homekitchenart 
Nowadays, there are so many products of thermaltake liquid cooling 240 in the market and you are wondering to choose a best one. You have searched for thermaltake liquid cooling 240 in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings thermaltake liquid cooling 240 which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
Thermaltake Floe Dual Ring RGB 240 TT Premium Edition PWM TR4 AM4 LGA2066 Ready AIO Liquid Cooling System 240mm High Efficiency Radiator CPU Cooler CL-W157-PL12SW-A
- Supports Intel LGA 2066/2011 3/2011/1366/1156/1155/1151/1150
- Supports AMD TR4/AM4/FM2/FM1/AM4/AM3+/AM3/AM2+/AM2 (CPU Socket)
- 12 Separately Controlled RGB LEDs for unrivaled Lighting Control
- Patented Ring Plus RGB Software Enabled : Changes the light modes, colors, speeds, brightness, fan speeds, and even supports AI voice control in iOS and Android devices
- 240 mm High Efficiency Radiator with Push/Pull Mounting Support
- Exclusive RGB LED Water block, which has 6 LED’s and doubles to match the 12 LED from fans to offer same “Look”
- Simple Setup
- Tt LCS Certified: Liquid Cooling Supported
- Compatible with extreme liquid cooling configurations
Thermaltake Floe Dual Ring RGB 240 TT Premium Edition PWM TR4 LGA2066 Ready AIO Liquid Cooling System CPU Cooler CL-W157-PL12SW-A
The Floe Riing RGB 240 TT Premium Edition is the world’s first 16.8 million colors liquid CPU cooler with two 120mm Riing Plus RGB fans and a LED waterblock. This cooler series features its extraordinary performance and superior quality. The large surface radiator plus high-performance waterblock and pump guarantees ultimate CPU cooling. Besides, the waterblock and the fans are manufactured with multiple addressable LEDs that can be controlled by the patented TT RGB PLUS Software and AI interactive voice control. Functions within the software also allow users to monitor fan performance and track CPU temperature. Enjoy better cooling performance and greater CPU protection with one simple upgrade!
Radiator: Dimension:270 x 120 x 27 mm
Compatibility: Intel LGA 2066/2011-3/2011/1366/1156/1155/1151/1150, AMD
TR4/AM4/FM2/FM1/AM3+/AM3/AM2+/AM2, *AIO Cooler bracket adapter comes in the AMD Threadripper CPU box.
Water Block: Material:Copper
Pump
Rated Voltage:12 V/ 5V
Rated Current:325 mA / 0.4A
Motor Speed:3600 R.P.M
Fan
Dimension:120 x 120 x 25 mm
Speed:500~1400 RPM
Noise Level:19.8~24.7 dB-A
Rated Voltage:12 V
Max. Air Flow:14.2~42.34 CFM
Max. Pressure:0.17~1.54 mm-H2O
Connector:5 pin
Tube
Length: 326 mm
Material: Rubber
Weight: 1355g
Similar items with 4 stars and above
Thermaltake Pacific M240 D5 Res/Pump PETG Hard Tube Water Cooling Kit CL-W216-CU00SW-A
- W3 Water Block: 0.15mm internal fin construction, a copper base with anti-corrosive nickel plating and high-quality PMMA cover, and a universal mounting mechanism
- PR15-D5 Res/Pump Combo: Featuring exceptional performance and unrivalled reliability, the PR15-D5 is manufactured from high quality POM and PMMA material to provide a high performance solution
- R240 Radiator: Manufactured from high-quality German aluminum alloy and aerospace-grade materials, this radiator provides exceptional performance
- Ring 12 RGB Radiator Fan: 3 patented circular 256 multicolored 120mm RGB radiator fans with high-static pressure design, one smart fan controller included
- C-Pro Compression Fitting: With special four rubber O-rings leak-free design and patented structure for ultimate loop management. 8 compression fittings are included in the kit
The Pacific M240 D5 Hard Tube Water Cooling Kit is an efficient, yet quality liquid cooling solution for all water-cooled gaming systems. Inside you will find a W3 CPU water block, PR15-D5 pump/reservoir combo, R240 radiator, C1000 Pure Clear coolant, 3 Ring 12 RGB fans, 8 C-Pro compression fittings, 2 adapter fittings, 4 PETG hard tubes and other accessories. 2 year warranty.
