWHBB and Keystone
- Handle is rubberized and longer than a standard filter wrench which gives you extra leverage
- Made in the USA.
DuPont WFPF13003B Universal Whole House 15,000-Gallon Water Filtration System
Pentek 150071 3/4" #10 Standard Clear Filter Housing with Pressure Relief
- Standard filter housing for residential, commercial, and industrial applications
- Clear styrene-acrylonitrile (SAN) for on-site viewing of flow and cartridge condition
- Holds a 10″ x 2-1/2″ sediment or carbon filter cartridge (sold separately)
- Pressure relief button for easier cartridge replacement
- Initial pressure drop of 1 psi at a flow rate of 10 gpm
This Pentek 150071 3/4″ #10 Standard clear filter housing with pressure relief is suitable for residential, commercial, and industrial applications. The sump is made of clear styrene-acrylonitrile (SAN) for on-site viewing of flow and cartridge condition, and the cap is made of reinforced blue polypropylene for strength and resistance to chemicals. The cap has 3/4″ female National Pipe Thread Taper (NPT) threaded input and output connections and a nitrile butadiene rubber (Buna-N) O-ring to ensure a watertight seal. A pressure relief button on the inlet side of the cap releases pressure in the housing for changing filter cartridges. The housing can be used with a 10″ x 2-1/2″ sediment or carbon filter cartridge (sold separately). It has an initial pressure drop of 1 pound per square inch (psi) at a flow rate of 10 gallons per minute (gpm), a maximum operating pressure of 125 psi, and a maximum operating temperature of 125 degrees F (51.7 degrees C). This filter housing meets National Sanitation Foundation/American National Standards Institute (NSF/ANSI) standard 42 for quality assurance, and is for use in various applications, including residential drinking water filtration, food service, and humidifying systems, among others.
Specifications
| Filter cartridge size (H x W) (sold separately) | 10 x 2-1/2 inches (254 x 63.5 mm) |
| Initial pressure drop at 10 gpm | 1 psi |
| Maximum temperature | 125 degrees F (51.7 degrees C) |
| Maximum pressure | 125 psi |
| Maximum dimensions (H x W) | 12-5/8 x 5-1/4 inches (321 x 133 mm) |
| Materials and structural integrity certification | NSF/ANSI standard 42 |
H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.
Water filters remove undesirable particles, chemicals, and microorganisms from water by means of a semipermeable barrier, adsorption, or biological processes. They are made of densely packed synthetic or natural fibers that trap suspended particles, materials that block microbes or adsorb unwanted chemicals, or substances that cause a chemical change, such as acid neutralization. For most residential, commercial, and industrial applications, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings. Filtration systems typically consist of a series of two or more types of filters, each designed to remove different contaminants. The performance of filters is measured by the minimum particle size that is blocked, the percentage of particles or microorganisms that are removed, the downstream concentration of unwanted chemicals, the maximum flow rate, and the amount of water that can be filtered before the filter must be replaced. Water filters are used in a wide range of applications, including drinking water purification, swimming pools, industrial processes, and irrigation, among others.
Pentair manufactures industrial, commercial, and residential water filtration components and systems. The company, founded in 1966 and headquartered in Minneapolis, MN, meets International Organization for Standardization (ISO) standards 9001 and 14001 for quality assurance.
Pentek 150237 #10 Big Blue Filter Housing, 1" Female NPT Inlet/Outlet
- Large filter housing for high-flow and heavy sediment applications
- Reinforced polypropylene sump for strength and chemical resistance
- Use with a 10” x 4-1/2” filter cartridge (sold separately)
- Pressure relief button for easier cartridge replacement
- Initial pressure drop of 1 psi at a flow rate of 15 gpm
This Pentek 150237 1” #10 Big Blue filter housing with pressure relief is suitable for high-flow and heavy sediment applications. The opaque blue sump is made of reinforced polypropylene for strength and resistance to chemicals, and the black cap is made of high-flow polypropylene (HFPP) for stiffness. The black cap has 1” female National Pipe Thread Taper (NPT) threaded input and output connections and a nitrile butadiene rubber (Buna-N) O-ring to ensure a watertight seal. A pressure relief button on the inlet side of the cap releases pressure in the housing for changing filter cartridges. The housing can be used with a 10” x 4-1/2” filter cartridge (sold separately). It has an initial pressure drop of 1 pound per square inch (psi) at a flow rate of 15 gallons per minute (gpm), a maximum operating pressure of 100 psi, and a maximum operating temperature of 100 degrees F (37.8 degrees C). This filter housing meets National Sanitation Foundation/American National Standards Institute (NSF/ANSI) standard 42 for quality assurance, and is for use in various high-flow applications, including residential drinking water filtration, food service, and irrigation, among others.
