The 9 Best Water Cooling Treatment

As with all of PrimoChill’s high performance cooling system fluids and additives, Liquid Utopia is safe, non toxic, and biodegradable. Liquid Utopia is the only single use additive available in today’s market that provides a broad spectrum of coverage and has the ability to be dyed to your color choice by adding a PrimoChill Intensifier(sold separately). No matter which of the twelve colors you choose, PrimoChill’s Liquid Utopia makes life easy for you, and short for Algae and Corrosion.

********DO NOT MIX WITH THE PRE MIXED PC ICE OR PC PURE********
Warnings/Cautions: * Liquid Utopia is made with earth friendly ingredients and carries a broad spectrum of anti-microbial agents. If you notice white sediment in your loop, it is most likely Liquid Utopia has been hard at work! White sediment may be present for some time, depending on the amount of existing contaminants. Do not mix with any pre-mixed coolants as it will over saturate the inhibitors, this includes Silver Coils as they act as a antimicrobial component.
Tyler Direct is not responsible for any hardware damage. Use at your own risk.

EC6 Protect – Biocide is a highly effective slow release, long life biocide. Simply add to de-ionised water, purified water, or coolant for years of protection against bacterial growth and algae. EC6 Protect can be used in new system to protect against biological growth, or added to an existing system to neutralise bacteria an algae.

• Highly Effective Biocide
• Slow Release and Long Life
• Non-corrosive
• Low Odour
• Non-Foaming
• Low viscosity

Mix with water at a ratio of 6ml per litre. One bottle will treat 5 litres of water.

Do not mix in a higher than recommended ratio. EC6 Coolants already contain EC6 Protect Biocide.

Model: 5060175589613

Primochill Sys Prep was created to address the immense customer requests for a clean and well maintained cooling system. Any successful venture into water-cooling starts with a true cooling loop preparation which can only be achieved by using Sys Prep.
Specifications

Compatibility: Sysprep is compatible with rigid and flexible tubing of all sizes.  It is safe to use on rubber, plastics and acrylics so rest assured all your seals, o-rings, reservoirs and such are all safe!
Instructions
1.Install your cooling loop and double-check connections to ensure loop is “closed”. No Leaks!
2.Empty bottle of SysPrep into 1 US Gallon of fresh DI or Distilled water, and shake for 30 seconds
3.Add mix to cooling loop.
4.Fill loop with treated water and be sure to remove as many air bubbles as possible.
5.Start loop pump and begin circulating the treated water.
6.Run treated water for at least 12 to 24 hours to ensure loop is properly flushed and treated.  While using for longer periods of time doesn’t have negative effects, Sysprep is not an effective final coolant and should be replaced with coolant before any extended use of computer.
7.Drain System. Inspect drained water for debris or foreign particles. Dispose of drained water. Repeat flush if needed.
8.Fill loop with your choice of coolant and begin water-cooling.**

** Residual treated water left in your loop is not harmful. If you prefer to remove it, do a simple rinse of the loop with fresh DI or Distilled Water. This rinse will not affect the results of the Sys Prep just performed.

Warnings:Do not mix with any pre-mixed coolants as it will over saturate the inhibitors.
PrimoChill is not responsible for any hardware damage. Use at your own risk.

The PrimoChill Rad Clean – Radiator Cleaning Treatment is a solution for cleaning radiators outside of a loop. By using this cleaner you can “”scrub”” the inside of your rad without fear of damaging other components, seals or acrylic! This solution is easy to mix, easy to use, and gets you ready to go!
Specifications

Compatibility
Rad Clean is compatible with the internal metals found in radiators only! Using Rad Clean on nickel items is NOT compatible!
Instructions
For this pre-treatment to work correctly follow the instructions below. 
Step 1: Dilute one half bottle of RadClean into 32oz of distilled/Ro/Di water.
Step 2: Fill radiator up with Radclean mixture
Step 3:Close both ports with plastic fillports. Ensure they’re plastic. Shake radiator.
Step 4:Let your radiator sit for one hour.
Step 5:Drain radiator and flush radiator extensively with distilled/ro/di water
Step 6:Drain radiator and let dry completely.
Warnings
Important to use plastic fittings when cleaning radiators while using Rad Clean! PrimoChill is not responsible for any hardware damage. Use at your own risk.

For proper use: Always have water above the fill-line Pump life expectancy 1750 hours Empty reservoir and unplug when not in use. There may be times when you need professional quality treatment to help with injuries or chronic issues, but you would love to be able to get it the comfort and convenience of your own home and on your own time schedule. The Arctic Ice Cold Water Therapy System is hospital grade equipment, so you can receive the very best care whenever and wherever you need it. The Arctic Ice Cold Water Therapy System gives your body localized support that goes straight to the problem. The circulating ice water therapy settings can cool and soothe inflamed areas for up to 8 hours and allow you to freely move your joints, unlike unsecured ice packs that can frustratingly change position and fall off with any movement you make. The cryo-cool system circulates cold water for about 5 hours, continuously supplying cold to the area that needs it the most. Hi/low settings a 15-minute incremental timer, an easy-open lid, and auto shutoff help you to take control of your own treatment. As effective as this type of therapy is, you should always check with a doctor about whether a cold water therapy machine is right for you and get their recommendations on what specifications are best for your personal needs. This PMT product is covered by a limited 90 day warranty.

Semoic，a legal trade mark, has been registered. Only those who are authorized are available to sell items under Semoic. Semoic will bring you joyful shopping experience. Primary Aluminum alloy Water Cooling Block 40x40mm for Liquid Water Cooler Heat Sink System Silver Use For PC Laptop CPU
Color: Silver
Material: Aluminum alloy
Size: 40 (D) x 40 (W) x 12 (H) MM
Weight: 35g
Package included:
1 x CPU Water cooling
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.

Product Name: Water Cooling Radiator

Product Specifications:
– Fitting Thread: G1/4 Inch;
– Fin density: 18 lines per inch
– Color: Black; Product Weight: 106g
– Type: Water Cooling; Material: Aluminum
– Mouth: 9.5 (D) mm; Model Number: 80mm;
– Longer Screw Size: 31 x 3 mm / 1.2” x 0.12”(L*D);
– Size: 105 x 80 x 37 mm / 4.1” x 3.1” x 1.5”(L*W*H);
– Tube Quantity: 8; Fit ID Tube Inner Diameter: 8 -12mm / 0.3” – 0.5”
– Fit ID Tube Outer Diameter: 9.5 mm / 0.37”; Shorter Screw Size: 7 x 3 mm / 0.3” x 0.12”(L*D)

Product Features:
– Pure aluminum fins
– Parts brazing seal as a whole
– Surface treatment: Dark paint
– Joint: disposable stainless steel-band
– The sealing process: vacuum aluminum brazing
– Item Type: Computer Radiator Water Cooling Cooler; Material: Metal
– Can be installed 80mm fan, mounting hole size: 69.5（D）×69.5（W）mm

✔Optimized for high performance at low cost,No weak welds nor leakage.
✔Suitable for computer CPU cooling, industrial frequency conversion driver, laser head cooling, air conditioning evaporator and industrial control cabinet cooling.

Package Included:
1 x Aluminum Heat Exchanger High speed fan
NOTE: Screw holes below is channel pipe, so make sure not to use long screw, will top leaking.

Conclusion

By our suggestions above, we hope that you can found water cooling treatment for you.Please don’t forget to share your experience by comment in this post. Thank you!