P/N: CL-W216-CU00SW-A
Dimension: 518(L) x 198 (W) x 223 (H)
Compatibility: Intel LGA 2066/2011/1366/1156/1155/1151/1150/775
AMD AM4/FM2/FM1/AM3+/AM3/AM2+/AM2(CPU Socket)
Components Dimension
Pump & Reservoir:228.1H) x 87.4(W) x 94.2(L) mm
Radiator : 39.9 (H) x 120.7 (W) x 273 (L)
Tube Dimension: OD : 16mm , ID : 12mm , L : 500mm
Fan Spec: 1500 RPM (1000RPM with LNC)
Coolant: Pure Clear Coolant
Kit Contents
CPU Water Block
– Pacific W3 CPU Water Block x1
Pump/Reservoir
– Pacific PR15-D5 Pump/Reservoir Combo x1
Radiator
– Pacific R240 Radiator 39.9 (H) x 120.7 (W) x 273 (L) mm x1
Fittings
– Pacific C-Pro G1/4 PETG 16mm OD Compression – Chrome x6
– Pacific G1/4 90 Degree Adapter – Chrome x2
Fan
– Riing 12 LED RGB 3 Pack x1
Coolant
– Thermaltake C1000 Pure Clear Coolant x1
Tube
– V-Tubler PETG Tube 16mm OD 500mm 4Pack x1
Accessory
– Silicone Insert 900mm Tt Premium Edition
– Intel and AMD Universal Backplated & Mounting Kit
– 24pin ATX Bridge Tool x1
– Thermaltake Thermal Grease x1
Similar items with 4 stars and above
Thermaltake Pacific C360 Ddc Res/Pump 5V Motherboard Sync Copper Radiator Soft Tube Water Cooling Kit CL-W253-CU12SW-A
- Analog/digital lighting – Analog lighting allows a selection of 7 lighting effects with the included a RGB Controller. Connect lights to select 5V RGB Capable motherboards TO utilize digital lighting schemes from as US aura Sync, Gigabyte RGB FUSION, MSI Mystic Light Sync, and ASROCK polychrome Sync
- All includded – the C360 soft tube Kit contains a CPU water block, pump/reservoir, radiator, fans, fittings, tubing, and coolant, which are components necessary to complete a CPU water cooling loop
- Slim copper radiator – the C360 is engineered with 12 copper flat tubes and 17 fins per Inch. This radiator’s 27mm thick design assures fitment compatibility with most form Factor chassis
- Exclusive components – W4 a RGB Edition water block, T1000 pure Clear Coolant, and a new pr15-ddc pump/reservoir combo
- 2 years
Thermaltake Pacific C360 DDC soft tube Water cooling kit is designed for users who likes an efficient and high-quality Combo kit that is ready to sync with 5V RGB Capable motherboards from Asus, Gigabyte, MSI and as rock. The kit includes three pure 12 a RGB sync radiator fans, a Pacific W4 a RGB CPU water block, Pacific pr15-ddc pump/reservoir Combo, Pacific C360 radiator, a bottle of T1000 transparent coolant pure Clear, six Pacific 1/2” Id x 3/4” Od compressions, two meters of V-Tumbler 4T 1/2’‘(12. 7mm) ID x 3/4’‘(19mm) OD transparent tube, an a RGB LED controller, and other accessories. dimension: 520 (L) x 200 (W) x 232 (h)compatibility: intel LGA 2066/2011/1366/1156/1155/1151/1150/775amd AM4/FM2/FM1/AM3+/AM3/AM2+/am2(cpu socket)components Dimension: pump & reservoir: 86. 54 (L) x 62 (W) x 140. 1 (H) mm copper radiator: 29. 5 (H) x 119 (W) x 399 (l) mm tube Dimension: od: 16mm, ID: 12mmfan spec: pwm 5001500 RPM, ( a RGB Controller or 5V MB a RGB sync )coolant: T1000 coolant pure clear kit contents: cpu water block – Pacific W4 a RGB CPU water block x1pump/reservoir- Pacific pr15-ddc pump/reservoir Combo x1copper radiator- Pacific C360 radiator 29. 