Specifications
| Filter cartridge size (H x W) (sold separately) | 10 x 4-1/2 inches (254 x 114 mm) |
| Initial pressure drop at 15 gpm | 1 psi |
| Maximum temperature | 100 degrees F (37.8 degrees C) |
| Maximum pressure | 100 psi |
| Maximum dimensions (H x W) | 13-1/8 x 7-1/4 inches (333 x 184 mm) |
| Materials and structural integrity certification | NSF/ANSI standard 42 |
H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.
Water filters remove undesirable particles, chemicals, and microorganisms from water by means of a semipermeable barrier, adsorption, or biological processes. They are made of densely packed synthetic or natural fibers that trap suspended particles, materials that block microbes or adsorb unwanted chemicals, or substances that cause a chemical change, such as acid neutralization. For most residential, commercial, and industrial applications, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings. Filtration systems typically consist of a series of two or more types of filters, each designed to remove different contaminants. The performance of filters is measured by the minimum particle size that is blocked, the percentage of particles or microorganisms that are removed, the downstream concentration of unwanted chemicals, the maximum flow rate, and the amount of water that can be filtered before the filter must be replaced. Water filters are used in a wide range of applications, including drinking water purification, swimming pools, industrial processes, and irrigation, among others.
Pentair manufactures industrial, commercial, and residential water filtration components and systems. The company, founded in 1966 and headquartered in Minneapolis, MN, meets International Organization for Standardization (ISO) standards 9001 and 14001 for quality assurance.
Geekpure 10 Inch Big Clear Water Filter Housing for Whole House Water Filtration with Wrench and Bracket 1 Inch Inlet Outlet-4.5 x 10 Inch – Clear Color (Pack of 1)
- Complete set 10 inch big clear housing,1″NPT inlet/outlet,with plastic wrench,screw and metal bracket.
- Fits all standard sized 4-1/2 inch diameter industry 10 inch whole house cartridges.Fits NSF standard,Large capacity housing for high flow applications.
- It is Installed at the main water supply and produce pure water for your entire home. Enjoy better water from every tap and every appliance in the whole house.
- ADVANTAGE-clear housing allows you to see when you need to change filters and everything else works as it should.
- Pack of 1,Filter housing only, filter cartridges are sold separately .
10 inch Transparent Standard Water Filter Housing, Presser Relief Button, 3/4” Inlet/Outlet Brass Port, Accepts Standard 10”x 2.5” Cartridges, 3/4” Brass Port, Mounting Hardware Included (2 Sets)
- ???? DURABLE STRUCTURE: 10” Transparent Standard Housing is proper for heavy sediment applications. The housing body is made of reinforced polypropylene for strength and resistance to chemicals, and the blue cap is made of high-flow polypropylene for toughness. The cap has 3/4″ inlet / outlet brass ports which allowed better sealed connections to the corresponding pipes
- ???? POINT OF USE: Those Housings for use in various high-flow applications and is usually placed in the main water line entering the house including, but not limited to residential drinking water filtration, well water filtration, food service, and irrigation. Extends life of Washing Machines, Water Heaters & Other Household Appliances Removing Chlorine, Taste, Odors & Other Particles
- ???? EASY TO OPERATE: There is rubber O-ring on the top of the housing body to ensure a watertight seal. A pressure relief button on the inlet side of the cap releases pressure in the housing for changing filter cartridges. Unique cap design allow quickly and easy to remove housing to replace cartridges. Transparent housing body allows visually to determine when cartridge should be changed
- ????ACCEPTS 10” Standard Cartridges: Dupont PFC5002, WFPFC5002, Pentek DGD Series, 3M CFS110, CBC-10, Aqua Pure AP110, AP51T, Hydronix SGC-25-1005, Culligan P5, D-10A, OmniFilter RS14-SD, GE FXUSC, Aquaboon 25S-5M, Manitowoc K-00173, Whirlpool WHKF-GD05, WHA2BF5, American Plumber W5P, Watts Premier MAXETW-975, WCBCS975-RV, SCWH-5, Tier1 EP5_10, EcoPure EPW2C, Purenex C-5M, KleenWater KWGE25RG, Omnipure OMB934-5M, WFPFC9001, MatriKX E32-250-125-975, DEV9108-15, iSpring FC15 (Sold Separately)
- ???? WELL-MATCHED FOLLOWING HOUSINGS SYSTEMS: DuPont WFPF38001C, WFPF13003B, Pentek 158643 3/8, Culligan WTR Filter HF-360A and HF-150A, American Plumber WC34-PR, Geekpure RO5-FH10, Hydronix HF3-10CLBK34, EcoPure EPW2
Similar items with 4 stars and above
Conclusion
By our suggestions above, we hope that you can found small water filter housing for you.Please don’t forget to share your experience by comment in this post. Thank you!