5 (H) x 119 (W) x 399 (l) mm x1argb fan- pure 12 a RGB sync radiator fan TT Premium Edition x3- a RGB LED controller fittings – Pacific 1/2” Id x 3/4” Od compression – Black x6- Pacific G1/4 90 degree adapter – Black x2coolant- Thermaltake T1000 coolant pure Clear x1 tube- V-Tumbler 4T 1/2’‘(12. 7mm) ID x 3/4’‘(19mm) transparent tube x2 meters accessory- Intel and AMD universal Back Plated & mounting kit- 24pin ATX bridge tool x1- Thermaltake thermal grease x1
Similar items with 4 stars and above
Thermaltake WATER 3.0 Dual Riing RGB High Static Pressure Fans 240 AIO Water Cooling System CPU Cooler CL-W107-PL12SW-A
- Triple LED RGB effect cooling fans with smar fan controller: 2 X 120mm RGB radiator fans with high static pressure design for superior cooling performance. Thermaltake smart fan controller can play/pause 5 LED color modes and cycle through 256 colors
- T: 240mm RADIATOR doubles the cooling surface and supports 4x 120mm fans
- High performance copper base plate accelerates the heat conductivity. The pre-refilled coolant reduces any stress from liquid replenishment hassle
- High quality pup: Thermaltake provides the most reliable pump enables the maximum amount of water circulation, keeping the copper plate continuously cool. The low evaporation tube effectively
- Warranty: 3 years
Thermaltake Water 3.0 Riing RGB 240 Edition PWM AIO Tt LCS Certified Liquid Cooling System 3 Year Warranty CL-W107-PL12SW-A
Take your CPU to new heights with the Thermaltake Water 3.0 Riing RGB 240 Edition AIO Enthusiast Liquid Cooling System. From stock to overclock, the Water 3.0 Riing RGB Series fits the needs for CPU cooling performance with minimal maintenance for an all-in-one solution. With a high performance copper base plate, Patented Riing RGB LED Fans, universal socket compatibility and 240mm large surface radiator, gain up to 3X in cooling performance over stock CPU coolers. Experience extreme cooling performance and low noise to protect your most vital component from heat with the Water 3.0 Riing RGB Edition from Thermaltake.
Key Features:
- Patented PWM Riing 12 RGB LED Fans
- 240mm Aluminum Radiator
- Sleeved Tube with Copper Cold Plate
- Maintenance Free Operation
- 3 Year Warranty
Compatibility:
Intel LGA 2011-3/2011/1366/1156/1155/1151/1150
AMD FM2/FM1/AM3+/AM3/AM2+/AM2
Water Block:
Material Copper
Pump:
Rated Voltage: 12 V
Rated Current: 175 mA
Fan:
Dimension:120 x 120 x 25 mm
Speed:800 ~ 1500 R.P.M
400 ~ 1000 R.P.M (Low Noise Mode)
Noise Level:18.5 ~ 26.4 dB-A
Rated Voltage:12 V
Max. Air Flow:22.14 ~ 40.6 CFM
Max. Pressure:0.57 ~ 2.01 mm-H2O
Connector:4 pin
Radiator:
Dimension:270 x 120 x 27 mm
Tube:
Length:326 mm
Material:Rubber
Weight 1071g
Similar items with 4 stars and above
Thermaltake 240mm Pacific DIY Liquid Cooling System R240 Radiator Cooling CL-W009-AL00BL-A
- Optimized Heat Dispatching: Thermaltake R Series Radiators deliver an average heating load of 32℃-35℃. After brazing, the fin and tube connect to form a joint, thereby creating uniform heat transfer.
- Slim Form Factor Design: R Series is a slim radiator with a 13-set flat tube design to increase heat transfer. Water flows down on one side, and then circulates back to the other side of the radiator.
- High-Density Fin Design: The cooling performance improves significantly with increased fan speed, offering exceptional cooling performance during operation. FPI (fin per inch): 17.
- German-Made Anti-Corrosion Materials: Designed with German aerospace-grade materials and constructed with zinc. Corrosion potentials of aluminum alloy with zinc can be reduced by 55.6% after brazing.
The Thermaltake Pacific R240 introduces high-quality radiators to deliver outstanding water cooling performance for the enthusiast’s PC. Manufactured from high-quality German aluminum alloy and aerospace-grade materials, configurations of 240mm to provide exceptional performance. Integrated G1/4″ threads make it easy to install, while rigid connections ensure leak-resistant measures are in place. With an ideal mounting, fitting and flow set-up, the Thermaltake Pacific R Series meets your cooling needs in every way. 2 Year Warranty.
Similar items with 4 stars and above
Thermaltake Pacific DIY Liquid Cooling System CL360 64mm Thick Copper Radiator CL-W191-CU00BL-A
- More Rows for More Cooling: Built to perform, this 64mm thick radiator offers a triple-row flat tube design and brass tank for best thermal capacity
- High-Density Copper Fin Design: Designed to accommodate high air volume (Fin per Inch: 14)
- Stainless Steel Frame: Engineered with stainless steel side panels that increase the durability and strength of the radiator while reducing the weight
- Optimized Heat Transfer: Optimized for efficiently pulling heat away from cycling coolant thus achieving maximum heat dissipation at both low and high airflow operation
- High-Quality Manufacturing Process: Baked through a controlled atmosphere soldering line. Materials melt into each other to accomplish optimal thermal transfer from the tubes to the actual fins
Available in 480mm, 420mm and 360mm sizes, Thermaltake Pacific CL radiators are a high-performance copper radiator series with high-density copper fin design and brass tank. Built for 120mm/140mm high-static pressure fans, these radiators are manufactured from premium-quality materials to provide exceptional performance and unrivalled reliability. Constructed with stainless steel side panels guarantees the durability as well as reducing the weight of the radiator. Integrated G1/4″ threads make it easy to install, while rigid connections ensure leak-resistant measures are in place. With an ideal mounting, fitting and flow set-up, the Pacific CL Series meets your cooling needs in every way. 2 year warranty.
Similar items with 4 stars and above
Thermaltake Pacific Riptide 360 Pro D5 Res/Pump PETG Hard Tube Water Cooling Starter Kit CL-W121-CA12RE-A
- Not ready for the deep end just yet? Wade in the shore lines with the Reef 240, which gives you all the basic necessities to get your feet wet and your CPU cool.
- RADIATOR: High-density fin design (FPI: 14), the 240mm radiator is optimized to accommodate high airflow and high air pressure with increased capacity.
- W2 CPU WATER BLOCK: The LED CPU water block is constructed with a copper base and LED Backlighting to provide exceptional heat transfer and cooling performance. Fits all modern CPU sockets.
- PR22-D5 w/ SILENT KIT RESERVOIR PUMP COMBO: The 300ml reservoir and D5 pump to provide the perfect combination for proper water cooling circulation and capacity.
- A COMPLETE KIT: Including (6) PETG Compression, (2) 90° Adapters and (1) Dual Compression 90° fittings, 2 Packs of 4 x 500mm PETG Hard Tubes
The Riptide 360 Pro takes you for a ride into common waters with a 360mm (3x120mm) radiator to offer users proper CPU cooling performance with limited cooling expansion. Ideal for dedicated CPU cooling performance, take on today’s CPU cooling demands and dive deeper into your gaming with unrivaled custom loop presentation.
Similar items with 4 stars and above
Thermaltake Pacific RL240 D5 Hard Tube Water Cooling Kit with 2X Riing 120 mm Hi Static Pressure Red LED Fan – Black
- Tt LCS Certified – “Tt LCS Certified” is the hallmark that ensures a first-class performance from the best features and fitments. A certification exclusive to Thermaltake
- Pacific W1 CPU Water Block – The W1 CPU water block is constructed with a copper base and anti-corrosive nickel plating to provide exceptional heat transfer and cooling performance
- Pacific PR22-D5 Pump/Reservoir Combo – The PR22-D5 includes a 300ml reservoir and D5 pump to provide the perfect combination for proper water cooling circulation and capacity
- Pacific RL240 Radiator – With high-density fin design (FPI: 14), the 240mm radiator is optimised to accommodate high airflow and high air pressure with increased capacity
- Pacific G1/4 PETG Tube 16mm (5/8”) OD Compression Fittings (Chrome) – Six durable copper compression fittings allow proper connection to the G1/4” ports to properly secure to the cooling components.
Thermaltake Pacific RL240 D5 Hard Tube Water Cooling Kit As part of its “hard-core” spirit towards the ultimate in custom PC water cooling, Thermaltake has launched the new Pacific RL240 D5 Hard Tube Water Cooling Kit. The kit is composed of one Pacific W1 CPU water block, one Pacific PR22-D5 pump and reservoir combo, one Pacific RL240 radiator, four V-Tubler PETG tubes, six Pacific G1/4 compression fittings (chrome), two Riing 12 LED red fans, one C1000 Opaque coolant red and other accessories. Together, these provide exceptional performance, unrivalled reliability, and styling to enthusiasts.
Thermaltake Pacific DIY LCS RL240 D5 Red/Pump Red Luna Fan Water Cooling Kit CL-W063-CA00BL-A
- As part of its ‘hardcore’ spirit towards the ultimate in custom PC water cooling, Thermaltake has launched the new Pacific RL240 Water Cooling Kit which provides exceptional performance and reliability. It also comes with the 2 years warranty.
- Pacific W1 CPU Water Block: The W1 CPU water block is constructed with a copper base and anti-corrosive nickel plating to provide exceptional heat transfer and cooling performance. Fits all modern CPU sockets.
- Pacific PT40-D5 Reservoir/Pump Combo: The PT40-D5 includes a 220mm reservoir and D5 pump to provide the perfect combination for proper water cooling circulation and capacity, manufactured from high quality POM and PMMA material.
- Pacific RL240 Radiator: With high-density fin design (FPI: 14), the 240mm radiator is optimized to accommodate high airflow and high air pressure with increased capacity and provides superior cooling performance to all components.
- Pacific 1/2″ ID x 3/4″ OD Compression Fittings (Chrome): Six durable brass compression fittings allow proper connection to G1/4″ ports to properly secure to cooling components.
- Luna 12 LED Red Fan: An efficient and quiet cooling LED fan with anti-vibration mounting system, which strengthens the stability during operation.
- V-Tubler 4T: The V-Tubler 200cm ID 1/2″ (13mm) water tube provides custom PC water cooling configurations with flexibility and durability from end to end.
- Coolant 1000 Red: Pre-mixed red coolant for custom PC water cooling configurations
- prevent corrosion, rust and scaling across every component for a total system solution.
When looking for a complete solution that meets the needs of “Hardcore” enthusiasts, the Thermaltake Pacific RL240 DIY Water Cooling Kit is now here. As a Limited-edition LCS combo kit, Thermaltake provides everything needed to add exceptional performance to your CPU with a DIY style all together. Gain freedom to display and secure your cooling components in endless configurations for a one of a kind presentation. Take your cooling to the next level with the Thermaltake Pacific RL240 DIY Water Cooling Kit.
Similar items with 4 stars and above
Conclusion
By our suggestions above, we hope that you can found thermaltake liquid cooling 240 for you.Please don’t forget to share your experience by comment in this post. Thank you!
